Juostinis pjūklas - automatinis

KASTO tec AC5

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 66 600 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, We offer you the following: Technical Data: Control system: Heidenhain iTNC 530 HSCI Travel distances: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Clamping surface: 600 x 500 mm - Max. table load: 400 kg Podpfxsxgnz Ts Ah Hspl - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary tilting table including table cooling - BLUM NT laser tool measurement system - Calibration arbor with tool holder - Wireless touch probe, Heidenhain TS 649 - 3D quickSET preparation - Scraper-belt chip conveyor - ICS (internal coolant supply), 40 bar, 600 l tank, incl. rotating sight glass, air purge, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator - Air blast through spindle center - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of zero-point clamping system - Selection and deselection of handling system via switch on the machine control panel - incl. additional rinsing inside the working area - incl. machine preparation for job management - incl. control panel arrangement on the left - Energy supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology - incl. rotary union extended to 4 channels Power-on hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the images is not included in the scope of delivery. The machine will be available approximately from October/November 2025. The ball screws and linear guides in the X and Z axes have been renewed. Accessories, depicted tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change and prior sale. Errors excepted!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Used straightening press in very good condition for sale. Ppedjufhzvjpfx Ah Hol This universal and robust Stierli straightening press is equipped with a 5m straightening beam. It is capable of processing beams up to HEA-600 and HEB-600 (with S-235). The machine is operated with Stierli’s proven stroke fine adjustment control, making it very easy to use and enabling fast, precise straightening and bending operations. Additional options can be added upon request, such as powered roller conveyors, NC control, laser measurement, etc. (Note: The photo does not show the original machine.)

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2014, keliamoji galia: 180 kg, rankos pasiekiamumas: 2 900 mm, We at Binici MB GmbH have additional industrial robots available in-house. Podpjwxxzwofx Ah Hspl All our robots are fully functional and come with complete accessories. We are happy to assist you with professional advice.

Sąlyga: naudotas, Gamybos metai: 2017, mašinos/transporto priemonės numeris: 119, Ref. No. 24217 Technical Specifications: Psdpfx Ahotpnplo Hepl - Max. working width: 2520 mm - Max. material thickness at 40 kp/mm² tensile strength: 3.5 mm - Adjustable bending angle (pre-selectable) - Upper beam drive: 400 V / 1.1 kW - Bending beam drive: 400 V / 4.0 kW - Required space: approx. W 3900 x H 1550 x D 1200 mm - Weight: approx. 4500 kg

Sąlyga: naujas, Elektriniu valdymu kamera krosnis, gamintojas VEI Tipas: KO_EB Apytaka: horizontali oro cirkuliacija Maks. krosnies temperatūra: 650°C Pedpfxjipvgio Ah Hepl Vidiniai matmenys (P x A x G): 800 x 800 x 1000 mm Šildymo galia: 51 kW Cirkuliacinio variklio galia: 5,5 kW Maitinimo galia: 61 kVA

Sąlyga: naujas, Pre-bending: 6.0 mm Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » at 3x top roll diameter Pre-bending: 6.0 mm » at 1.5x top roll diameter Top roll diameter: 230 mm Bottom roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm Ppsdpod Ab H Hsfx Ah Hol • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital readout for side roll positions • Hydraulic drop-end bearing • Device for conical bending • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torque shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment comply with CE regulations Catalog available at the following link: Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be a maximum of 30% or more than 60% of the roll length • Hardened rolls are recommended

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2012, Load capacity: 4,500 kg Height: 2,705 mm Lift height: 5,675 mm Ppedpfxjwvtf So Ah Hel Mast type: Triplex Fork length: 2,400 mm Drive: Electric Including fork positioner Including side shifter UVV inspection and maintenance newly performed

Sąlyga: geras (naudotas), Gamybos metai: 2001, Manufacturer: BEHRINGER Model: HBP 530 A Year of manufacture: 2001 Specifications Metric US Standard Pjdpfxsu U Naro Ah Hspl Capacity 90° 530 x 530 mm Min. cutting length 40 mm Max. cutting length 17 - 110 mm Power 12 kW Chip conveyor Yes Dimensions (approx.): Length 4000 mm Width 2250 mm Height 3270 mm Weight 4400 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith; however, accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend verifying all critical details.

Sąlyga: naujas, Gamybos metai: 2023, Cutting diameter: 1100 mm Saw band length: 11000 x 67 mm Cutting width: 1.6 mm Cutting capacity at 90 degrees, square: 1100 x 1100 mm Cutting capacity at 90 degrees, flat: 1100 x 1300 mm Total power requirement: 7.5 kW / 3100 Nm Machine weight: approx. 8,700 kg Space requirements: approx. 2800 x 1700 x 5200 mm The KSY 1100 x 1300 is a semi-automatic, column-guided horizontal bandsaw. This machine is available for immediate delivery. Chips are removed via a conveyor screw. A chip trolley approx. 60 x 50 x 40 cm is included in the scope of delivery. The roller tables can be controlled forward and backward via the control panel. On the outfeed side there is a roller table measuring 1.40 x 1.00 meters. On the infeed side there is a motorized roller table measuring 2 x 1.40 meters. Optional Specifications Pjdpfxotq Dw Ee Ah Hopl - Motorized system for roller table - Laser line - Additional double roller table - PLC screen - Anti-vibration system The images are for orientation purposes only and do not represent a true-to-scale depiction of the machine.

Gamybos metai: 1998, Sąlyga: beveik kaip naujas (naudotas), Laser type: Q-switched pulsed solid-state laser Laser medium: Nd:YAG Wavelength: 1064 nm Beam diameter: approx. 1.2 - 1.3 mm after output coupling mirror at TEM00 Beam divergence: 5 mrad multimode, 2 mrad TEM00 Pulse duration (time): CW / 90 ns Max. output power: 65 W (130 W optional) in multimode, 16 W in single mode Pjdpfjd Dhw Njx Ah Hjpl Pulse energy: 16 mJ (30 mJ optional) at 3 kHz Operating modes: CW, Q-switched from 0.1 to 100 kHz Beam deflection system: Galvanometer system Line width in mixed mode: approx. 0.12 mm