Automatinė juostinė pjovimo staklės Kasto 260

KASTO SSB 260 VA

Būklė: naudotas, Gamybos metai: 1989, Pjovimo greitis 15–125 m/min Pjūvio skerspjūvis 260 mm² Pjūklo juostos ilgis 4.115 x 41 x 1,1 mm Pjovimo matmenys 260 x 260 mm Hjdpfxsywzw Sj Af Doff Juostinis pjūklas | KASTO - SSB 260 VA Įrenginys gerai prižiūrėtas. Atkreipkite dėmesį, kad techniniai duomenys buvo perimti iš panašių įrenginių.

Gamybos metai: 2002, būklė: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam - 75°: 1008x402mm - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Hsdpfx Afehzbipo Dsff Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Būklė: naudotas, Gamybos metai: 1993, Pjovimo greitis: 15 - 125 m/min Pjūvio skerspjūvis: 260 mm Pjūklo juostos ilgis: 4 115 x 41 x 1,1 mm Pjūvio plotis: 260 x 260 mm Juostinis pjūklas | KASTO - SSB 260 VA Įrenginys yra prižiūrėtos būklės. Hfsdpfx Asywzxcjf Dof Atkreipkite dėmesį, kad techninės specifikacijos priskirtos pagal panašius įrenginius.

Būklė: naudotas, Gamintojas: KASTO Hjdpfoxcnppox Af Deff Modelis: SSB 260 VA Maks. pjovimo dydis: 260 x 260 mm / Skersmuo: 260 mm Svoris: 1915 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2020, veikimo valandos: 3 300 h, - NAUDOTAS - 4 AŠIŲ HORIZONTALI APDIRBIMO CENTRAS SU PALETĖS KEITIKLIU X AŠIES EIGA: 1050 mm Y AŠIES EIGA: 900 mm Z AŠIES EIGA: 1000 mm ATSTUMAS TARP VEŽIMO NOSIES IR STALO: 100 - 1100 mm GREITAS JUDĖJIMAS X-Y-Z: 60 m/min VERPTUVAS: 10000 aps/min; 25-45 kW; 600 Nm; ISO 50 - BT PALETĖ: 2 VNT; NEPERTRAUKIAMAI; 630x630 mm MAKSIMALUS LEISTINAS APKROVIMAS: 1500 kg MAKS. APDIRBAMŲ DETALIŲ MATMENYS: ø1050 x 1350 mm Hjdoxvfuvepfx Af Djff ĮRANKIŲ MAGAZINAS: GRANDININIO TIPO; 90 VIETŲ VALDYMO BLOKAS: FANUC 31i SVORIS: 18000 kg BENDRI MATMENYS: 6520 x 3930 x 3495 mm PRIEDAI: DROŽLIŲ KONVEJERIS; ĮRANKIŲ MATUOKLIS

Būklė: naudotas, Gamybos metai: 1991, mašinos/transporto priemonės numeris: 113307651086088, Funkcionalumas: visiškai funkcionalus, pjovimo aukštis (maks.): 260 mm, bendras aukštis: 2 100 mm, bendras ilgis: 2 200 mm, bendras plotis: 2 100 mm, juostinio pjūklo ilgas: 4 115 mm, pjūklo juostos plotis: 38 mm,

Gamybos metai: 2020, būklė: paruoštas naudoti (naudotas), A compressor system from the plant manufacturer Rico, consisting of two Atlas Copco compressors, two refrigerated air dryers, and an oil-water separation system (Beko, also by Atlas Copco), is available. 1) Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air delivery rate: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Hsdpfxoxdc Uve Af Doff 2) Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. 3) 2x refrigerated compressed air dryers Atlas Copco FX 15, air flow rate: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant quantity: 2050g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900mm/750mm/1000mm, weight: approx. 160kg. 4) Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, controls: 2-6 compressors. 5) Oil-water separation system Beko ÖWAMAT 15, flow capacity range: 6 m³-30 m³/min, oil outlet: DN40, tank volume: 115.5 l, fill volume: 84.3 l, oil collection container: 2x10 l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8,656 h, controller hours: 42,334 h. Documentation available. On-site inspection possible.

Būklė: naujas, TECHNICAL DATA Type: gas-fired pass-through chamber furnace Internal dimensions (W x H x D): 2200 x 2350 x 3000 mm Hsdpfx Afeg Dgymo Doff Number of control zones: 2 Maximum charge weight: approx. 2.5 t Control system: Siemens S7

Būklė: naudotas, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 40 [kW] - Spindle speed: 12,000 [rpm] Hfjdpfx Aew Ephbjf Djf - Gearbox - Number of spindle speed ranges: 2 LINEAR AXES - Travel X/Y/Z axes: 2400/1650/1750 [mm] - Rapid traverse speed (X/Y/Z): 42 [m/min] - Feed rate (X/Y/Z): 20 [m/min] SWIVEL AXIS B - Travel: 360 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Bras charger - Number of tools in magazine: 116 - Tool change time: 3.8 [sec] PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1600 x 1250 [mm] - Number of pallets: 2 - Max. pallet load: 5000 [kg] - Distance from table centre to spindle nose: 100 - 1750 [mm] - Max. workpiece diameter: 2500 [mm] - Max. workpiece height: 1850 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive capacity: 86 [kVA] WEIGHT AND DIMENSIONS - Required space: 9,485 x 6,155 [mm] - Machine height: 4,370 [mm] - Machine weight: 50,000 [kg] MACHINE HOURS - Operating hours: 15,446 [h] ACCESSORIES - Controller: Fanuc 31i-model B5 Interface: Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic hand wheel - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 70 [bar] * internal coolant supply (IKZ) * with paper filter * with coolant chiller * with rinse gun * with cabin wash - Chip conveyor - Spindle cooling - Tool probing system - Workpiece probing system: Renishaw RMP60 - Tool breakage monitoring: SOFT AC - Number of pallets: 2 - Vise - Tool holder

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 450 mm, veleno greitis (min.): 25 aps./min, veleno greitis (maks.): 6 000 aps./min, X ašies eiga: 213 mm, Z ašies eigos atstumas: 450 mm, greitas poslinkis X ašimi: 24 m/min, greitasis eiga Z ašyje: 30 m/min, strypo praėjimas: 65 mm, CNC Siemens 840 D Working Area Max swing diameter over bed: 505 mm Swing diameter over X-slide: 375 mm Chuck diameter: 210 mm Bar capacity: 65 mm Cross travel (X): 213 mm Longitudinal travel (Z): 450 mm Feed Rates Rapid traverse X/Z axes: 24/30 m/min Main Spindle Spindle nose (flat flange): 140 h5 mm Front bearing diameter: 100 mm Hfodpfx Asw Adhwef Dof Main Spindle Spindle motor power (40/100% DC): 16/12 kW Torque (40/100% DC): 153/115 Nm Spindle speed: 25 - 6000 rpm Tool Turret Number of tool positions: 12 Number of driven positions: 12 Shank diameter (DIN 69880): 30 mm Driven tool motor power (40% DC): 9 kW Max. torque (40% DC): 20 Nm Max. speed: 4500 rpm Tailstock Automatic tailstock travel: 450 mm Quill taper: MT 4 Max. tailstock thrust: 400 daN Machine Equipment: • Chip conveyor • Fume extraction prep • 2 axial driven tool modules • 4 radial driven tool modules • Fixed tool holders