Automatinis juostinis pjūklas - horizontalus

KASTO SBA 260 AU

Būklė: geras (naudotas), Gamybos metai: 1998, bendras aukštis: 1 700 mm, bendras ilgis: 2 100 mm, bendras plotis: 2 260 mm, bendras svoris: 1 300 kg, Apvalaus plieno pjovimo diapazonas ties 90°: 260 mm, Automatic band saw, cutting capacity Ø 260 mm, 90° cut, infinitely variable band speed from 17 to 110 m/min, 2.3 kW dual-speed motor, coolant system, chip conveyor, piece counter, variable speed gearbox, adjustable hydraulic material clamping, dimensions 2260x2100x1700 mm, weight approx. 1300 kg, Hsdemxliwjpfx Admsnk

Būklė: naujas, Suction capacity at filter unit nozzle*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or special colours available on request Application: Hodpoh Rdwxsfx Admenk Extraction of oil mist and smoke, suitable for small to very large machine workspaces | Oil mist separator Advantages of the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC as standard (digital filter control) - Electronically regulated EC fan as standard - Adjustable speed and air flow - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of air flow capacities available - Can be adapted to pollutant load and air flow requirements - Extensive range of installation and connection accessories - Quality Made in Germany We developed the ELBARON® filter series for use in metalworking with straight oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most powerful filters on the market and are used worldwide. Our filter units are already fully digitalized as standard and can, for example, be controlled via laptop. The ELBARON® product range includes 18 device variants and can be optimally configured in terms of size and capacity for your specific application. ELBARON® units impress with long service life and total operational reliability. Our electrostatic filter cells are dimensioned to provide the best possible filtration efficiency, service life, and trouble-free operation while maintaining economic efficiency.

Būklė: beveik kaip naujas (parodų įrenginys), ►►► FRONIUS TPS 3200 SET OFFER Hnsdpfowbil Sox Admok ✅ Scope of supply: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard with Flow Control, Thermocontrol, and coolant filter. The cooling unit switches off if the water cooling fails or overheats to protect the torch package. These features would typically cost around €400 extra at Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our view the most functional wire feed case, as the wire spool is safely stored in the closed case. ➤ Fronius Long Intermediate Hose Package – Each set is supplied with a 5-meter connecting hose between the power source and wire feed case, providing more flexibility and better handling. Take the wire feed unit from the main machine to hard-to-reach areas! The connecting hose is neatly mounted on a hook at the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with gas bottle holder available on the market. ➤ Binzel Torch Package – With up/down regulation of amperage directly at the torch. ➤ Ground Cable 3-4m ➤ New pressure regulator from Messer ➤ New basket spool adapter for large wire spools This machine enables welding of almost all materials, including aluminium, steel, and stainless steel (V2A). It features pulse wire programmes and is also suitable for MIG brazing (CuSi), which is frequently used in the bodywork sector. Further options available at extra cost For example: Fronius AW4000/AW5000 Job Master torch package (display on the torch) + EUR 550.00 ----- IMMEDIATELY AVAILABLE FULL INVOICE PROVIDED Inspection possible in Vienna 1230, Austria! ✔ Insured pallet shipping without issue! ✔ We are also available on WhatsApp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What condition are the machines in? To clarify: We purchase nearly new used machines, disassemble and meticulously inspect them, replace any worn parts if necessary, and only after a successful test weld do we release them for sale. "All" machines are clean, with no burn holes in the displays and no significant burn marks or dents scattered across the units! You are buying an item that is also ⭐visually appealing and does not look run-down! ►►►Will we receive an invoice when buying from you? Yes, you will receive a proper invoice. If you possess a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment options are available? Prepayment or cash upon personal pickup. ►►►Why buy from us? We are specialists in this Fronius welder series, always stocking 60-80 units – exclusively Fronius, no other manufacturers! We know these machines in detail and do not sell anything we are not thoroughly familiar with.

Būklė: naujas, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650 x 450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Bandsaw K-tech DG 62/45 HA-I • 2-column miter saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation due to inclined cutting, feed rate and cutting pressure control • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning) • Energy-efficient and low-vibration operation through inclined cutting • Ergonomic, safe, and freestanding control panel • Frequency-controlled saw drive 15 - 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-diameter flywheels (520 mm) • Clear mitre adjustment up to 60° Hnjdpfx Aded Iipmjmsk Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid downfeed to start of material or cut immediately for serial cuts 4. Saw blade off 5. Raise frame just above the material 6. Vise opens

Būklė: geras (naudotas), Gamybos metai: 2012, CNC portalinis plazminio pjovimo staklė Gamintojas: Microstep Tipas: SPL PAA 9001.25 Pagaminimo metai: 2012 CNC valdymas Darbinis plotas: 2.500 x 9.000 mm Hjdpfju U Hm Aox Admenk 1 plazminis degiklis su Kjellberg HiFocus 280i srovės šaltiniu 2 autogeniniai degikliai su propanu Vibracinis tiekimo stalas Beuting Filtravimo įrenginys Donaldson DFPRO12 lauko montavimui 16426ä

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Prima Industrie Platino 1530 laser cutting machine with only 4,300 cutting hours This Prima Industrie Platino 1530 laser cutting machine, 4.0kW CO₂, was manufactured in Italy in 2011 and installed at the end of 12/2011. Equipped with a PRIMACH 20 L control unit. Hnsdpfeivg Hgjx Admok

Gamybos metai: 2006, būklė: visiškai atnaujintas (naudotas), HYDRAULISCHE PRESSE MECAMAQ PRESSKRAFT: 350 t HUB: 350 mm TISCHABMESSUNGEN LINKS-RECHTS: 600 mm TISCHABMESSUNGEN VORNE-HINTEN: 750 mm LEISTUNG: 15 kW Abmessungen: Hnodpfjfmqqlsx Admok Höhe: 2,9 m Breite: 1,9 m Länge: 1,3 m Gewicht: 5.700 kg

Būklė: naudotas, Gamybos metai: 2012, X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control: Siemens 840 D Rotary table: 800 mm C-axis: 0.001º (±360º) B-axis (table): º mm Spindle speed: 18,000 rpm Tool holder: HSK 63 Tool changer: 38 positions Internal coolant supply: 80 bar Total connected load: 43 kVA Machine weight approx.: 10.6 t Hermle C 40 U Machining Center 5-axis Hnedpjyxy E Rjfx Admjk KinematicOpt Adjustable operator panel 2 machining tables, Schunk zero-point clamping system Additional tool magazines: 43 positions Blow-off device Air blast through spindle center Chip flushing gun Spindle cooling Electrical thermal compensation Electronic handheld control module Measuring probe: Renishaw BLUM tool breakage monitoring Additional hydraulics for hydraulic workpiece clamping The above technical data are provided by the manufacturer or operator and are non-binding for us. Intermediate sale reserved; exclusively our general terms and conditions apply. About us: More than 400 own machines in stock Over 15,000 m² warehouse space, crane capacity 70 t More than 10,000 accessories for your workshop If you wish to sell machines, production lines, or your company, please contact us. Further offers can be found on our website. Viewings possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Būklė: naudotas, Gamybos metai: 2007, Techniniai duomenys: x eiga: 635 mm y eiga: 460 mm z eiga: 510 mm Valdymas: 3D Heidenhain i TNC 530 Stalo dydis: 790 x 560 mm Stalo apkrova: 600 kg Įrankių tvirtinimas: SK 40 Sukimosi greitis: 20 - 12 000 aps./min. Įrankių magazinas: 20 vietų Veleno darbo valandos: 36 050 h Įjungimo valandos: 91 000 h Hnsdow A I Uujpfx Admjk Bendras energijos poreikis: 13,9 kW Mašinos svoris apie: 3,6 t Sukimosi greičio diapazonas: 20–10 000 aps./min Įrankių keitiklis: 20 pozicijų Mašinos išmatavimai (IxPxA): apie 3,0 x 2,0 x 2,15 m

Būklė: geras (naudotas), X-axis travel: 410 mm Y-axis travel: 310 mm Z-axis travel: 400 mm Main spindle taper: SK 40 Clamping surface of table: 700 x 280 mm Spindle speed: 45 - 2000 rpm Quill stroke: 63 mm Total power requirement: 2.2 kW Machine weight approx. 1,300 kg Hsdpfsi Elydsx Admonk Space requirement approx. 2.1 x 2.1 x 1.7 m Voltage: 400 V 3-axis digital readout Heidenhain Fixed angular table Coolant system Swiveling vertical milling head