Suspausto oro bakas

Karl Kremsmüller/Engelbert

Gamybos metai: 2021, Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3815407, WEIGHT 8000 KG FEM ISO 1Am M4 KW 2.4/15.5 (50 Hz) Nkedpfx Agot Nhqysieu MAXIMUM CAPACITY 16 TON

Sąlyga: naudotas, Gamybos metai: 2014, Drive power: 3 kW Operating pressure: 7 bar Air delivery (flow rate): up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Chicago Pneumatic CPVR15 CE screw compressor – Year of manufacture: 2014 Nkjdpsh A Sfdofx Agiou The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications—this compressor reliably supplies the compressed air you need. Drive power: 3 kW Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Application: workshops, craft businesses, industrial applications with medium compressed air requirements Scope of delivery: 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigerant dryer - OMI ESD 108 - 0.70 kW 1x Beko Öwamat 2 - oil-water separator Technical data taken from publicly available sources.

Sąlyga: visiškai atnaujintas (naudotas), SCHLATTER MG24 Welded Mesh Production Line Completely Refurbished WORKING RANGE Panel width: max. 2,500 mm Weft wire length: min. 900 mm Weft wire length with QF5 distributor: min. 300 – 1,600 mm Maximum spacing between outer warp wires: 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Minimum spacing between warp wires: 100 mm Spacing between weft wires: 25 – 250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24 MG 24.1/8C MESH WELDING MACHINE, Standard Equipment Includes: Nksdpowu Tu Defx Agiou - 1 Machine base frame - 1 Upper support for press reception, continuously adjustable via handwheel - 1 Magnet holders with holding magnets and monitoring of weft wires - 1 Row of pneumatic solenoid valves for press actuation - 1 Air and water system - 2 Pneumatic rotary drives with oil damping - Static torque with 5 bar compressed air: 480 Nm - Continuously adjustable front from 25 – 250 mm, adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION Includes: - 8 C-type transformers - Rated power per transformer: 100 kVA - Secondary open-circuit voltage: 7.1 V - Secondary rated current: 14 kA - 8 ES 130 thyristor contactors - 12 Welding presses: 5.0 kN - 12 Warp wire current bridges for 50–100 mm warp wire spacing - 12 Warp wire current bridges for 100 mm stepped warp wire spacing - 10 Warp wire current bridges for 100–150 mm warp wire spacing - 8 Warp wire current bridges for 150 mm stepped warp wire spacing - 6 Warp wire current bridges for 150–200 mm warp wire spacing - 6 Warp wire current bridges for 200 mm stepped warp wire spacing - 24 Lower copper electrode holders with standard angular electrodes, each with a water-cooled current cable, width: 58 mm - 24 Wire holding clamps Panel width: max. 2,500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 – 1,600 mm Spacing between extreme warp wires: max. 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Spacing between warp wires: min. 100 mm Weft wire spacing: 25–250 mm Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, We offer for sale a complete multi-point automatic steel wire welding line by SCHLATTER. We have three fully operational production lines available. Automatic machines for the production of cross wires (so-called straighteners with cut-off units) are also available. Additionally, we have a wide range of individual spot welders for steel wire. Nkodpjtvpiljfx Agisu

Sąlyga: labai geros būklės (naudotas), Line for door frames (casings), for cutting, milling of strike plates, and inserting hinges (ANUBA) comprising: X10030A) Discharge conveyor X10030B) Transfer unit X10030C) Double cutting and drilling machine "AMS" - 45° left-side cut – Drilling - 90° cut - 45° right-side cut – Drilling Nkjdoqwycljpfx Agieu X10030D) Angle conveyor (90°) X10030E) Anuba hinge insertion machine "MASTERWOOD" model MULTITEC X10030F) Strike plate milling machine "MASTERWOOD" model Teknomat 3000

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, X ašies eiga: 3 500 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 770 mm, greitas poslinkis X ašimi: 30 000 m/min, greitas poslinkis Y ašis: 30 000 m/min, greitasis eiga Z ašyje: 30 000 m/min, stalo plotis: 1 000 mm, stalo ilgis: 4 150 mm, stalo apkrova: 4 000 kg, 3-Axis Machining Center Nodpfx Agewycmmsisku Hedelius - BC 100 MAGNUM X-axis travel: 3500 mm Y-axis travel: 1000 mm Z-axis travel: 770 mm Table length: 4150 mm Table width: 1000 mm Table load capacity: 4000 kg X-axis feed rate: 30,000 mm/min Y-axis feed rate: 30,000 mm/min Z-axis feed rate: 30,000 mm/min Tool holder: ISO 50/BT/MK Spindle power: 50 kW Spindle speed: 4,500 rpm Tool changer: 50 positions Number of controlled axes: 3 Chip conveyor: yes Coolant system: yes Length: 8,000 mm Width: 5,000 mm Height: 3,700 mm Weight: 30,000 kg

Sąlyga: paruoštas naudoti (naudotas), bendras aukštis: 3 300 mm, bendras plotis: 3 450 mm, bendras ilgis: 6 000 mm, valdiklių gamintojas: Siemens, tuščias svoris: 17 000 kg, Modelis: FTV 850 Vėsinimas per špindelį Darbo sritis gali būti padalinta į dvi dalis 2 magnetiniai stalai Judanti kolona, panaši į Mazak VTC / Unisign / Hedelius Tvirta važiuoklės konstrukcija Nedswxz D Uopfx Agioku Išilginis X ašies eigos ilgis: 1800 mm Skersinis Y ašies eigos ilgis: 850 mm Z ašies eiga (aukštis): 800 mm Prispaudimo zonos matmenys – stalas: 2300 x 900 mm Universalus (2x 360°): ISO 50 Gręžimo galva (1 x 90°): 19 kW

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, Hydraulic Double-Column Press 400 T with Sliding Table Press Type: Double-Column Press Njdpfeph Uk Nsx Agieku Thermal Neutral Range: 80 – 120 °C Number of Operator Sides: 1 side Forces: - Maximum Pressing Force: 4000 kN - Maximum Uplift Force: 400 kN - Pressure Build-Up Time (Closed Tool, Steel on Steel): Max. 4 seconds Dimensions: - Length: 3,800 mm - Width: 4,475 mm - Maximum Opening Width: 800 mm - Stroke: 800 mm - Table Height above Floor: 1,100 mm - Total Height above Floor (Construction Height): approx. 4,300 mm - Minimum Hall Height: 5,500 mm Parallelism Deviation at 20°C: +/- 0.1 mm Deflection: - Determined at maximum closing force with 70% utilization:

Gamybos metai: 2023, Sąlyga: naujas, SONDA ist eine wirtschaftliche Lösung zur Anschaffung einer Ultraschall-Reinigungseinheit. Wenn Sie bereits über einen eigenen Edelstahltank verfügen und diesen in eine Ultraschallwascheinheit umwandeln möchten, ist SONDA die ideale Wahl. Wir fertigen SONDAs unabhängig von den Abmessungen Ihres Tanks. Sagen Sie uns einfach die Maße Ihres Tanks, und Sie können die Einheit unkompliziert an Ihrem Behälter montieren. Funktionsprinzip: Nsdpfx Aod I E Ivegisku - Jede einzelne, eintauchfähige SONDA-Einheit arbeitet mit ihrem eigenen, separaten Hochfrequenzgenerator. - Die eintauchbaren SONDA-Einheiten sind montagefertig für die Tankwand vorbereitet. - Ideal für große Behälter in der Beschichtungs- und Oberflächenbehandlung. Eintauchschwinger, Ultraschallreiniger, Schwinger, Ultraschall Für technische Spezifikationen stehen wir Ihnen gerne zur Verfügung.

Gamybos metai: 2009, Sąlyga: naudotas, Technical Details: Tool holder: Ø 54 mm Voltage: 3-phase AC 400V / 50–60 Hz Compressed air connection: 6 bar Total power requirement: 11 kW Total weight approx.: 120 kg Dimensions L x W x H: 0.7 x 0.65 x 1.7 m Induction shrink-fit machine with water cooling (30-litre tank integrated in the housing) Application: for ultra-fast tool changing via targeted induction heating Cooling medium: Emulsion For tools Ø 3–50 mm (solid carbide) and Ø 6–50 mm (HSS) Tool holder Ø 54 mm Njdpfx Aowp I S Hegisku Runout accuracy < 0.003 mm ThermoGrip shrink chuck ISGS 3200-1, Ø 3–32 mm Operation via control panel