Pratraukimo staklės vertikali

Karl Klink RSI-2,5

Būklė: geras (naudotas), Ištraukimo / staklės KARL KLINK RSI 2,5 EH -Gamybos metai: 1965 -Traukimo jėga: 2500 kg / (25 kN) -Pjaustymo greitis: nuo 1 mm/min iki 9 mm/min (bežingsnis reguliavimas) -Maks. eiga: 800 mm -Maksimalus ruošinio skersmuo: apie 250 mm -Variklis apie 3 kW -Aušinimo skysčio sistema -Traukimo jėgos indikatorius -Traukimo jėgos ribotuvas -Įvairūs kreipiamieji įvorės (žr. nuotraukas) -Staklių kojelės Blodpjymz N Eefx Akuei Matmenys: Ilg.xPlot.xAukšt. 1,1x0,7x2 m / Svoris 1600 kg Galimi netikslumai / įvedimo klaidos.

Būklė: geras (naudotas), Gamybos metai: 2006, 1 used 4-axis horizontal machining center Manufacturer: Haas Model: EC 1600 Year of manufacture: 2006 Travel distances X-axis: 1626 mm Y-axis: 1270 mm Z-axis: 813 mm Spindle centerline to table: 304 mm Spindle SK 50 Max. rated power: 22.4 kW Max. speed: 7,500 rpm Max. torque: 460.0 Nm at 700 rpm Table dimensions Length: 1626 mm Width: 914 mm Width of T-slots: 16.00 mm T-slot center distance: 125 mm Number of standard T-slots: 7 Max. load capacity on table (evenly distributed): 4,536 kg Integrated 4th axis (B axis) Table: 1626 mm x 813 mm Clamping surface diameter: 762 mm Adjustment range: 360° Max. swing diameter of workpiece: 1,270 mm Table load: 4,536.0 kg Max. rated power: 3.7 kW Rotational torque (continuous): 2,712 Nm Backlash: 30 arc-sec Transmission ratio: 500:1 Braking torque: 5,423 Nm Minimum resolution: 0.001° Bodpfx Ajv N Di Askusli Indexing accuracy: ±30 arc-sec Repeatability: 15 arc-sec Rapid traverse on B: 36°/sec Max. feed rate for machining (B axis): 36°/sec Spindle centerline to table: 146 mm Max. feed rate for machining in X, Y, Z axis: 12.7 m/min Rapid traverse on X: 15.2 m/min Rapid traverse on Y: 15.2 m/min Rapid traverse on Z: 15.2 m/min Axis motors Tool changer: 30 stations Max. tool diameter (full): 102 mm Max. tool diameter (adjacent pockets empty): 254 mm Max. tool length: 508 mm Max. tool weight: 13.6 kg Tool-to-tool (average): 8.00 s Chip-to-chip (average): 12.60 s General information Coolant tank capacity: 360 L Dimensions Domestic pallet: 488 cm x 366 cm x 346 cm Export crate: 488 cm x 366 cm x 348 cm Weight: 13,608.0 kg

Gamybos metai: 1971, būklė: naudotas, Technical Details: Wheel diameter – max.: 300 mm Module – max.: 5 Module – min.: 0.5 Max. workpiece weight: 60 kg Approx. machine weight: 4.0 t Machine dimensions: 1800 x 1850 x 2500 mm Switch cabinet dimensions: No. 1: 1930 x 400 x 1920 mm Switch cabinet dimensions: No. 2: 800 x 230 x 1950 mm Exhaust unit dimensions: 1400 x 700 x 560 mm Cooling unit dimensions (LxWxH): 1.2 x 1.0 x 0.45 m Electronically controlled gear flank grinding machine For modules up to 5 and diameters from 240–300 mm Feed rate per workpiece revolution stepless: 0.4 – 3.2 mm Max./min. number of teeth: 130 / 12 Max./min. pressure angle: 30° / 14°30` Max./min. helix lead at 24 teeth: 6000 / 200 mm Max. helix angle, both sides: 45° Bodpjvc Apbjfx Akusli Grinding worm speed: 1900 rpm Without dressing device Equipment: Approx. 77 various change gears, extension tubes, and miscellaneous accessories Two of these machines are available for sale. Both machines are operated via two shared control cabinets and a common exhaust system.

Būklė: naujas, Gamybos metai: 2023, veikimo valandos: 10 h,

Gamybos metai: 2005, būklė: beveik kaip naujas (naudotas), Gebrauchte Bystronic PR 100, 8-Achsen CNC-Abkantpresse in hochwertigem Zustand zum Verkauf verfügbar BYSTRONIC PR100 x 3100, 100 t x 3100 mm, 8-Achsen CNC-hydraulische Gesenkbiegepresse, komplett mit Cybelec Modeva 10S Steuerung. Blodpehufktsfx Akuji Baujahr 2005 – seit Neuanschaffung vollständig durch Bystronic UK gewartet Technische Daten: • Baujahr: 2005 • Steuerung: Cybelec Modeva 10S • Hinteranschlag: programmierbar • Schutzvorrichtung: Fiessler AKAS • Presskraft: 100 Tonnen • Maximale Biegelänge: 3100 mm / 3 Meter • Erweiterte Einbauhöhe – wird noch bestätigt • Maximaler Hub: 315 mm • Eilgang: 180 mm/s • Biegegeschwindigkeit: 10 mm/s • Rücklauf: 150 mm/s • Ober- und Unterwerkzeuge enthalten • Fußschalter vom Typ „Wander“ • Insgesamt 8 Achsen: Y1, Y2, X1, X2, R1, R2, Z1, Z2 – 6-Achsen Hinteranschlag • Hydraulische Bombierung Lieferung und Montage inkl. Bedienerschulung können angeboten werden. Gerne beraten wir Sie und liefern auf Wunsch neue Werkzeuge, passend zur Fertigung Ihrer Blechprodukte auf dieser CNC-Abkantpresse.

Būklė: geras (naudotas), Gamybos metai: 2014, Technische Daten auf den Fotos ersichtlich. Blodpfx Akoufp Svousi Die von Hand gezeigten Teile sind nicht im Lieferumfang enthalten.

Būklė: naudotas, Gamybos metai: 2006, Full drilling diameter / mm Drilling depth / mm Number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces For sale is a specialized machine package – two perfectly coordinated systems for complete machining of long, heavy workpieces with the highest requirements for precision and efficiency. MACHINE 1 Froriep CNC Deep Hole Drilling Machine – The Pre-machining Specialist Year of manufacture: 2006 Control: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Bodpfx Ajuddimjkujli Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Chuck diameter: 900 mm Weight: approx. 47,000 kg Ideal for precision pre-drilling of deep holes – including faceplate, steady rest MACHINE 2 Irle Machine – High-Precision Finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed rate: 3 – 4,500 mm/min (stepped) Center distance: 11,000 mm Swing diameter over bed: 1,250 mm Steady rest clamping range: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tons Max. external diameter: 850 mm Perfect for fine boring, honing, and demanding finishing processes with up to 50,000 Nm torque. Your advantages at a glance - Complete solution from a single source – from pre-drilling to final machining - Large workpieces up to 11 meters and 10 tons - High process reliability due to perfect machine synchronization - Ready for immediate use, well-maintained, and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics, and large part manufacturing

Būklė: naudotas, Gamybos metai: 1997, Techninės detalės: Didžiausias modulis: 7 Mašinos svoris apie: 5 t Šlifavimo sraigto skersmuo: 280-350 mm Bjdpfsx Aq Egox Akusli Šlifavimo sraigto plotis: 84-104 mm Mažiausias dantų skaičius: 6 Didžiausias dantų skaičius: 600 Didžiausias leistinas galvos apskritimo skersmuo: 360 mm Maks. ruošinio svoris: 60 kg Be filtro Su hidraulinės alyvos aušinimu ir šlifavimo alyvos grąžinimu

Būklė: geras (naudotas), Gamybos metai: 1998, Max. pitch circle diameter external gearing: 300 mm Max. pitch circle diameter internal gearing: 300 mm Max. outside diameter of workpiece (equipment): 450 mm Module – max.: 6 Gear width – max.: 100 mm Max. helix angle (with tool Ø 125 mm): +/- 45° Stroke rate – infinitely variable: 130 – 1300 strokes/min Workpiece weight: 1000 kg Minimum distance table surface – tool spindle: -55 / +300 mm Maximum distance table surface – tool spindle: 200 mm Maximum distance table surface – tool spindle: 350 mm Manual column side shift: +/- 25 mm Manual tool spindle swivel angle: +/- 0.5° Max. tool rotation speed: 15 rpm Max. workpiece rotation speed: 27 rpm Max. tool diameter: 7 inches Voltage: 400 V Frequency: 50 Hz Max. line current: 70 A Total power requirement: 48 kW Bsdpsvu E Nujfx Akuoli Machine weight: approx. 11 t Space requirement: approx. 4.27 x 3.11 x 2.87 m Main spindle taper: SK 45 Table bore: 40 mm Control: Siemens Sinumerik 840 C Gear shaping machine Gleason PFAUTER Mod. PSA 300 The CNC modular gear shaping machine with shaping cutter is designed for machining external and internal cylindrical gears with straight or helical involute toothing, as well as any other profile obtainable by generating or slotting methods. The working cycle is controlled by a CNC unit with dedicated software for gear machining. Field of application --> The PSA 300 is designed for manufacturing: - Gears with straight external teeth - Gears with straight internal teeth - Gears with external helical teeth - Gears with internal helical teeth

Gamybos metai: 1993, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 Bjdpfxocc D Ddj Akusli General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeder for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Chuck diameter for pull heads: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Features: The machine is equipped with a workpiece table and a pull bridge for 3 stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. The locking of the shank and end-piece holders is hydraulic. The machine comes with a coolant system with an integrated magnetic conveyor for chip removal, allowing operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale production. It is in very good condition and still retains its original paintwork. The machine is under power and can be inspected at our warehouse.