Šaltas diskinis pjūklas karbido tiesiu pjūviu

Kaltenbach MSK 471 NA

Sąlyga: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 10 000 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 105 mm, tekėjimo skersmuo: 610 mm, veleno greitis (maks.): 3 500 aps./min, veleno skylė: 70 mm, X ašies eiga: 580 mm, Y ašies eiga: 210 mm, Z ašies eigos atstumas: 1 137 mm, tvirtinimo skersmuo: 63 mm, sukimosi greitis (maks.): 6 000 aps./min, įvesties srovės tipas: Oro kondicionierius, Įranga: sūkių greitis be galo kintamas, The machine is in good condition. Major maintenance work in recent years: 30.04.2020 Milling spindle overhaul CHF 35,000 16.07.2021 Software update (Wenk AG) CHF 1,600 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: ·Error message at startup ·Coolant for internal cooling flows out at the rear side of the milling spindle Iedpfsxp Hmaex Af Isal ·Overload message when the machine is cold and rapid traverse is at 100% ·Over 150 various tool holders ·Spare bushings for the tool magazine ·Spare limit switches for the tool changer position monitoring ·2 pieces 3-jaw chuck, diameter 250 mm (mounted during inspection) ·1 piece 3-jaw chuck, diameter 250 mm ·1 piece 3-jaw chuck, diameter 300 mm ·1 piece 4-jaw chuck, diameter 400 mm ·2 sets hard jaws for external clamping, short version ·1 set hard jaws for external clamping, long version ·Various sets of soft jaws, used ·Replacement filters for the Kowap high-pressure unit (5 pieces in stock, approx. 2 pieces by delivery – 1 filter approx. 20-25 CHF) ·Coolant purification system or oil separator (custom-made) ·Cabinet suitable for the tool magazine, adapted for KM63 holders and numbered with 80 slots ·Specific clamping accessories suitable for KM63 holders, which allow direct clamping of indexable inserts ·Iscar side milling cutter suitable for one holder, D160mm, width 4mm ·Gear cutter suitable for one holder (custom-made – for soft jaws p=1.5mm) ·Cleaning/deburring brush suitable for one holder We can also provide you with leasing and financing offers for the machine. An inspection appointment can be arranged upon request.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2011, darbinis plotis: 1 300 mm, gerklės gylis: 410 mm, atstumas tarp stulpų: 960 mm, darbinis greitis: 20 mm/s, atbulinės eigos greitis: 20 mm/s, bendras svoris: 3 600 kg, bendras ilgis: 2 740 mm, bendras plotis: 2 140 mm, bendras aukštis: 2 317 mm, įėjimo įtampa: 200 V, spaudimo jėga: 36 t, darbinis ilgis: 1 300 mm,

Gamybos metai: 2016, Sąlyga: labai geros būklės (naudotas), Voortman V808 CNC Träger-Bearbeitungslinie – Baujahr 2016 (REF: STK‐1549) Coping-Roboter | Automatischer Ein- und Auslauf | 1,25 m Sektionen | Rollenförderer Kjellberg SmartFocus 300A Plasmaschneidanlage | Donaldson Absauganlage Isdpfolff H Esx Af Isal

Gamybos metai: 2011, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Boschert Tool Grinding Machine EASY SHARP Equipped for Trumpf tool system (Amada system optional) Iodjid I T Ispfx Af Ieal Machine for punch tool maintenance with cooling system and particularly powerful motor, therefore also suitable for use with diamond grinding wheels. Used machine is currently being overhauled Configuration for Trumpf tool system up to size III Accessories: Tool holder for flat and Whisper-style punches Die holders for sizes I, II, and III New corundum grinding wheel Diamond dresser Overhauled cooling system and machine base frame Technical data: Grinding wheel diameter: 175 mm Height adjustment: 150 mm Working area: 400 x 150 mm Motor power: 2.2 kW Motor speed: 2,825 rpm Optional: adapters for Amada system available Images similar

Sąlyga: naujas, Band saw machine Iodpocuntzefx Af Ieal Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Art. No.: 3680013 Condition: New machine Cutting capacity (round): 230 mm Cutting speed: 35/70 m/min Standard equipment includes: - Horizontal vice - Length stop (600 mm) - Electromechanical monitoring of saw blade tension - Chip removal brush - Coolant device - Operating manual

Sąlyga: geras (naudotas), Gamybos metai: 1992, mašinos/transporto priemonės numeris: 5164, Offer 23148 Technical Data: Iodsq Evn Eopfx Af Ijal - With hydraulic clamping and feed device - Cutting range round: 320 mm - square: 300 x 300 mm - Max. cutting length per single stroke: up to 400 mm - Multiple feed up to: 10 x 400 mm - Saw blade dimensions: 3660 x 25 x 0.9 mm - Cutting speed steplessly adjustable: 20 - 100 rpm - Feed rate hydraulically steplessly adjustable - Coolant system - Material support height: 720 mm - Saw blade drive: - Motor: 400 V / 2.5 kW - Space requirements approx.: W 1950 x H 1250 x D 1500 mm - Weight approx.: 1000 kg

Sąlyga: naujas, Gamybos metai: 2025, keliamoji galia: 2 000 kg, Protec KT 2000 HV, hydraulically height-adjustable Load capacity: 2,000 kg Handheld remote control with digital display Dual foot pedal control Height approx. min. 800 mm tilted to center, max. height 1,400 mm Min. height horizontal: 1,000 mm Faceplate diameter: 1,200 mm Minimum tilt angle: 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW Isdpfx Afsncfvho Ieal

Sąlyga: naujas, Gamybos metai: 2023, Highly efficient series production Clamping – Enter cutting size – Start. Automatic saws with loading systems are a standard for efficient series processing of bar and bundle material. Maximum cutting range up to 290 x 320 mm. Features - Automatic hydraulic sawing machine with NC control - For cuts from 0° to 60° right, compliant with all CE safety standards - The machine features 9 programs, each consisting of up to 99 individual steps, totaling approximately 890 cutting positions, with a corresponding piece counter - Functions: Material feed, closing of the fixed vice, blade rotation, distribution of emulsifiable coolant, bow descent until the end of the cut, return of the feed carriage to the set position, bow reset, and blade rotation stop via coolant distribution, cycle repetition Iasdpfofww Sqsx Af Iel - Hydraulic feed, cut by cut, with no longitudinal dimension limit - Numerical control of quantity and cut length - Hydraulic control panel with adjustable cutting pressure - Blade tension is monitored electromechanically via microswitch - Device with brush for band cleaning - Bimetallic band 3200 x 27 x 0.9 mm - Cutting thickness 1.2 mm - Material feed stroke: 600 mm - Hydraulic power unit motor: 0.75 kW - Electric pump: 0.09 kW for blade cooling You are welcome to inspect the system at any time in our production/demo hall. Please feel free to contact us regarding this. Plantec Maschinen GmbH

Gamybos metai: 2002, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam - 75°: 1008x402mm - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm Ijdpshzbipjfx Af Ieal RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Complete robotic welding cell with turntable and enclosure Robot: KUKA KR 150 R2700 extra Payload: 150 kg Reach: 2,090 mm Includes welding gun (Dalex, new in 2018) with cooling system (closed-loop water cooling) A complete second welding gun (brand: ARO) is also included Dedicated cooling unit integrated within the system Automatic turntable with 10-position indexing (currently configured for 5 positions for the ongoing product) Workstation for loading and unloading parts is well-lit and secured with light curtains Iaodpjnr E Enefx Af Iol The entire system is controlled via Siemens PLC, programmed by HS Automation Siemens operator panel for system operation mounted at the loading station on a swivel arm All components are housed within an enclosure with a safety door The system can still be inspected in operation.