Pjūklo ir gręžimo įrenginys

Kaltenbach KBS1010-KDX-S1015

Gamybos metai: 2004, būklė: paruoštas naudoti (naudotas), A fully automatic band saw system from Kasto is available. Cutting range at 90°: round material: 530 mm, square material: 530 mm x 530 mm, flat material: 530 mm x 640 mm. Saw blade length: 7,675 mm, blade width: 54 mm, blade thickness: 1.6 mm, cutting speed: 120 m/min. Overall system dimensions (X/Y): approx. 18,000 mm / 4,000 mm, weight: approx. 6,000 kg. Inclusive of roller conveyors. Documentation available. On-site inspection possible. Gsdpfev S E Edsx Ac Dsbk

Gamybos metai: 2002, būklė: naudotas, Diameter: 180 mm Workpiece length: 0 mm Workpiece width: 1350 mm Total power requirement: 65 kW Machine weight approx.: 7,500 kg Space requirement approx.: [to be completed] m T I M E S A V E R S (Netherlands) Wide-belt deburring and finishing grinding machine Model: 41 Series 1350 WRDOW-N Year of manufacture: 2002 Serial No.: 2313-03 --- Grinding width approx.: 1,350 mm Maximum workpiece height approx.: 1–50 mm Feed speed, stepless: approx. 1–10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the center of the belt; belt feed motor approx. 3 kW, frequency-controlled for stepless feed 1–10 m/min; tip switch for belt forward/reverse operation; digital display for belt speed and stepless table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11–22 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 3.) Vertical grinding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nylon fleece available in different grades, especially for deburring and cleaning surfaces and for edge rounding of workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 5.) Wet processing version = complete coolant system, consisting of band filter unit with pump integrated in the machine base, rotary union at the top of the deburring disc spindle, water return through the vacuum table, as well as water mist separator mounted above the machine with blower approx. 5.3 kW. Side doors made of stainless steel sheet. Oil skimmer, etc. 6.) Side-mounted control panel with user-friendly controls and digital position and speed display. Joystick for feed belt and table adjustment, 3x ammeters, etc., as well as workpiece pressure rollers at front and rear, emergency stop. Total drive approx.: 65 kW – 400 V – 50 Hz Weight: approx. 7,500 kg Required room height: approx. 3.50 m Condition: good – powered, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice Gbsdpfx Ajt Hw Shsc Dsk

Gamybos metai: 2007, būklė: paruoštas naudoti (naudotas), Siūloma CNC profilių gręžimo staklė Voortman su judančia gręžimo kabina. Darbo aukščio intervalas: 30 mm-1050 mm, pozicionavimo greitis: 40 m/min, stalo plotis: 300 mm, maks. darbo plotis: 1800 mm, atramos gylis: 1500 mm, įrankių vietų: 5, maks. eigos greitis: 40 m/min, įrankio laikiklis: SK40, gręžimo diametras: 5 mm-40 mm, sriegimo intervalas: M6-M30, darbinis ilgis: 16200 mm. Yra dokumentacija. Galima apžiūrėti vietoje. Gjdpfxsxp Rb Ie Ac Debk

Būklė: naujas, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Cutting capacity at 45 degrees: round 550 mm Cutting capacity at 45 degrees: square 550 mm Cutting capacity at 45 degrees: flat 550 x 600 mm Cutting capacity at 60 degrees: round 370 mm Cutting capacity at 60 degrees: square 370 mm Gbodpfx Aefg E Hmsc Djk Cutting capacity at 60 degrees: flat 370 x 600 / 450 mm Saw blade length: 7260 x 41 x 1.3 mm Blade speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.8 t Space requirement: approx. 5.85 x 3.7 x 2.7 m 2-column double mitre bandsaw for fast cutting, equipped with pusher system P15. Option: P30. Hydraulic saw frame lowering: • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system." An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor, combined with a reliable hydraulic brake via large-radial central positioning. The worktable runs on high-quality preloaded bearings, ensuring exceptionally smooth rotation. CNC control: A CNC controller allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitres. Double-sided gripping positioning system: The B&S pusher, feed, and positioning system is equipped with "double-sided opening grippers" which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal form. The pusher system is built as a separate unit and runs on ball-bearing linear guides, precision ground rack, and is driven by a frequency-controlled, robust gear motor.

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: SH-250, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 250 t, eigos ilgis: 450 mm, darbinis greitis: 4 mm/s, atbulinės eigos greitis: 8 mm/s, bendras ilgis: 3 000 mm, bendras plotis: 2 000 mm, bendras aukštis: 1 700 mm, Įranga: dokumentacija / vadovas, MODEL: SH-250 STANDARD DESCRIPTION: Our SH series horizontal ram hydraulic press is designed with a range of three different capacities from 100 to 250 tonnes. The horizontal hydraulic presses are specifically engineered for straightening and bending work on profiles, bars, and beams. The horizontal design of the machine allows easy handling of large beams and profiles. The latest generation HS series horizontal hydraulic press has evolved to provide versatile functionality, such as the possibility to fit a wide variety of tooling. They operate with a hydraulic pressure of less than 350 BAR to ensure maximum longevity of the entire hydraulic system. STRUCTURE AND TABLES The SH series horizontal straightening hydraulic presses feature a C-frame structure, fully welded and manufactured exclusively from S355JR steel. The frame is stabilized and machined after welding to ensure perfect parallelism and precision. All calculations and designs are made using finite element software. This allows us to consistently guarantee our high standards of robustness, precision, and quality. The presses are equipped with an anti-rotation main push cylinder and a rear support table, both made from high-strength steel and machined with DIN 650 T-slots. Standard equipment also includes support blocks made from C45E steel. Two height-adjustable side support rollers are supplied as standard, one on each side. PAGE 2/4 CYLINDER AND HYDRAULIC UNIT Double-acting cylinder with honed tube, chromed piston rod, and maintenance-free wear guides. Cylinder operated by a lever-controlled hydraulic distributor. It features a removable block to prevent piston wear. Single-speed motorized hydraulic unit. ELECTRICAL INSTALLATION AND SAFETY Electrical installation includes a motor protection switch and emergency stop. Supplied with a glycerine manometer with tonnage reading and hydraulic oil. Complies with and meets all essential health and safety requirements according to CE regulations. Supplied with an instruction manual. OPTIONAL ACCESSORIES Gbjdpfx Aewk Hkqjc Dek • Basic feed rails from 3,000 mm up to 12,000 mm with adjustable height. • Motorized feed rails from 3,000 mm up to 12,000 mm. • Hydraulic lifting and tilting of feed rails. • 415 mm long folding unit. PROMECAM clamping system. • Additional single-speed manual pump, allows both manual and motorized operation modes. • Low-voltage electric foot pedal control. • Precision limit switches with cylinder anti-rotation and electric foot pedal control. • Two-speed hydraulic unit. • Custom geometry to suit your requirements.

Būklė: geras (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: ABCM 1250/3, įvesties srovės tipas: trifazis, Gas profile cutting machine for I-beams. Gbodpfx Ajrbif Toc Dok Manufacturer: Peddinghaus, Germany; Model: ABCM 1250/3; Control system: Fagor; The machine is connected and fully operational.

Būklė: naudotas, Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, HD-X 918 – HBP 410/923G kompleten, najsodobnejši CNC-krmiljen sistem za učinkovito in hitro obdelavo s svedranjem in žaganjem skoraj vseh vrst konstrukcijskih profilov in ploščatih palic. Gjdpjw Hf T Nefx Ac Dsbk

Būklė: naudotas, Gamybos metai: 2006, Webhöhe min. 80 mm, max. 1220 mm. Flanschhöhe min. 42 mm, max. 600 mm. U-Profile min. 80 mm, max. 1200 mm Flanschhöhe min. 45 mm, max. 300 mm. Winkelprofile min. 80 x 80 x 8 mm, max. 300 x 300 x 50 mm Flachstahl min. 100 mm, max. 1220 mm Quadratrohre min. 80 x 80 mm, max. 600 x 600 mm Rechteckrohre min. 80 x 40 mm, max. 1200 x 600 mm Maximales Positioniergewicht: 15.000 kg Maximales Liniengewicht des zu bearbeitenden Profils: 750 kg/m Max. Verfahrgeschwindigkeit: 30 m/min Anzahl Bohrspindeln: 3 - Zwei horizontale Bohraggregate mit einzelnem Spindel - Ein vertikales Bohraggregat mit einzelner Spindel Maximaler Bohrdurchmesser: 50 mm - mit Morsekegel Nr. 4 Maximale Bohrstärke: 75 mm Motorleistung pro Spindel (Wechselstrom): 15 kW Spindeldrehzahl (stufenlos programmierbar): 180–3000 U/min Positionierweg zur Anpassung an die Teilungslinie: - Vertikale Bohrspindel: 20–1200 mm - Horizontale Bohrspindeln: 10–600 mm WERKZEUGWECHSEL - Anzahl Werkzeugwechsler: 3 - Anzahl wechselbarer Werkzeuge: 6 - Werkzeugaufnahme ISO 45 Modell 1260 BH für Profile-Kaltsägeschnitte: - Sägeleistung 90°: min. 80 x 10 mm - Sägeleistung 90°: max. 1250 x 600 mm - Sägeleistung 45°: max. 800 x 600 mm - Sägeleistung 60°: max. 500 x 500 mm Gbodpfx Acsx N Icls Dok - Sägebandantrieb 11 kW - Schnittgeschwindigkeit: 20–100 m/min - Sägebandabmessung: 67 x 1,6

Būklė: naudotas, Gamybos metai: 1985, Offer 25995 Technical specifications: - Pressing force 1600 kN / 160 t - Pressure control range 0 – 160 t - Stroke length approx. 0 – 600 mm - Max. installation depth with straightening beam 1050 mm - Max. installation depth without straightening beam 1400 mm - Stroke speed approx. 0 – 0.6 m/min - Tool height approx. 400 mm - Drive system 380 V / 11 kW - Required space approx. W 3600 x H 1400 x D 1800 mm - Weight approx. 6500 kg - Accessories - Height-adjustable lateral support rollers Gbjdpowp Eguofx Ac Dok - Straightening tool for long material - Straightening beam 1300 x 400 mm with - Side-adjustable counter bearing via threaded spindle

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, tuščias svoris: 6 000 kg, aušinimo siurblio galia: 180 W, juostinio pjūklo ilgas: 7 600 mm, pjūklo juostos plotis: 50 mm, AMADA HFA 700 CNC – Fully Automatic Heavy-Duty CNC Bandsaw Metalworking | Series Production | AMADA Japan The AMADA HFA 700 CNC is a fully automatic, horizontal CNC bandsaw designed for metalworking, suited for heavy industrial applications and series production. Its robust construction with a machine weight of 6,000 kg and proven AMADA technology ensures stable, precise, and reproducible cutting results. Key Advantages: ● Fully automatic CNC bandsaw for metal ● AMADA – Industrial quality ● Heavy-duty design, machine weight 6,000 kg ● Rigid machine frame to minimize vibrations ● Saw motor 7.5 kW ● Hydraulic blade tensioning ● Industrial saw blade 7,600 × 50 × 1.6 mm ● Modern CNC control with automatic cutting cycles ● Ideal for series and continuous operation ● Suitable for solid material, profiles, and material bundles Technical Data ● Control: CNC ● Saw motor power: 7.5 kW Gedpfxeyc H H Us Ac Dobk ● Hydraulic motor: 2.2 kW ● Coolant pump: 180 W ● Wire brush: 200 W ● Saw blade dimensions: 7,600 × 50 × 1.6 mm ● Blade tensioning: hydraulic ● Power supply: 400 V / 50 Hz ● Connected load: 14 kVA ● Machine weight: approx. 6,000 kg Condition: Used, fully functional, ready for operation 📩 Contact us for pricing and further technical information.