Dyzeliniai krautuvai

Kalmar DCE80-6

Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 3491, Gamybos metai: 2016, keliamoji galia: 9 000 kg, kėlimo aukštis: 2 030 mm, stiebo tipas: dupleksas, šakių laikiklio plotis: 200 mm, šakių ilgis: 1 200 mm, bendras ilgis: 4 370 mm, bendras plotis: 2 000 mm, darbinė masė: 10 820 kg, papildomos įrangos savybės: Front mud guards, Įranga: apšvietimas, Kalmar DCE80-6LB iš Uniktruck Bsdpfxjw H S Eqo Admolr

Sąlyga: naujas, Pre-bending: 6.0 mm Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » at 3x top roll diameter Pre-bending: 6.0 mm » at 1.5x top roll diameter Top roll diameter: 230 mm Bottom roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital readout for side roll positions • Hydraulic drop-end bearing • Device for conical bending • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torque shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment comply with CE regulations Bsdsd Ab H Hspfx Admolr Catalog available at the following link: Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be a maximum of 30% or more than 60% of the roll length • Hardened rolls are recommended

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, kėlimo aukštis: 4 450 mm, kuro tipas: dyzelinas, stiebo tipas: dupleksas, Pagaminimo metai: 2009 Kėlimo galia: 8 000 kg Statybinis aukštis: 344 cm CE žymėjimas: taip Techninė būklė: labai gera Išvaizdos būklė: labai gera Dėl papildomos informacijos kreipkitės į Mergimą Bricori. Bljdpsxpgcnjfx Admer

Sąlyga: naujas, Dimensions (LxWxH): 3,600 x 1,120 x 1,020 mm Approx. weight: 2,400 kg Total power requirement: 4 kW Bending capacity: 5 mm Sheet thickness: 6 mm Sheet length: 2,030 mm Technical Data Roll diameter: 170 mm Equipment • 3 rolls • Asymmetrical roll arrangement – with pre-bending • Top roll swivels forward Bodped Ab Haefx Admolr • Motorized right-left control • Conical bending by tilting the rear roll • Operation via foot pedal • Hardened rolls • Digital display Catalogue available at the following link:

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: B11400640, Gamybos metai: 2017, veikimo valandos: 13 000 h, keliamoji galia: 42 000 kg, kėlimo aukštis: 15 100 mm, kuro tipas: dyzelinas, stiebo tipas: teleskopinis, statybinis aukštis: 4 600 mm, galia: 256 kW (348,06 AG), tuščias svoris: 66 600 kg, pavaros tipas: Diesel, Full-container reach stacker Chassis number: B11400640 Mast type: Telescopic Transmission: ZF5WG261 Condition: Operational and fully functional Technical condition: Good Front tires type: Pneumatic Front tires size: 18.00-25 Front tires condition: 20 - 40% Rear tires type: Pneumatic Rear tires size: 18.00-25 Rear tires condition: 0 - 20% Description: Good running and working condition. Side shift, Full cabin, air conditioning, Central lubrication, camera, 30´auto stop, air conditioning. Bedpfx Asuh A Ebedmjlr

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, keliamoji galia: 18 000 kg, kėlimo aukštis: 4 000 mm, laisvas kėlimas: 2 000 mm, kuro tipas: dyzelinas, stiebo tipas: dupleksas, statybinis aukštis: 3 695 mm, galia: 168 kW (228,42 AG), šakių laikiklio plotis: 2 500 mm, šakių ilgis: 2 400 mm, pavaros tipas: Diesel, Heavy Duty Forklift – Diesel Load center: 600 mm Fork width: 200 mm Fork thickness: 100 mm Mast type: Duplex Transmission: ZF 3WG171 Condition: New unit Technical condition: New Front tires type: Pneumatic Front tires size: 12.00 x 20 Rear tires type: Pneumatic Rear tires size: 12.00 x 20 Description: Sideshift, Fork positioner, KALMAR SV/GV – fork carriage with central leveling, width B = 2500 mm Terminal West quick-change system for SV/GV fork carriage Additional hydraulic function incl. hoses Kalmar EGO comfort cabin ECC air conditioning with fresh air filter, tinted windows and air-suspended, leather-reinforced Grammer Actimo XL driver’s seat Radio with DAB+/CD/RDS/MP3/USB/AUX/Bluetooth/hands-free/streaming 12/24V power inverter incl. 2 x 12V and 2 x 24V sockets Blsdpfx Ajuahtbjdmjr Load weight display on screen Direction selector switch on lift hydraulics lever 220 V engine pre-heater Accumulator for lift hydraulics Hydraulic oil cooler with fan Mast tilt 14° forward and 10° backward Adjustable LED beacon Kalmar fork tines Fork length, l = 2,400 x 200 x 100 mm Raised air intake with pre-separator Mudguards on drive axle, mudguards on steering axle Anti-slip coating on front wheel arches and tank 2 extra LED work lights on mast below standard headlights 2 extra LED work lights on front cab corners facing forward 6 extra LED work lights on rear cab corners with guard Blue Spot front & rear Automatic central lubrication on steering axle and fork carriage Sensor-controlled Forrex fire suppression system – automatic & manual activation 6 kg (powder) fire extinguisher, EN3 Rear view camera mounted on cab roof with in-cab color monitor Mast camera – connected to in-cab monitor (in combination with rear view camera) Tire pressure monitoring

Sąlyga: naujas, 50 running metres Jungheinrich MPB pallet racking, new New goods, see pictures Height: 9 m Depth: 110 cm, blue Beam length: 2.7 m, yellow Beam load capacity per level: 3,000 kg Asking price: €12,750 net ex stock Offer includes: + 19 pre-assembled frames, depth 110 cm, height 9 m + 144 beams, length 2.7 m, 3,000 kg load per level + 288 safety clips + 78 concrete anchors Load capacity signs and documents included as standard. Further accessories available in our accessories catalogue. Frames painted blue, cross-bracing galvanized. Heights from 3.5 m to 9 m in stock. Bay load capacity 12 tonnes. Beams yellow. Goods in stock. Transport and assembly available on request. Inspection possible at any time by appointment. Further information available on request. Bsdpfxolp Ntge Admolr At all times, over 5,000 linear metres of pallet racking from various manufacturers in stock. (Subject to change and errors in technical details, specifications and prices, as well as prior sale! Please see our T&Cs. All prices excl. VAT, ex stock.) Purchase / Sale We are constantly looking for and offering numerous items from various fields – Clean company clearances – Business liquidations – Fast – flexible – solution-oriented! We also clear out and/or dispose of for insolvency administrators. Send us a short message, we will reply immediately. To access our page, please click on our logo!

Sąlyga: naujas, Pre-bending: 10.0 mm Sheet length: 2550 mm Sheet thickness: 13.0 mm Total power requirement: 15.0 kW Approx. weight: 10.6 t Dimensions (LxWxH): 4.76 x 1.66 x 1.59 m Image similar to actual product Bending capacity: 13.0 mm » at 3x top roller diameter Pre-bending: 10.0 mm » at 1.5x top roller diameter Top roller diameter: 270 mm Lower roller diameter: 250 mm Side roller diameter: 220 mm Bedpfx Adod Ab H Iomelr Max. opening: 50 mm Working height: 1,155 mm • Fully hydraulic drive of top and bottom rollers via planetary gearbox • Digital display for side roller positions • Hydraulic drop-end bearing • Infinitely variable rolling speed • Conical bending device • Hardened rollers • Hydraulic adjustment of side rollers, synchronized via PLC • Hydraulic adjustment of lower roller via torsion shaft • Pressure-adjustable lower roller • Electrical and hydraulic overload protection • Mobile control console • Machine and equipment comply with CE regulations See catalog at the following link:       Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be max. 30% or more than 60% of the roller length • Hardened rollers are recommended

Sąlyga: naudotas, mašinos/transporto priemonės numeris: MAN00000E01086979, Gamybos metai: 2022, veikimo valandos: 670 h, kėlimo aukštis: 3 700 mm, kuro tipas: dyzelinas, galia: 37 kW (50,31 AG), variklių gamintojas: Kubota, pavaros tipas: hidrostatinis, Kėlimo galia: 2 500 kg Bledjtvlqmepfx Admer Statybos aukštis: 209 cm Priekinės padangos būklė: 0 Galinės padangos būklė: 0 Transportavimo matmenys (I x P x A): 4,19x1,45x2,08 m Dėl išsamesnės informacijos kreipkitės į PFEIFER GROUP.

Sąlyga: geras (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, Industrial steam boiler Brand: Loos Bosch Group Model: U-ND 800 Bodpfx Ajv I E Tgodmjlr Serial number: 109582 Year of manufacture: 10/2011 Total capacity: 1,108 liters Steam output: 800 kg per hour, equipped with Weishaupt GmbH burner Burner type: WM-L10/3-A Year of manufacture: 2011 Minimum output: 250 kW Maximum output: 800 kW Steam boiler dimensions: 2,500 mm x 1,600 mm x 1,900 mm Storage tank by Achenbach GmbH Capacity: 800 liters Dimensions: 1,600 mm x 850 mm x 2,600 mm Control cabinet Dimensions: 1,000 mm x 180 mm x 750 mm Burner fully overhauled in 2024.