šakinis krautuvas

Kalmar DCE 100-6

Būklė: geras (naudotas), mašinos/transporto priemonės numeris: 3443, Gamybos metai: 2008, keliamoji galia: 10 000 kg, kėlimo aukštis: 4 530 mm, stiebo tipas: dupleksas, šakių laikiklio plotis: 200 mm, šakių ilgis: 2 400 mm, bendras ilgis: 4 650 mm, bendras plotis: 2 540 mm, darbinė masė: 15 400 kg, papildomos įrangos savybės: Centralized greasing system, NATO-socket, Dual tread, Įranga: apšvietimas, Kalmar DCE100-6 iš Uniktruck Ratų tipas – varomojo rato: pneumatinis Ratų tipas – vairuojamojo rato: pneumatinis Nsdoyuihxopfx Ahcjwl Ratų dydis – varomojo rato: 12.00-20 Ratų dydis – vairuojamojo rato: 12.00-20

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2015, Didžiausias ruošinio skersmuo: 400 mm Didžiausias ruošinio ilgis: 300 mm Didžiausias griebtuvo skersmuo: 500 mm Didžiausias apsukimo skersmuo: 520 mm Nedpfx Aoxy Ac Sehcswl X ašies eiga: 1 110 mm Z ašies eiga: 595 mm Pagrindinis velenas: galia 40 / 100 % ED 47/34 kW Pagrindinis velenas: sukimo momentas 40 / 100 % ED 600 Nm Pagrindinis velenas: maks. apsukos: 2 850 aps./min. Fanuc 31i Be Y ašies

Būklė: geras (naudotas), mašinos/transporto priemonės numeris: 1379, Gamybos metai: 2008, keliamoji galia: 12 000 kg, kėlimo aukštis: 5 000 mm, stiebo tipas: dupleksas, šakių ilgis: 2 400 mm, bendras ilgis: 4 660 mm, bendras plotis: 2 500 mm, darbinė masė: 17 760 kg, papildomos įrangos savybės: Centralized greasing system, Diesel cabin/engineheater, Kalmar DCE100-6 iš Uniktruck Nodpfx Aeyuhggjhcswl Ratų tipas – varomasis ratas: pneumatinis Ratų tipas – vairuojamasis ratas: pneumatinis Ratų dydis – varomasis ratas: 11.00-20 Ratų dydis – vairuojamasis ratas: 11.00-20

Gamybos metai: 2016, būklė: paruoštas naudoti (naudotas), The Coiltech Decoiler Straightener Feeder System is a compact feed line for presses. Strip width: 600 mm, material thickness: up to 6.5 mm, straightening rolls: 7 x 115 mm, decoiler load capacity: 6,000 kg, inner diameter (min-max): 470–520 mm. Connected load: 7.5 kW; supplied with documentation. Nwjdpfx Aji El Ucjhcol

Būklė: naudotas, 72″ x 0,187″ x 22.680 kg Paxson Loop Längsteilanlage Hersteller: Paxson Materialbreite: 305 mm – 1.830 mm (Abwickler 1.520 mm) Materialstärke: 0,25 mm – 4,75 mm Coilgewicht: 22.680 kg Coil-Innendurchmesser: 508 mm – 610 mm Coil-Außendurchmesser: 1.830 mm Geschwindigkeit: 150 / 300 m/min Richtung: von rechts nach links Materialfestigkeit: 275 MPa Streckgrenze / 345 MPa Scherfestigkeit Material: kaltgewalzt, warmgewalzt, verzinkt Ausstattung: - Einfuhr-Transferwagen - Coil-Autotransportwagen - Mandrel-Abwickler Nedpfx Aoihf Ufjhcewl - Angetriebene Andrückwalze - Hydraulische Spreizung - Verschiebbarer Sockel - Hydraulischer Abziehtable - Angetriebene Vorschubwalzen

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, veikimo valandos: 29 000 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, The INDEX C200 – built in 2009 – is a high-performance CNC production turning center equipped with a FANUC 31i control, main and counter spindle, and a 65 mm bar capacity. The machine features a premium 3-turret design, with turrets 1 and 2 each providing X-, Z-, and Y-axis movement, while turret 3 is dedicated to operations on the counter spindle. All three disc turrets offer 10 stations each, enabling highly flexible complete machining with powered tools at up to 6,000 rpm. Equipped with a parts handling gantry, conveyor, C-axes on both main and counter spindles, and powerful spindle drives, this machine is particularly suitable for productive series manufacturing of complex turned/milled components. Control: FANUC 31i Configuration: Machine with 3 tool carriers / 3 disc turrets Bar capacity: 65 mm Machine bed: vertically arranged cast iron machine bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Output: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: 0.001° resolution Counter spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Output: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: 0.001° resolution Counter spindle Z-axis: 700 mm travel Z-axis rapid traverse: 50 m/min Tool carriers / turrets Three-disc turret configuration, each with 10 stations. Tool system for 10 stations: Cylindrical shank DIN 69880 – Ø30 x 55 mm. Tool carrier 1 X-, Z-, Y-axis 10 stations X-axis: 110 mm Z-axis: 320 / 550 mm as per documentation Y-axis: 100 mm, ±50 mm Powered tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 2 X-, Z-, Y-axis 10 stations X-axis: 110 mm Z-axis: 550 mm Y-axis: 100 mm, ±50 mm Powered tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 3 X-axis 10 stations Used exclusively for machining on the counter spindle X-axis: 180 mm Powered tools: 6.5 kW / 16 Nm / 6,000 rpm Additional technical equipment as per documentation Gantry loader with numerically controlled Z-axis Part discharge from main or counter spindle onto conveyor Remnant removal from main spindle into remnant bin Gantry loader: Traverse speed: 100 m/min Travel range: 70 mm Maximum workpiece diameter: 90 mm Maximum workpiece length: 250 mm Maximum remnant length: 250 mm Maximum workpiece weight: 3.5 kg Nedpfx Aey Tmhzohcewl Hydraulic system: Delivery flow: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Cooling circuit: Delivery flow: 19 l/min Cooling unit capacity: 13 kW Coolant system: Pump flow rate: 80 l/min / 8 bar Tank volume: 300 l Chip conveyor: Chip discharge height: 1,250 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, tekėjimo ilgis: 700 mm, X ašies eiga: 205 mm, Z ašies eigos atstumas: 700 mm, ašies variklio galia: 22 000 W, bendras aukštis: 2 800 mm, bendras ilgis: 6 000 mm, bendras plotis: 3 900 mm, bendras svoris: 9 800 kg, Complete machining with dual spindle, upper and lower turret Kitagawa 3-jaw chuck left and right Tool holders with driven tools, axial and radial Large jaw cabinet with inserts OGL gantry loader with approx. 10 kg payload capacity Chip conveyor Paper band filtration system with pressure tank Maximum turning diameter: 400 mm X-axis travel: 205 mm Z-axis travel: 700 mm Spindle bore: 62 mm Spindle speed: 6000 rpm Spindle motor power: 22 kW Counter spindle speed: 6000 rpm Counter spindle through-hole: 62 mm Counter spindle motor power: 15 kW Tool changer: 16 positions Driven tool speed: 6000 rpm Nwjdpfx Aheyn Em Rscsl Lower turret positions: 16 Driven tool speed: 6000 rpm Driven tool motor power: 7 kW Chip conveyor: yes Tool eye: yes Length: 6000 mm Width: 3900 mm Height: 2800 mm Weight: 9800 kg Please note: The information on this page has been provided by us and, wherever possible, obtained from the manufacturer, to the best of our knowledge and belief. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend verifying all critical details independently.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Forklift Kalmar LMV 9-600 Load capacity 9 t Diesel Nodpfxjvq Im Uj Ahcswl

Būklė: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 06007153/001, bendras aukštis: 6 050 mm, bendras plotis: 3 380 mm, bendras ilgis: 3 074 mm, keliamoji galia vienai sandėliavimo sekcijai: 210 kg, statybinis aukštis: 6 050 mm, įėjimo įtampa: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: 06007153/001 Year of Construction: 2006 Total Load: 2 x 33,550 kg Load per Tray (Medium): 205 kg (evenly distributed) Tray Dimensions: 3050 x 864 mm Number of Trays: 36 units (more or heavier trays available upon request) Dimensions Shuttle W x D x H: 3380 x 3074 x 6050 mm (height of Kardex adjustable to available height) Power Supply: 3/N/PE400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid provided the system has not been sold Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed, more or heavier trays available upon request - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Capacity with 36 trays: approx. 95 m², each tray is approx. 2.64 m² - Electronic volume measurement system in 25 mm increments (grid) - Access opening with sliding doors for personnel and goods protection - Control C2000, with B/W OP2000 display Nedpsxq Tbtjfx Ahcjwl - LED anti-glare lighting above the access point - Use of toothed-belt drive for minimum noise - Use of toothed-belt for fastest order picking - Shelf distance adjustable in 25 mm increments via support profiles, prerequisites for high-density storage - Integrated weight management controls tray weight - Including light pointer Price: On request, inquiries via email only Price: excl. VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in pre-owned paternoster systems from, among others, Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, veikimo valandos: 75 000 h, Funkcionalumas: visiškai funkcionalus, 55 kW kompresorius su integruotu džiovintuvu ir dažnio keitikliu. Labai gera būklė. Po serviso. 3 mėnesių garantija. Nedpfev Rmmmox Ahcewl