Automatinė štampavimo mašina - dviguba kolona

KAISER V 160 WR

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, slėgis: 16 juosta, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, temperatūra: 400 °C, įėjimo įtampa: 6 000 V, sukimosi greitis (min.): 1 500 aps./min, sukimosi greitis (maks.): 1 500 aps./min, aušinimo tipas: oras, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed and never commissioned, still covered by manufacturer’s warranty. Following a revision of the long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator, complete as per original OEM supply, is now available for sale. The unit is NEW, manufactured and fully tested at OEM level, but never installed or put into service. It is still covered by the manufacturer’s warranty and is stored in a controlled indoor environment. Immediate availability allows you to bypass the usual production lead times, which for this kind of equipment are typically 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual casing turbine (Steam Part A + Steam Part B) - 3-shaft integrated gearbox (2 pinions + central gear) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - 3-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless execution, prepared for parallel grid operation Systems included: - Integrated oil system in base frame - Main mechanical oil pump and auxiliary electric oil pump - Local control panel on skid - Control and protection panel equipped with Siemens SIPROTEC 5 - Electronic speed and pressure governor - Independent overspeed protection device - Turbogenerator simulation model ENC-RfG Typical applications: - Industrial cogeneration plants - Process steam energy recovery - Biomass and waste-to-energy plants Kdedpjyidvdefx An Uot - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Possibility of installation and commissioning with manufacturer support Possible fields of application: - Biomass and waste-to-energy plants, for production of electricity and process steam, with immediate unit availability — no multi-year production lead times - Industrial cogeneration (CHP) in plants with continuous process steam usage (paper, food, chemical, and manufacturing industries) - Revamping/repowering of existing plants, as a fast-track alternative to new OEM supplies with 24–36 month delivery times Price: Upon request. Further technical information and documentation available upon request.

Gamybos metai: 1981, būklė: labai geros būklės (naudotas), Diametras griebtuvui: 1300 mm Kedpfx Ajk Dz N Ion Uedt Didžiausias tekinimo skersmuo: 1100 mm Tekinimo skersmens diapazonas: 460–1250 mm

Būklė: naudotas, Gamybos metai: 1987, Technical details: Number of spindles: 8 Spindle passage: 51 mm Item: Multi-spindle automatic lathe Manufacturer: Schütte Model: AF51 Year of manufacture: 1987 Six-spindle automatic lathe 8 main spindles Max. nominal passage D=51mm Control: SIEMENS SIMATIC S5 Gripper in position 7 for rear-side machining Thread cutting drive Independent feed in positions 2/3 Electronic cam switch Balluff Plain text display Wöhrle Coolant auxiliary pump Magnetic cartridge filter Oil operation Including loading magazine IEMCA PRA40/37/F, year 1987 (bundle loader) Ksdsiay Sfepfx An Ujdt Painted in light blue and light grey Tool configuration may differ from the illustrations. Please contact us for more information and photos via email (at) or *

Būklė: naudotas, TECHNICAL DATA - Max. capacity: 40 [t] - Max. workpiece diameter: 40 [mm] - Spindle diameter: 80 [mm] - Spindle length: 120 [mm] - Max. tool diameter: 250 [mm] - Dimensions: 2400 x 2100 x 2200 [mm] - Weight: 7100 [kg] Ksdpfxsuhb Uho An Ujdt EQUIPMENT - CNC control (Siemens-based) - Tailstock device - Coolant tank with pump - 2 boring wheels 80, diameter: 260 [mm]

Būklė: naudotas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 mm - Max. machining length: 200 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1° SUB SPINDLE Kjdpfeuha Ugsx An Uodt - Max. bar diameter: 20 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° - Number of tool holders: 2 TOOL HOLDER 1 - Number of stations: 5 TOOL HOLDER 2 - Number of stations: 5 - Number of driven stations: 4 - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 6,000 rpm SUB OPERATIONS - Number of stations: 7 - Number of driven stations: 3 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 14 kW DIMENSIONS AND WEIGHT - Required floor space: 2,270 x 1,650 mm - Machine height: 2,200 mm - Machine weight: 3,500 kg OPERATING HOURS - Operating hours: 80,490 hrs ACCESSORIES - Control system: Fanuc - Driven tools powered at: S2, S3, S5, S6 - Driven guide bush - Part removal unit - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: ROBOBAR SBF 532 - Oil mist extractor - Coolant reservoir

Būklė: geras (naudotas), Gamybos metai: 2010, Horlemann HR10U-S Switchgear 12 kV HR 10U – the universal switchgear for industry and utilities Modular medium-voltage switchgear for the distribution of solar power Switchgear: Manufacturer: Horlemann Configuration: KKÜHTTT Type: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short-circuit withstand: 20 kA/1s Height: 2060 mm Width: 1300 mm Depth: 800 mm Cell width: 7 x 650 mm Busbar: AL 50 x 10 mm Ksdpjnfu Dysfx An Ujdt Weight: approx. 620 kg HR10U Rated Data: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Ud: 28 kV Ip: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1s) IP: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC Cast Resin Transformer: Design: Cast resin Primary voltage: 10 kV Secondary voltage: 400–230 V Configuration: Dyn5 Year of manufacture: 2010 Height: 1740 mm Width: 1300 mm Depth: 900 mm Weight: 1.8 t The switchgear features pressure relief via a pressure relief chamber located in the lower section of the switch panel. Documentation: Test report Wiring diagram Financing through our bank is also possible. komplett-konzept.leasingo.de You will find more new and used items in our shop! International shipping costs on request!

Būklė: geras (naudotas), Gamybos metai: 2008, Naudotas 6 metrų CNC lankstymo presas iš Amada Tipas: HFE 400 6 L Galia: 6100 x 400 t Eiga: 350 mm Kdsdpoy T Hltjfx An Ujt Y1, Y2, X1, X2, R1, R2, Z1 ir Z2 valdomi CNC 9204 darbo valandos Svoris: 36 tonos Transportavimas 2 dalyse (pagrindinė dalis + atskirai apatinis stalas) Automatinė bombiravimo sistema apatiniame stale 450 mm sumontuota į grindų pamatą Išmontavimas ir pakrovimas įskaičiuoti

Būklė: naudotas, Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 800 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 2 000 mm, stalo apkrova: 5 000 kg, ašies skersmuo: 110 mm, bendras aukštis: 3 800 mm, bendras ilgis: 5 000 mm, bendras plotis: 3 000 mm, stalo ilgis: 1 520 mm, stalo plotis: 1 225 mm, padavimo ilgis X ašis: 1 800 mm, padavimo eiga Y ašimi: 1 500 mm, padavimo ilgis Z ašis: 2 000 mm, Įrankio laikiklis SK50, Heidenhain valdymas, staklės paruoštos atsiėmimui ir iškart naudojimui. Kdedpfexga Tnjx An Uot

Būklė: naujas, Gamybos metai: 2026, -Tfon Leveltech® S-3513 lyginimo staklės. -Tfon Leveltech® S-3513 yra preciziškos lyginimo staklės, optimizuotos itin plonoms medžiagoms, kurios sujungia pažangią elektromehaninę kontrolę su lengvu valdymu, užtikrindamos nuoseklius, aukštos kokybės lyginimo rezultatus. -Pagrindinės techninės specifikacijos: Medžiagos storis: 0 – 0,3 mm. Didžiausias medžiagos plotis: 1.300 mm Kdsdskyrzljpfx An Uot Mažiausias medžiagos ilgis: 70 mm Tiesinimo volelių greito keitimo sistema: Standartinė. Lyginimo tarpo reguliavimas: Elektromehaninis / PC valdymas. Staklių matmenys (I × P × A): 2.685 × 1.585 × 1.820 mm. Bendras svoris: 5.000 kg.

Gamybos metai: 2016, būklė: paruoštas naudoti (naudotas), The Coiltech Decoiler Straightener Feeder System is a compact feed line for presses. Strip width: 600 mm, material thickness: up to 6.5 mm, straightening rolls: 7 x 115 mm, decoiler load capacity: 6,000 kg, inner diameter (min-max): 470–520 mm. Connected load: 7.5 kW; supplied with documentation. Kjdpfoi El Ucsx An Ujdt