Suslėgto oro šaldymo džiovintuvas

Kaeser TE 121

Būklė: geras (naudotas), Gamybos metai: 1999, Suspausto oro džiovintuvas Darbinis slėgis: 13–18 bar Lhjdpfx Aog Nk Abem Hef Srauto našumas prie 7 bar: 12,7 m³/min Įtampa: 400 V Svoris: 660 kg Bendri matmenys: 1050 x 1550 x 1500 mm

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, įvairūs elektros varikliai sandėlyje skirtingi žinomi Vokietijos gamintojai nuo 1 iki 160 kW visi elektros varikliai patikrinti dėl funkcionalumo Lhedpjx Nh S Tofx Am Hof

Būklė: geras (naudotas), Gamybos metai: 2020, veikimo valandos: 1 730 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 580 kg, bendras ilgis: 1 335 mm, bendras plotis: 750 mm, bendras aukštis: 1 880 mm, slėgis (maks.): 11 juosta, aplinkos temperatūra (min.): 3 °C, aplinkos temperatūra (maks.): 45 °C, triukšmo lygis: 66 dB, apsaugos tipas (IP kodas): IP55, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, šaldymo sausintuvas, Kaeser Aircenter SK22 Screw Compressor (2020) Manufacturer: Kaeser Model: Aircenter SK22 Year of manufacture: 2020 Condition: Very good, used Operating hours: 6,000 h Load hours: 1,730 h Next service in: 2,589 h Technical Data Pressure: 11 bar Effective free air delivery: 1.67 m³/min Drive motor rated power: 11 kW Drive motor protection rating: IP 55 Electrical supply: 400 V / 3 Ph / 50 Hz Dimensions (W x D x H): 750 x 1335 x 1880 mm Weight: 580 kg Compressed air receiver: 350 l Compressed air connection: G 1 Sound pressure level: 66 dB(A) Refrigeration dryer Power consumption: 0.49 kW Lhjdpfx Aexnnd Dom Hef Pressure dew point: 3°C Pressure drop: 0.06 bar Refrigerant: R 513a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment per EN 60204-1: Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5 m power supply cable with 32A plug

Būklė: geras (naudotas), Gesamtmaße: 3300 x 2600 x 2450 mm; Kesselinhalt: 330 l; Stromversorgung: 400 V, 50 Hz; Gesamtleistung: 115 kW / 150 A; Messergeschwindigkeiten: 550 / 975 / 1950 / 2500 / 3200 / 4100 U/min; Hauptantrieb: 103 kW Gleichstrommotor; Kesselgeschwindigkeiten: 4 / 8 / 12 / 16 U/min; Kesselantrieb: 1,2 kW; Lhjdpfx Amsl Dmpae Hef Mischgeschwindigkeiten: -65 / -130 U/min mit Umkehrfunktion; Hydraulikanlage: 5,5 kW; Ladegerät; Entlader; Vakuumpumpe Busch 250 m³/h, 5,5 kW; Gewicht: 5600 kg.

Būklė: naudotas, Gamybos metai: 2000, veikimo valandos: 144 381 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 2 000 kN, For sale is an injection molding machine from Arburg, model 520 C 2000-675. Technical data: Year of manufacture: 2000 Clamping force: 2,000 kN Operating hours: 144,381 Lhedsu Uuakepfx Am Hsf Pump motor power: 30 kW Transport and loading can be organized Europe-wide on request, subject to an additional charge. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your equipment? For more information or to get in touch, please visit our website.

Būklė: geras (naudotas), Gamybos metai: 2010, veikimo valandos: 100 000 h, slėgis (min.): 10 juosta, slėgis (maks.): 10 juosta, aušinimo tipas: vanduo, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, šaldymo sausintuvas, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally pre-piped and pre-wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Intake pressure 1 bar Intake temperature 20°C Relative humidity 0% Usable flow rate at the outlet of the compact unit at operating overpressure of 9.75 bar: 49.4 l/s (2.96 m³/min) according to ISO 1217-3, C Motor rated power: 18 kW Lhodpfju Rptyox Am Hsf Motor rated speed: 4867 rpm Shaft power requirement at maximum operating pressure: 24 kW Shaft power requirement in idle mode: 5.6 kW Compressed air temperature after dryer: 23°C Cooling air volume: 0.23 m³/s Oil capacity: 12.2 l Residual oil content under reference conditions

Gamybos metai: 2013, būklė: paruoštas naudoti (naudotas), Connected load: 4 kW, Weight: 1 t. Ljdpfx Ajhlp Efom Hjhf

Būklė: geras (naudotas), Gamybos metai: 1994, veikimo valandos: 14 000 h, * Dyzelinis autokrautuvas * 14 000 darbo valandų Lhodpfx Amjw Hydps Hof * Keliamoji galia 16 000 kg * Volvo variklis * Kėlimo stiebas, kėlimo aukštis 5 000 mm * Konstrukcijos aukštis 4 100 mm * Šakių reguliavimo įtaisas * Nuosavas svoris 25 000 kg * Paruoštas darbui iš karto

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Ledpfx Amofz U S Eo Hehf Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: Oro kondicionierius, vėsinimo galia: 56 kW (76,14 AG), aušinimo tipas: vanduo, įėjimo dažnis: 50 Hz, šildymo galia: 67 kW (91,09 AG), kuro tipas: dujos, "SANYO" PANASONIC ECO G gas heat pump air conditioning unit Model: SGP-E190J2GU2W Nissan FY5 engine Power supply: 230 V AC, 1 phase, 50 Hz Maximum electrical power: 1.16 kW, 5.4 A (continuous operation) Device protection: IP24 Ledpfx Ajd Tiu Esm Hehf Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS) (cooling): 43.5 kW Heat input (HS) (heating): 46 kW Refrigerant: R407C, 17 kg Design pressure, high-pressure side: 30 bar Design pressure, low-pressure side: 16 bar FOR OUTDOOR USE ONLY! We have 4 units in stock!