Aušintuvas, vandens aušintuvas, aušintuvas

Kühlmaschinen, MTA S.p.A TAEevo Tech 121 P3-20 – 35 kW

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 – RC300 Robot TECHNICAL DATA: Injection Unit: Screw diameter: 135 mm Screw stroke: 610 mm Injection volume: 8,731 cm³ Shot weight (PS): 7,860 g Screw rotation speed: 125 rpm Screw torque: 14,000 Nm Max. screw torque (at reduced speed): 15,630 Nm Plasticising capacity (3-zone screw): 222.9 g/s Plasticising capacity (barrier screw): 279.2 g/s Injection performance: 1,904 cm³/s Regenerative injection pressure: 1,648 bar Max pressure: 2,000 bar Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN Barrel L/D ratio: 25 Number of heating zones (including nozzle): 8 Heating power: 88.5 kW Clamping Unit: Clamping force: 20,000 kN Minimum clamping force: 2,000 kN Opening force with cushion: 1,600 kN Opening stroke: 3,000 mm Max. platen distance: 3,800 mm Mould height: 800 – 1,800 mm Tie bar spacing (H x V): 2,000 x 1,600 mm Platen size (H x V): 2,700 x 2,430 mm Max. mould weight (moving/fixed): 2 x 41,330 kg Max. total mould weight: 62,000 kg Dry cycle stroke (Euromap 6): 1,400 mm Dry cycle time (Euromap 6): 5.5 s Ejector Unit: Ejector stroke: 400 mm Ejector force: 385 kN Fedpfjw Aw Taex Ab Sspb Drive and cooling: Installed main motors power: 265 kW Oil tank capacity: 1,600 l Max. oil cooling power (at 25°C): 43.2 kW Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 – RC300 Robot (2022): Z-axis stroke: 4,280 mm X-axis stroke: 1,800 mm Y-axis stroke: 2,600 mm Robot fully integrated with the machine – control via machine panel Machine in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, household appliances, technical parts). Machine is under power, test run possible. AVAILABLE IMMEDIATELY For further information, please contact us – we can provide additional photos, a working video, technical documentation, and arrange a convenient appointment for inspection.

Sąlyga: paruoštas naudoti (naudotas), Format: 0.5–1 L, maximum output capacity: 5,000 cartons/h, equipped with cap applicator and EURO-LINE cartoning machine, on-site inspection possible. Fpjdporviq Hjfx Ab Sjb

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 4341, bendras svoris: 285 kg, Riveting Press Brand: Agme Model: RR-14 Manufacturing Serial: 7004322 Manufacturing No.: 4341 Year of Manufacture: 2010 Specifications: - Max. diameter at 40 kg/mm²: 14 mm - Adjustable riveting stroke: 5–50 mm - Air pressure: 6 bar - Adjustable riveting time: 0–5 sec - Power supply: 220/380 V, 50/60 Hz - Installed power: 1.2 kW - Control circuit: 24 V DC - Two-hand safety control: Included - Multilingual control interface (4 languages): Included - Piece counter: Included Fpedjrfwy Iepfx Ab Sjb - Weight: 285 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, HAITIAN MARS II MA10000/6800 Universal ServoDrive (2016) Only 17,000 hours in automatic cycle! Main Technical Parameters: Clamping force: 10,000 kN Opening stroke: 1220 mm Minimum mould height: 500 mm Maximum mould height: 1160 mm Daylight between platens: 2380 mm Tie bar spacing: 1160 x 1160 mm Platen size: 1650 x 1700 mm Screw diameter: 90 mm L/D ratio: 24.4 mm/mm Shot volume: 2721 cc Shot weight (PE): 1986 g Injection speed: 544 g/s Max. injection pressure: 2280 bar Machine dimensions: 12.5 x 2.49 x 2.75 m Machine weight: 50,000 kg Equipment and Features: 423 - Proportional valve for injection (Rexroth) S01 - 8x hydraulic core pulls (4x fixed platen, 4x moving platen) with servomotor 432 - 8x core relief 662E - 16x integrated hot runner zones 623 - Acoustic alarm 237C - Clamping force safety sensor 430C - 8x pneumatic cascade controls Cylinder and screw designed for processing 30% glass-filled materials 419A - Parallel movement: opening/ejector or opening/core 667 - 6x freely programmable inputs/outputs Flow meter with 6 pipes + hoses + cable trays + valves + filters + nozzles + operating components, all to Lamky specification (Stäubli quick couplings) Total sockets: 4x230V/16A, 2x400V/16A, 4x400V/32A Locating ring diameter (fixed and moving side): 250 mm 8x pressure gauges for core pull circuits Fsdpfxswtglte Ab Sopb 409A - 8x pneumatic valves (8 mm, 3/2 way; 4x fixed, 4x moving side) E65 - Interface for temperature controllers (4 zones) 236 - Automatic ejector bar retraction (operator side)

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036721, spaudimo jėga: 6 500 kN, varžto skersmuo: 70 mm, tarpas tarp stulpų: 1 110 mm, darbinio tūrio: 1 078 cm³, įpurškimo slėgis: 1 877 juosta, injekcijos svoris: 981 g, atvērimo eiga: 3 200 mm, plokštės aukštis: 1 540 mm, pavaros tipas: Hydraulisch, laisvas tarpatramis: 3 200 mm, įrankio svoris: 2 200 000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you here our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. The sophisticated GuideX sliding shoe perfectly absorbs forces and extends the lifetime of the moulds. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly and highly stable in value. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT colour display with multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Max. mould open force kN 455 - Tie bar spacing (h x v) mm 1110 x 960 - Platen size (h x v) mm 1540 x 1440 - Mould installation height min.-max. mm 1550 (without center platen) - Daylight mm 3200 - Max. opening stroke mm 1650 - Max. mould weight kg 22000 INJECTION UNIT 1 SP2000 Fedow U N Ixepfx Ab Sepb - Screw diameter/type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight max. stroke PS g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticising rate g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter/type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight max. stroke PS g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticising rate g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL SPECIFICATIONS - Connected load kW 341 - Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticising unit - BluePower full insulation for plasticising cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mould heating 96-fold (3.5 kW) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical center platen - Parallel clamping and opening movement during injection process with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface—signal interface for connecting an RPM system - Electrical interface for HRS Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/reject part separation The machine is located at our factory in Parsdorf and is available at short notice. Additional options available upon request. We look forward to your enquiry.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Krauss Maffei KM 1600 – 17200 MX Injection Moulding Machine Year of manufacture: 2016 General Description: Modern injection moulding machine with fully hydraulic clamping system. Equipped with an advanced MC6 control system, based on an industrial computer operating in real-time Ethernet technology. Operation is performed via an integrated 19-inch control panel with a colour touchscreen, LED backlighting, and graphical visualisation of all active processes (ProcessDesigner module). Plasticising Unit: Complete system for processing thermoplastics Screw diameter: 135 mm Version with wear (abrasion) protection Non-return valve Open nozzle Technical Data: Clamping Unit: Clamping force: 16,000 kN Mould opening force: 1,120 kN Platen dimensions (W x H): 2,550 x 2,100 mm Tie bar clearance (W x H): 1,870 x 1,420 mm Opening stroke: 2,700 mm Mould height (min.–max.): 700 – 1,600 mm Max. daylight: 3,400 mm Ejector stroke: 350 mm Ejector force (forward/backward): 300 / 150 kN Injection Unit: Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1,784 bar Shot volume: 9,662 cm³ Shot weight for PE: 6,860 g Screw speed (nominal / max.): 81 / 100 rpm Fpodpfxowyw Npo Ab Seb Electro-hydraulic Equipment: Main motor power: 160 kW Installed heating power: 93 kW Number of barrel heating zones: 7 Number of dry cycles according to EUROMAP 6: 648 / h Oil tank capacity: 2,400 l Dimensions and Weight: Net weight with control cabinet: 92 t Machine dimensions (L x W x H): 14.17 x 4.04 x 2.93 m

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Servo-hydraulic injection moulding machine Clamping force: 9,000 kN (900 tons) 🔹 General Information: Year of manufacture: 2017 Control system: UNILOG B8 Installed power: 53.9 kW Number of operating hours: only 999 Dry cycle time: 4.0 – 770 sec/mm Machine dimensions (L x W x H): 10,100 × 3,400 × 2,700 mm Machine weight: 35,200 kg 🔹 Injection Unit: Screw diameter: 105 mm Fpedpewzy N Uofx Ab Sob Injection volume: 4,545 cm³ Screw rotation speed: 159 rpm Screw L/D ratio: 22 Maximum nozzle stroke / force: 129 mm / 950 kN Maximum nozzle traverse stroke: 525 mm Number of heating zones: 7 🔹 Clamping Unit: Clamping force: 9,000 kN Maximum mould opening stroke: 1,800 mm Minimum / maximum mould height: 600 mm / 1,200 mm Maximum daylight (between platens): 2,400 mm Tie bar spacing (H × V): 1,450 × 1,100 mm Ejector stroke / force: 300 mm / 165 kN Mould opening force: 300 kN Core pulls: 2

Sąlyga: naudotas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: TET802P3-20 - 2200356834, vėsinimo galia: 159 kW (216,18 AG), įvesties srovės tipas: trifazis, aušinimo tipas: vanduo, bendras svoris: 2 192 kg, aplinkos temperatūra (maks.): 46 °C, aplinkos temperatūra (min.): −20 °C, įėjimo įtampa: 400 V, slėgis: 6 juosta, temperatūra: 7 °C, tūrio srautas: 27,1 m³/val, siurblio slėgis: 3,13 juosta, bendras plotis: 1 250 mm, bendras ilgis: 3 535 mm, bendras aukštis: 2 151 mm, garantijos trukmė: 3 mėnesiai, įėjimo dažnis: 50 Hz, Įranga: Tipinė plokštelė prieinama, Process chiller / air-cooled water chiller, Type: TAEevo Tech 802 P3-20 MTA S.p.A. The TAEevo Tech 802 P3-20 is an air-cooled compact water chiller, suitable for outdoor installation (from -20°C to +46°C). Includes crankcase heater, phase monitoring, electronic expansion valves, 678 ltr. buffer tank, integrated P3 circulation pump on the suction side, and winter control (condenser pressure control -20°C). Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity kW: 159 Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 27.1 Available pump pressure (bar): 3.13 Ambient temperature (°C): 32 Refrigerant: R 410A Fjdpfx Ajwltwgjb Sjpb Electrical data: Voltage V: 400, Frequency Hz: 50, Phases: 3, Max. power consumption (kW): 79.48 Max. current (A): 142.2 Starting current (A): 286.2 Protection class: IP54 Dimensions: Length (mm): 3535, Width (mm): 1250, Height (mm): 2151 Weight (kg): 2192 Connection: Rp 3" Serial No.: 2200356834 Year of manufacture: 2020 Condition: Visual grade 2, technically in order (used) Price: on request in Euro (plus VAT, ex works Nettetal) – Used machines may have visual imperfections due to prior use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Sąlyga: naujas, Gamybos metai: 2024, Chillers with capacities from 5 to 600 kW using the natural refrigerant propane R290. Fpedpfx Aoi Ab Hcjb Sjb We can offer various models and configurations, ranging from equipment supply to turnkey installation. Feel free to contact us for a non-binding enquiry or schedule an appointment with our experts, who can assess and develop an on-site feasibility study.

Sąlyga: geras (naudotas), Gamybos metai: 2014, veikimo valandos: 29 646 h, spaudimo jėga: 900 kN, varžto skersmuo: 100 mm, injekcijos svoris: 3 691 g, atvērimo eiga: 1 120 mm, Siūlome puikios būklės HAITIAN MA 9000 liejimo mašiną, idealiai tinkančią didelės apimties plastiko gamybai. Šis įrenginys yra kruopščiai prižiūrėtas ir turi labai mažai darbo valandų ( Fedpjxc U Hzofx Ab Sjpb