Šakinis krautuvas Jungheinrich EFG 430

Jungheinrich EFG 430 GE180-650DZ

Gamybos metai: 2021, Sąlyga: paruoštas naudoti (naudotas), 20 identical welding machines available. Type: cool41 U31, Standard: IEC 60974-1, -2, -10 C.L.A, Mains voltage: 400V, Frequency: 50/60Hz, Protection class: IP23. Power consumption P min: 0.9kW, Cooling performance P max: 0.35MPa (3.5bar), Max. current consumption: 2.5A, Length: 539mm, Width: 210mm, Height: 415mm, Weight: 22kg. Control: Comfort 2.0 with intuitive operation via click-wheel. Seamless adjustment for pulse, spot, and standard modes—especially suited for TIG welding. Adjustable pulse pause ratio (balance), e.g., from 10–90%. Pulse frequencies up to approx. 15kHz in Hz and kHz ranges. ActivArc technology: dynamic arc regulation ensures consistent performance with torch distance fluctuations, prevents electrode sticking, and provides improved root and penetration formation. spotArc/Spotmatic functions for spot welding and tack welding. 2-step/4-step operation possible depending on torch trigger setting. MMA welding (often with automatic MMA pulse) also integrated. Pre- and post-flow gas times adjustable, as well as upslope/downslope times. Torch operating modes via torch trigger (e.g., reduced secondary current, etc.). Memory/JOB storage: recurring welding tasks storable (approx. 8–100 JOBs depending on variant). Energy efficiency: high efficiency, standby function available. Remote control & interfaces: remote control and functional torches connectable, optional LAN/WiFi gateway (ewm Xnet), PC interfaces for parameter setting and monitoring. Machines have seen very little use—a viewing on site is possible. Iaodpfx Aoxdc Upsf Ijl

Sąlyga: geras (naudotas), Gamybos metai: 2001, juostinio pjūklo ilgas: 4 500 mm, bendras aukštis: 2 100 mm, vynų diametras: 600 mm, Cutting height: 300 mm Cutting width: 570 mm Table size: 610 x 700 mm Extraction port: 120 mm Bandsaw guide: upper and lower Fence Overall machine height: approx. 2100 mm Iaedpfjvt Sxgsx Af Ijl

Sąlyga: naujas, Pre-bending: 6.0 mm Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » at 3x top roll diameter Pre-bending: 6.0 mm » at 1.5x top roll diameter Top roll diameter: 230 mm Iedpfod Ab H Hex Af Isal Bottom roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital readout for side roll positions • Hydraulic drop-end bearing • Device for conical bending • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torque shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment comply with CE regulations Catalog available at the following link: Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be a maximum of 30% or more than 60% of the roll length • Hardened rolls are recommended

Sąlyga: naudotas, Gamybos metai: 2023, keliamoji galia: 5 000 kg, kėlimo aukštis: 3 770 mm, bendras ilgis: 5 930 mm, Diesel forklift Iaedpexd El Rofx Af Isl Linde H 50D-01/600 Drive type: diesel Year of manufacture: 2023 Lifting height (mm): 3,770 Load capacity (kg): 5,000

Sąlyga: naujas, Capaciteit, Ø mm ----- 57 x 2 Radius, min/max ----- 20/250 Radiusverschil ----- 50/230 Buigsnelheid/herhaalbaarheid ----- 230º/s. ±0,05° Doornlengte ----- 1.000–∞ Gewicht ----- 5.000 kg Machineafmetingen ----- 3,0 x 1,6 x 1,5 m Buisrotatie ----- 0–360°/sec Lengte-invoer ----- 0–1.800 mm/sec Tolerantiegraad ----- 0,05°/mm Iajdjga T E Aepfx Af Isl Standaardcomponenten voldoen aan VDMA-, ISO- en DIN-normen OPTIES * Online verbinding met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasnaadzoeker en buispositioneerder, elektromagnetische of optische detectie * Vrije radiusbuiging * Simulatie/Botsingscontrole * Verlenging van bedlengte

Sąlyga: naujas, Vollautomatische Inline-Maschine für das stabile und präzise Stapeln von Paletten. Die PSR ist benutzerfreundlich und lässt sich einfach auf verschiedene Palettengrößen einstellen. Die Maschine stapelt Paletten sicher und exakt in Lagen, die bereit zum Verladen oder zur Lagerung sind. Die PSR wird am Ende einer Produktionslinie eingesetzt. Iajdpfjwduv Iox Af Ijl Funktionsweise: Die PSR hebt den Stapel mit zwei Hubarmen an, während ein Kettenförderer eine neue Palette oder ein Deck unter den Stapel befördert. Die Einstellungen für unterschiedliche Palettengrößen lassen sich ganz einfach per Knopfdruck anpassen. Mychrome bietet verschiedene Zusatzmaschinen an, die unkompliziert an bestehende Anlagen angedockt werden können. So lässt sich die Linie beliebig verlängern und weitere Prozessschritte automatisieren. Anpassungen an Design und Größe der Paletten sind auch mit der Zusatztechnik weiterhin möglich. Deck-/Palettenmaße: Min./Max. Länge: 600 mm – 1.600 mm Min./Max. Breite: 600 mm – 1.600 mm Technische Daten: Bedienpersonal | 0 Länge | 3,3 m Breite | 2,5 m (ohne Plattformleiter) Höhe | 2,3 m Leistung | 3 kW, 3x400 V+N Pneumatik | 7 bar, getrocknete Druckluft: 200 l/min Maschinenleistung | 4 Paletten oder Decks/Minute Standardausstattung | Motorisierte Verstellungen

Sąlyga: naujas, Capaciteit, mm ----- 25 x 2 mm Radius, min/max ----- 10/100 mm Radiusverschil ----- 90 mm Buigsnelheid/herhaalbaarheid ----- 500º/s. ±0,05° Buislengte ----- 1.350 ∞ mm Gewicht ----- 2.200 kg Machineafmetingen ----- 3,0 x 1,2 x 1,3 m Buisrotatie ----- 0–850°/sec Lengteaanvoer ----- Standaard 0–2.400 mm/sec Booster ----- 0–1.200 mm/sec Tolerantiegraad ----- 0,05°/mm Draaibeweging van de buigkop ----- 0,75 sec Standaard componenten voldoen aan VDMA-, ISO- en DIN-normen. OPTIES * Online koppeling met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasnaaddetector en buispositioneerder via elektromagnetische of optische detectie * Vrije radiusbuiging * Simulatie/Collision Control Iedpega T Exofx Af Ioal * Verlenging van het bed

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Technical Data: Cone Rolling Machine Iodpfow An Uhjx Af Ioal Working width: 1050 mm Max. bending capacity for mild steel St40: 4.0 mm Diameter of conical top roll: 70 - 185 mm Diameter of side and central lower rolls: 105 mm Conical bending device Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 5.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tons Condition: Very little used, as new condition The seller does not assume liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any guarantee.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 500 h, Funkcionalumas: visiškai funkcionalus, Year of manufacture: 2022, used for only 1 year. High-performance modular pallet block branding machine 6× high-output heating coils, each 2 kW (total 12 kW) – fast heat-up, zero downtime. The PLC touch display allows individual activation of any branding head, which is especially useful for PALLET REPAIR SHOPS. Operating temperature up to 800 °C – reliable marking even on moist wood. Individual intelligent control – each heater is equipped with its own temperature controller, ensuring consistent marking quality. Compact & integrable design – suitable as a standalone station or for seamless integration into existing pallet production lines. Modular construction – in case of failure, production continues; fast servicing by module replacement. Extreme throughput – all pallet blocks branded simultaneously; cycle time < 3 s. Quality components – industrial-grade parts for extended service life. Warranty – 12 months for electronics, 6 months for heating elements. Suitable for: pallet manufacturers, pallet repair shops, and lines requiring fast, uniform marking (e.g. IPPC/brand/logo). Automatic cycle, touch display, easy operation + 2x conveyor rail INCLUDED in the price! Iaodswz Iahjpfx Af Iol Machine trial possible

Sąlyga: naudotas, Gamybos metai: 2017, Vamzdžio skersmuo (maks.): 80 mm, mandrilo ilgis: 4 500 mm, Mandrel Bending Machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii up to 1.5xD → Maximum bending capacity tube 76 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity tube 76 x 2.9 mm (stainless steel) → Total connected load 7 kW → Maximum tube loading length 4.5 m Robust and durable steel construction with a rigid, torsion-resistant connection – no twist-prone components such as a split construction between bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The touchscreen control panel allows for easy and intuitive programming and operation of the machine. After loading, the tube is clamped in the travelling chuck, ensuring precise tube positioning for dimensionally accurate geometries. Standard equipment also includes a check of tube geometry prior to bending: if the bending process is initiated from the wrong position, the machine will not start, preventing operator errors. Optional additional features provide more comfort, increase output, and enhance overall system efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is possible via USB stick or by FTP access from the computer to the machine control. USB or LAN ports (RJ45) are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard Equipment: → Electromechanical drive for the bending axis 4 kW → Bending speed 2.9 rpm (=17°/sec) → Bending direction: left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending spindle diameter 50 mm → Electronic length measurement ±0.1 mm → Electronic rotation measurement ±0.1° → Manual stop system (mechanical stops for length) → Manual indexing system (15° increments for rotation) → Three-jaw chuck for tube clamping on the carriage → External operator panel PLC Control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot pedal operation → Data transfer via (W)LAN or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. Once length and angle are entered, the system calculates the feed values and bending angles automatically. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable pre-retract mandrel Options (can be ordered as extras): → Variable bending speed via frequency inverter or servomotors → Automatic tool retraction (manual or controlled) → Pneumatic chuck Iasdpfx Aettah Rsf Iel → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (on wheels) → Radius extension Images show a new machine.