Stelažinis krautuvas ETV 325, kėlimo aukštis 7300 mm

Jungheinrich ETV 325 2500kg 7400mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 930088, Country of Manufacture: CH Kwodpfxow Ucyus Af Iet Voltage: 400V / 50/60Hz / 3ph. Net Weight (machine + cabinet): 3250 kg + 400 kg Customs Tariff Number: 8456.30 20 Dimensions: 260x281x225 cm TECHNICAL SPECIFICATIONS Machining Type: immersion Maximum workpiece dimensions: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table size: 900x600 mm Floor to table distance: 900 mm Total dielectric volume: 1200 L X, Y, Z, U, and V axes X, Y, Z travels: 550 x 350 x 400 mm U, V travels: 550 x 350 mm Anti-collision protection: X, Y, U, V, Z axes Taper machining, max. cone: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (option 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: double Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data provided without liability for errors or omissions.

Sąlyga: geras (naudotas), Gamybos metai: 1989, veikimo valandos: 64 136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bedway cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal and face: 0.5 – 5000 mm/min Rapid traverse longitudinal + face: 9 m/min Main drive: 30 kW Machine dimensions with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Kwedpevr Eh Eofx Af Iet Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC hand-input control with program input via function and numeric keypad. All information is entered interactively via screen dialogue. Integrated menu technology and plain-text display of all functions. Operating keypad, screen, and handwheel are housed in a separate chip protection panel. The EPL control provides the following capabilities: Programs can be entered and modified directly by the operator via the EPL control without prior manual programming preparation. NC programs according to ISO/EIA standard can be entered or output via the RS 232 serial interface, or entered manually. Machining cycles: Roughing cycles for longitudinal, facing, and contour turning, including allowance. Threading. Undercuts according to DIN 509 Form E and F and DIN 76, including programmable grinding allowance. Axial and radial grooves to DIN 471 and 472, also with bottom finishing. Radii 90° and chamfers 45°. Automatic tool nose radius compensation for cycles, undercuts, grooves, radii, chamfers. Programming: Block-oriented, metric/inch, diameter in absolute input mode, radius in incremental input, full-circle programming, subroutine technique, skip levels for program sections. Workpiece zero offset. Mode selection via menu. Program input and output: Interactive via menu with operator guidance or directly in dialogue • Hydraulic 3-jaw chuck, Ø 315 mm, with through-spindle bore Ø 80 mm • Hinged chip conveyor • 12-station VDI 40 turret, 6 standard tool positions + 6 driven tool positions • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 miscellaneous standard tool holders (details to be discussed on site) Overhauled servo drive for the main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Demag Ergotech - System 250/280-80 Clamping force: 25 tons Kwsdpfshrw Amox Af Ist Screw diameter: 25 mm Year of manufacture: 2003 Sprue picker 2 units

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, OKUMA Euro Center V50 Year of manufacture: 2002 Kwjdpforfw Nhsx Af Ist Control system OSP-U100L Travel distances X-axis: 1020 mm Y-axis: 510 mm Z-axis: 525 mm Table load capacity: 680 kg Clamping surface: 1200 x 510 mm Tool changer 20 magazine slots Chip conveyor

Sąlyga: naudotas, Gamybos metai: 2009, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 73136, X ašies eiga: 1 350 mm, Y ašies eiga: 1 150 mm, Z ašies eigos atstumas: 720 mm, nominali (akivaizdi) galia: 64 kVA, valdiklių gamintojas: Heidenhain, valdiklio modelis: iTNC 530, bendras aukštis: 3 150 mm, bendras ilgis: 5 605 mm, bendras plotis: 4 290 mm, bendras svoris: 12 600 kg, veleno greitis (min.): 15 000 aps./min, veleno veikimo valandos: 21 786 h, įrankių magazino lizdų skaičius: 46, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in working condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 probing system. Operating hours (as read): - Control on: approx. 112,194 h - Machine on: approx. 72,272 h - Spindle on: approx. 21,786 h - Programs: approx. 21,654 h Condition: Used machine with standard signs of use, technically functional. Inspection under power available by appointment. Working Areas Travel paths: - X-axis: 1350 mm - Y-axis: 1150 mm - Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Ksdpfxex Eh Iqe Af Ijwt Spindle - Standard spindle 15,000 rpm - Speed range: 0–15,000 rpm - Acceleration time to max. speed: approx. 2.5 s - Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) - Torque: 193 Nm (S6 = 40% duty cycle) - Tool holder: HSK-A63 (DIN 69063-1, optional ISO-B40/DIN 69871) - Max. tool diameter: 130 mm (fully loaded) - Bearings: Ceramic-hybrid Ø 70 / Cronidur-Steel - Lubrication: Permanently lubricated - Cooling: Water with corrosion protection Feed Drives - Feed motors: AC - Rapid traverse/working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle/h) - Measuring systems X/Y/Z: Linear scales (direct) Rotary Table - Clamping surface: Ø 1100 × 1000 mm, flattened sides - Table load: 1600 kg - T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm spacing) - Centering bore: Ø 50 H6 - Clamping torque: 8000 Nm - Max. mass moment of inertia: 75 kg·m² - Table height above floor: 1120 mm - Table drive: Torque motor, direct - Drive torque: 1600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) - NC swivel range: +16° to −120° - Measuring system: direct, absolute - Clamping principle: hydraulic, stepless - Max. swivel speed: 4000 °/min - Max. working swivel torque: 600 Nm (S6 40%) - Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer - 46-position magazine (installed as per documentation) - Magazine slots: 46 - Tool holder: HSK-A63 (DIN 69063-1), optional ISO-B40 - Max. tool diameter: 80 mm fully loaded 130 mm partially loaded - Max. tool length: 300 mm - Max. tool weight: 8 kg - Magazine capacity: 200 kg - Chip-to-chip time (vertical): 11 s Coolant / Chip Conveyance - External coolant supply (AKZ): 40 l/min, 2.5 bar - Internal coolant supply (IKZ) Electrical Data: - Installed nominal power: 75 kW - Connected load: 58 kW - Power input: 64 kVA - Control voltage: 24 V DC - Operating voltage: 3 × 400 V, 50 Hz - Protection class: IP54 Dimensions & Weight - Machine weight: approx. 12,600 kg (without accessories) - Required space (L × W × H): 5605 × 4290 × 3150 mm

Sąlyga: naudotas, Gamybos metai: 2000, Didžiausias apdirbimo skersmuo: 20 mm Didžiausias apdirbimo ilgis: 320 mm Veleno praėjimas: 24 mm Veleno greitis: 200–10 000 aps./min Valdymas: MITSUBISHI CNC ilginis tekinimo automatas | CITIZEN - M-20 su strypų padavėju. Staklės yra labai geros, prižiūrėtos būklės. Kwsdpfxovnwfzs Af Ist Daugiau techninės informacijos rasite pasiūlyme.

Sąlyga: paruoštas naudoti (naudotas), Number of tool stations: 25, max. spindle speed: 6300 rpm, taper: SK40 with DIN 7388 drawbar, connected load: 35 kVA, control: Deckel Maho MillPlus, operating/spindle hours: 56,344 / 14,965 h, equipped with chip conveyor and 600 l coolant tank, supplied without tools and clamping devices. Kwsdpjlbmtnefx Af Ist

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, X ašies eiga: 600 mm, Y ašies eiga: 450 mm, Z ašies eigos atstumas: 450 mm, nominali (akivaizdi) galia: 10 kVA, bendras svoris: 6 500 kg, veleno greitis (maks.): 20 000 aps./min, Heidenhain TNC530, 4 ašies daliklis velenas 20 000 aps./min, HSK 63 stalas 850x530 mm ėjimai 600x450x450 mm 30 įrankių keitiklis svoris 6 500 kg Kodpfxew Dc Ire Af Iowt

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, veikimo valandos: 1 600 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 800 mm, Y ašies eiga: 650 mm, Z ašies eigos atstumas: 550 mm, sukimosi greitis (maks.): 6 300 aps./min, bendras svoris: 5 500 kg, veleno greitis (maks.): 6 300 aps./min, Universalus apdirbimo centras Deckel Maho DMU 80T Pagaminimo metai: 2000 Valdymas: Heidenhain Darbo valandos: ~1.600 h Techniniai duomenys: Veleno apsisukimai: 0 - 6.300 min-1 Veleno sukimo momentas: Įrankio laikiklis: SK 40 Įrankių sandėlio vietų skaičius: 24 X ašis: 800 mm Y ašis: 650 mm Kwedpfowq Dmcjx Af Iot Z ašis: 550 mm Priedai: - KSS sistema - 30 įrankio laikiklių SK 40 - 1 vnt. mašininis spaustuvas Staklės labai geros būklės, naudotos mažai.

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 mm - Max. machining length: 200 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° - Number of tool holders: 2 TOOL HOLDER 1 - Number of stations: 5 TOOL HOLDER 2 - Number of stations: 5 - Number of driven stations: 4 - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 6,000 rpm SUB OPERATIONS - Number of stations: 7 - Number of driven stations: 3 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 14 kW DIMENSIONS AND WEIGHT - Required floor space: 2,270 x 1,650 mm - Machine height: 2,200 mm - Machine weight: 3,500 kg OPERATING HOURS - Operating hours: 80,490 hrs ACCESSORIES - Control system: Fanuc - Driven tools powered at: S2, S3, S5, S6 - Driven guide bush - Part removal unit - Parts ejector - Chip conveyor - Coolant tank Ksdpfxsuha Uge Af Iowt * with high-pressure pump - Bar feeder: ROBOBAR SBF 532 - Oil mist extractor - Coolant reservoir