Pjovimo pjūklas

JRIMAC - Stoll JRIMAC Längskreissäge Standard

Būklė: naujas, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Cpodpsd H Sc Eofx Aahew Gesamtmotorleistung: 77,12 kW Motorleistung 1. Aggregat: 22 kW Motorleistung 2. Aggregat: 30 kW Motorleistung 3. Aggregat: 18,5 kW Schleifbandabmessung: 1330 x 2200 mm Betriebsdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportabmessungen: 3090 x 2020 x 2260 mm Gewicht: 4.700 kg

Būklė: naujas, Gamybos metai: 2025, Concept Easy yra ideali montavimo pagalbinė priemonė kai montuojamos kaištinės jungtys korpuso presavimo metu bei gaminant stalčius. Trumpas pristatymas: • Nedidelis užimamasis plotas, mažiau nei 1,8 m² • Potenciometras beslenkiam spaudimo jėgos reguliavimui • Minimali spaudimo jėga: 300 daN (kg) • Maksimali spaudimo jėga: 2200 daN (kg) • 3 presavimo ir reguliavimo greičiai: 5 / 10 / 25 mm/s (su tikslia pozicionavimu / lėtu režimu) Codpfx Aedx Daajahepw • Laisvai nustatomas presavimo laikas su automatinio atidarymo funkcija

Būklė: geras (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, obliavimo plotis: 2 050 mm, aukščio reguliavimo tipas: pneumatinis, obliavimo aukštis: 300 mm, 4-side planer, working width: 2200 mm, mounted on a turntable for curved parts, enclosed machine Cpsdpfx Aow A A Eboahjw

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 500 h, Funkcionalumas: visiškai funkcionalus, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain after the finger-jointing press, foldable Cpjdowclkyspfx Aahsw - Drying paternoster approx. 7 m, for board lengths up to 6 m - Cut-off and zero saw - Conveyor belt for residual wood disposal - Stacking system - Batten magazine not for sale - Package cross conveyor The machine is in very good condition, with very few operating hours. Machine is still assembled, but available immediately.

Būklė: naujas, Gamybos metai: 2024, Magnetic separator for chip conveyor line Tube magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Tube diameter: 180 mm Cpedpfxscqvhwj Aahsw Location: In stock at 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2024, ♻ Universalus pritaikymas (mediena, padėklai, įskaitant vinis ir smeiges, medienos plaušo plokštės ir likučiai, fanera, MDF plokštės, plastikas ir kt.) ✔ Variklio galia: 18,5 kW ✔ Rotoriaus ilgis: 870 mm ✔ Rotoriaus skersmuo: 270 mm ✔ Rotoriaus apsisukimų dažnis: 80–120 aps./min Cpedpfx Aashzlr Iehsw ✔ Pjaustymo peilių skaičius: 2x19 ✔ Granuliavimo dydis: 10–50 mm ✔ Našumas: iki 7 m³/val.* ✔ Nusiurbimo jungtis: 200 mm ✔ Užpildymo anga: 1446 x 1565 mm ✔ Matmenys (I/P/A): 2,15/1,97/2,04 m ✔ Svoris: 2050 kg 2 metų garantija arba 2000 darbo valandų

Būklė: naudotas, Gamybos metai: 2010, Chalet Construction Machine Used, good condition, low operating hours Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 CE type tested Up to 140 mm round timber corner joints Saw: 1x Drilling: 1x Milling: 3x Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Cpodpfsvwfqqex Aahew Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Būklė: naudotas, Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, obliavimo aukštis: 250 mm, darbinis plotis: 410 mm, bendras svoris: 5 500 kg, Obliavimo staklės REX TIMBERWORK 410x250 mm + 4x nuožulnūs kraštai + pjūklo velenas Cpedowmm Alepfx Aahjw Pagaminimo metai: 1998 Vieta: Prancūzija, Savojus

Būklė: naudotas, Gamybos metai: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: - Designed for classic nesting machining with wear plate - Machine frame in welded construction with ground and hardened prism guides for the gantry, aggregate head, and consoles - Gantry-type carriage - Helical rack and pinion drive in X and Y axes, ball screw drive in Z axis for precise positioning - Machining dimensions: - Maximum support surface on nesting table: X = 3100 mm, Y = 1560 mm - Maximum travel ranges: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Maximum clearance height DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed - Vector speed: 128 m/min - X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous machining table with grid division - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum zones: single-circuit vacuum system - Drill unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shape arrangement - 5+4 in X and 4 in Y direction - 32 mm grid - Max. drill diameter: 35 mm - Total drill length: 70 mm from mounting end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternate CW/CCW - n(max): 1000 - 4400 rpm, infinitely variable - Mounting: M10 thread, locating seat 11 mm - Without tools, without collets - 6 horizontal spindles: - 2 twin drill spindles in X direction - 1 twin drill spindle in Y direction - Mounting: M10 thread, locating seat 11 mm - Max. drill length: 63 mm from mounting end - Without tools, without collets - Milling unit 7842: - Power: 12.0 kW (S6) - n(max) = 1000 - 24000 rpm, infinitely variable - Maximum output at 12000–24000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand rising locknut (for right-rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid) - Tool weight max. 6 kg (including holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety guarding in accordance with CE standards - Safety fence at sides and rear - Vacuum pump: 500 m³/h, dry-running - Personnel safety by light barriers in the front machine area - Handheld remote control with the following functions: - Start/stop of machining programs - Machining cycle speed control - Reset button - Manual feed / rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software, 1x machine license including: - CAMPUS NC-HOPS: - Graphical variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface Cpedpfx Aaewka Upehsw - Automatic central lubrication - Automatic lubrication according to defined intervals - Additional sealing against dust via positive pressure in each guide carriage

Būklė: naudotas, Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus,