Cilindrinė šlifavimo mašina

John Scheer SAXW 1000

Sąlyga: geras (naudotas), Gamybos metai: 1994, CNC Spiral-Biegemaschine, Kapazität 50 cm³, min.-max. Wickeldurchmesser 500–3.500 mm. Gedpfxsiu Acps Abdoil

Gamybos metai: 1979, Sąlyga: paruoštas naudoti (naudotas), Max. Schleifdurchmesser: 300 mm, Max. Schleiflänge: 1.950 mm, Max. Werkstücklänge: 2.000 mm Max. Vorschubgeschwindigkeit: 1–30 m/min Kühlmittelzufuhr: 100 l/min Stufenlos regelbarer Drehzahlbereich: 2.000–6.000 U/min Spindel: 88 mm Spitzenhöhe: 150 mm Schleifscheiben: 100–250 mm Spindelleistung: 3,5 kW Gedpfjhq Uigox Abdoil Gesamtleistung Schleifmaschine: 15 kW – 380 V – 50 Hz

Sąlyga: naudotas, Surface Grinding Machine BLOHM Type HFS 6 Serial No.: 10493 Year of Manufacture: 1973 Electro-magnetic chuck 600 x 300 mm Grinding length 600 mm Grinding width 400 mm Table longitudinal travel max. 650 mm Cross travel 350 mm Distance spindle center - table surface max. 600 mm Distance spindle center - magnetic chuck max. 517 mm Table clamping area 1020 x 300 mm Grinding wheel diameter 300 mm Grinding wheel width 50 mm Grinding wheel bore 76 mm Table longitudinal feed 2–30 m/min, stepless Table cross feed 2–65 mm, stepless, electric Cross rapid traverse 3 m/min Vertical feed 0.001 – 0.020 mm per feed pulse Vertical rapid traverse 0.250 m/min Grinding wheel speed 1400 / 2800 rpm Motor power hydraulic pump 2.2 kW Motor power grinding spindle 5 / 6 kW Electrical connection 380 Volt, 50 Hz Total connected load 11 kW - Automatic depth infeed - Hydraulic table longitudinal movement - Grinding wheel dressing unit on the spindle head - Electromagnetic plate, construction height 83 mm Giodpjd Hbafjfx Abdol - Side-mounted coolant unit with magnetic filter in the filter housing - Recirculating grinding spindle lubrication - Freestanding electrical cabinet (800 x 500 mm) - Swiveling control panel - Operating manual and spare parts list Space requirements L x W x H: 3000 x 2200 x 2100 mm Weight of surface grinding machine: 3000 kg Weight of control cabinet: 200 kg Good condition

Sąlyga: naujas, Pre-bending: 13.0 mm Sheet length: 3,100 mm Sheet thickness: 16.0 mm Total connected load: 17.5 kW Approx. weight: 11.6 t Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar to actual product Bending capacity: 16.0 mm » at 3x upper roll diameter Pre-bending: 13.0 mm » at 1.5x upper roll diameter Upper roll diameter: 300 mm Lower roll diameter: 270 mm Side roll diameter: 210 mm Max. opening: 50 mm Working height: 1,140 mm • Fully hydraulic drive of upper and lower rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection Gisdpfx Absd Auacodjl • Mobile control console • Operating manual in GERMAN and ENGLISH • Machine and equipment conform to CE regulations Important points for cone rolling: • Maximum sheet thickness is 50% of the rated capacity • Cone length may be max. 30%, or must be more than 60%, of the roll length • Hardened rolls are recommended

Sąlyga: naudotas, Swing diameter over bed: 2400 mm Swing diameter over cross slide: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Faceplate diameter: 1650 mm Speed range: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over cross slide: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm (with special jaws up to 2050 mm) Clamping diameter in tailstock faceplate: 300 - 1400 mm Max. workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speeds, infinitely variable in 4 steps: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center cone angle: 70° Slides Gijdpjxddvnsfx Abdel Travel of grooving slide: 500 mm Travel of plan slide: 1400 mm Rapid traverse long axis: 2000 mm/min Rapid traverse plan axis: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, plan: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Diameter of faceplate (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange center cone angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying attachment for first support - Copying length: 8500 mm - Max. copying depth in one pass: 500 mm Boring attachment - Boring bar: 460 x 390 mm - Boring diameter: 600 - 1000 mm - Max. boring depth in one pass: 2700 mm For Ks of 200 kp/mm² - s max. = 1.5 mm/rev - a = max. chip section 30 mm² with 1000 mm overhang - With increasing boring depth, chip section is reduced One taper turning guide, setting angle up to 8° and max. taper length (in one process) of 2000 mm, setting accuracy ± 5 minutes. One taper turning guide, setting angle up to 15° and max. taper length (in one process) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane at the headstock.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2010, Maschinentyp: CNC-Rundschleifmaschine Hersteller: Fritz Studer AG Modell: S22 Baujahr: 2010 Steuerungssystem: FANUC 31i-A CNC Maschinenbett: Granitan® S103 Mineralguss Ausführung: Fester Geradschleifkopf für Außenrundschleifen (Außendurchmesser) Automatisierung: Automatisches Beladesystem mit Integration eines FANUC-Roboters Gijdpfx Ajwl Uvksbdol Spitzenweite: 650 mm Spitzenhöhe: 175 mm Max. Werkstückgewicht: 150 kg Max. Werkstücklänge: 700 mm Max. Werkstückdurchmesser: 449 mm Schleifscheibendurchmesser: 610 mm Schleifscheibenbreite: 160 mm Schleifscheibendrehzahl: Bis zu 3.200 min⁻¹ Spindelleistung: 15 kW Schleifkopf: Feste, gerade Ausführung Verfahrweg X-Achse: 310 mm Verfahrweg Z-Achse: 850 mm Max. Eilgang X-Achse: 15.000 mm/min Max. Eilgang Z-Achse: 30.000 mm/min C-Achse: Vollständige Rundumdrehung des Werkstückkopfes Programmieroberfläche: StuderWIN mit FANUC 31i-A Zusatzsoftware: StuderGRIND Automatisierungsschnittstellen: Standard-Schnittstellen für Lader und Peripheriegeräte Weitere Ausstattung: Abrichtgerät (Rotationsabrichter), Heidenhain-Maßstäbe, diverse Spannmittel

Sąlyga: naudotas, Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 124, Kaina pagal užklausimą Gjdpfx Abewl An Isdoil Naudotas CNC vertikalus tekinimo staklės Gamintojas: MORI SEIKI Modelis: VL 55 Pagaminimo metai: 2001 Su CNC valdymu MSC 518, 12 pozicijų revolverine galvute ir drožlių transporteriu Tekinimo ilgis = 653 mm Tekinimo skersmuo = 550 mm X ašis = 350 mm Z ašis = 660 mm Sukimosi greitis iki = 2000 aps./min. Veleno galia = 30 kW Svoris apie = 12,5 t

Sąlyga: naudotas, Technical Details: x-travel: 6500/13150 mm y-travel: 4000 mm z-travel: 1250 mm w-axis: 2250 mm Table surface: 5500/12150 x 3000 mm Maximum workpiece weight: 70,000/105,000 kg Ram dimensions: 480 x 510 mm Milling spindle motor: 63 kW Spindle torque: 3300 Nm Tool holder: DIN 39871 AD ISO 50 Milling spindle speed range: 6.3 - 4000 rpm Feed rate: 1 - 24,000 mm/min w-axis: 1 - 6000 mm/min Distance between columns: 3500 mm Clearance height: 3000 mm Total power requirement: 120 kW Gjdpfx Abowc A Shodoil Machine weight approx.: 245 t Required floor space approx.: 29.0 x 7.7 x 8.1 m The machine is in an almost as-new condition and was fully modernized in 2020! with CNC SIEMENS 840 D automatic tool magazine for 153 tools automatic milling head magazine for 6 milling heads Machining module - straight - extra-long - Machining module - standard angle - 4000 rpm, 144 x 2.5°, ISO 50 Machining module - slim, extended angle - 40 kW, 4000 rpm, 1800 Nm, 144 x 2.5°, ISO 50 Machining module - universal index - 40 kW, 4000 rpm, 2100 Nm, C-axis 144 x 2.5°, B-axis +/- 44 x 2.5°, ISO 50 Coolant system, chip conveyor

Sąlyga: naudotas, Gamybos metai: 2005, Technical details: Screw diameter: 90 mm Shot weight in polystyrene: 1,758 g/PS Clamping force: 6,500 kN Gsdpfx Abotunccjdoil Approx. machine weight: 32 t From serial production

Sąlyga: geras (naudotas), Gamybos metai: 2004, Ref. No.: Lg 34522 High-Performance Punch Press HAULICK+ROOS ROS 500 - 1250 used, in good condition Year of manufacture: 2004 (without soundproof enclosure) Gjdoip Uqmepfx Abdjil includes: - Infinitely variable drive - 2-connecting rod drive system - Pneumatic clutch-brake combination - Stroke adjustment - Siemens PC 670 screen control - Recirculating oil lubrication Technical Specifications Maximum pressing force: 500 kN Stroke rate: 30 to 900 strokes/min Stroke: 12 to 60 mm Shut height (max, stroke in B.D.C.): 320 mm Upright opening: 1,250 mm Table area: 1,250 x 730 mm Table pass-through opening: 1,160 x 140 mm Ram area: 1,250 x 450 mm Ram adjustment: 60 mm Drive power: 26 kW Weight: approx. 11,000 kg Dimensions (L x W x H): approx. 2,800 x 1,300 x 3,250 mm Equipment and Accessories: Servo roll feed VAMCO SP 150 Year of manufacture: 2014 Passage width: max. 150 mm Material thickness: max. 3.0 mm