Mobilus kranas

JMG MC 250

Būklė: naujas, Gamybos metai: 2026, keliamoji galia: 25 000 kg, kėlimo aukštis: 2 470 mm, bendras ilgis: 6 520 mm, - Charger Manufacturer: Zivan - Model: Battery Charger NG9 - Input: 400V, 12A, 50-60Hz - Output: 96V, 80A - Rear group with two independently rotating units - Front axle drive with counter-rotating movement - High free-lift mast - Removable counterweights - Extendable rear group: 7720 mm - Max fork lifting capacity with extended rear group: 25t @ 0.9m - Max fork lifting capacity with retracted rear group: 16.5t @ 0.9m - Drive: front axle drive with counter-rotating motion, 2 x AC electric motors, 12 kW, 96V each - Total weight with forks: 25,000 kg - Total weight with jib: 25,000 kg - Fork carriage and fork shank: 3,000 kg - Weight of crane mast: 3,000 kg - Weight of removable counterweights: 6,000 kg Dodpfx Ajyzudtoc Dsur - Battery: 96 V - 1050 Ah - Service brake: hydraulic, foot operated - Parking and emergency brake: hydraulic with automatic control - Steering: via rear axle - Parking and emergency brake: hydraulic with automatic control - Jib angle from mast: +12°/-7° - Motor: 1 x AC electric pump, 35 kW, 96V

Būklė: naujas, Gamybos metai: 2026, Completely overhauled, as-new machine, upgraded to the legally required safety standard 'state of the art' in accordance with the occupational health and safety regulations. Control Cabinet Electronics Installation of a new CE-compliant control cabinet in accordance with the latest legal requirements specified by the German Social Accident Insurance (Berufsgenossenschaften): BGVA 3 / DIN-EN 60204-1—new machine standard. Optionally, the complete machine can be supplied in CE configuration. A CE Declaration of Conformity will be issued for the machine. Thus, FPS Werkzeugmaschinen GmbH takes on the role of manufacturer. The machine thereby meets the requirements of the Occupational Safety Ordinance (BetrSichV). Consequently, the year of manufacture corresponds to the actual delivery date of the machine. Relevant standards: EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control System 3-axis FPS Aktiv digital display Spindle Speed 25–2500 rpm, direct-drive transmission with 18 geometrically graded speed levels for maximum torque / milling performance Feed Rate 5 to 500 mm/min, steplessly adjustable Rapid Traverse 1.2 m/min Quill Extendable quill, vertical stroke 100 mm, SK40 with M16 drawbolt thread Optionally: with DECKEL saw thread S20 x 2 Extendable quill, horizontal stroke approx. 100 mm Dsdpjh Sptnefx Ac Deur Axes X/Y/Z: 800/300/400 mm Table Fixed angle table 1000 x 440 mm, load capacity 2000 kg Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° Options • Z-axis bellows • Chip tray • Machine lamp • Central lubrication system • Universal table • Rotary table • Slotting head • Dividing attachment • Steady rest • etc.

Būklė: naudotas, bendras ilgis: 5 770 mm, Gamybos metai: 2019, keliamoji galia: 25 000 kg, Kranas JMG MC 250, elektrinis pavara, pagaminimo metai 2019, keliamoji galia (kg): 25.000 Djdpfx Aeyzudgec Djur

Būklė: naudotas, mašinos/transporto priemonės numeris: 1077, Gamybos metai: 2023, veikimo valandos: 81 h, kėlimo aukštis: 8 000 mm, kuro tipas: dyzelinas, variklių gamintojas: -, Kėlimo galia: 25 000 kg Duedpfxewfcdio Ac Der Statybinis aukštis: 286 cm Priekinių padangų būklė: 95% Galinės padangos būklė: 95% Priekinės padangos: - Galinės padangos: - Transportavimo matmenys (I x P x A): 4,12 x 1,8 x 2,85 m Norėdami gauti daugiau informacijos, kreipkitės į PFEIFER GROUP.

Būklė: geras (naudotas), Please read the technical specifications thoroughly. If the machine is a potential investment for you, we request your complete identification, including a correct telephone number and email address, in order to provide a quotation. DECKEL Tool Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel paths: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Extension of working area to: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Dsdoxyc Tkjpfx Ac Dour Gear steps: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill stroke: 60 mm Feed X/Z axis: 5 – 500 mm/min Feed control: stepless Rapid traverse, X/Z axis: 1200 mm/min Feed Y axis: manual Fixed angle table: 600 x 210 mm Swivel vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data subject to confirmation! Features: For horizontal machining, the milling head is swiveled by 90 degrees and pushed to the rear. 3-axis precision digital readout HEIDENHAIN Stepless feed in X/Z axis The machine was partially overhauled by a specialist company several years ago. Equipment: 3-axis digital readout HEIDENHAIN Micro coolant spray unit Fixed angle table Chip tray Machine lamp Machine feet Further accessories on request! Condition: Good to very good, from training workshop Available from March 2026

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, veikimo valandos: 50 h, keliamoji galia: 25 000 kg, kėlimo aukštis: 2 600 mm, laisvas kėlimas: 1 100 mm, kuro tipas: elektrinis, stiebo tipas: dupleksas, statybinis aukštis: 2 900 mm, šakių laikiklio plotis: 1 800 mm, šakių ilgis: 2 400 mm, tuščias svoris: 25 000 kg, bendras ilgis: 4 120 mm, pavaros tipas: Elektro, statybos plotis: 1 800 mm, Heavy-duty forklift - Electric Load center: 900 mm Fork width: 1800 mm Fork thickness: 100 mm ISO class: Pin-type Mast type: Duplex Condition: As new Dsdjwwyx Ijpfx Ac Dour Technical condition: very good Hydraulic fork positioner, cabin, joystick control, remote control

Būklė: naujas, bendras ilgis: 4 470 mm, Gamybos metai: 2025, keliamoji galia: 25 000 kg, Crane JMG MC 250S Drive: Electric Year of manufacture: 2025 Lifting capacity (kg): 25,000 Dujdoxd Hw Ijpfx Ac Der

Būklė: naujas, Gamybos metai: 2026, The ZX7045 B1 DRO milling and drilling machine is an advanced tool designed for precise metalworking. It excels in drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, as well as tapping threads up to M12 mm. With a milling capacity of up to 80 mm width and keyway milling up to 22 mm, this machine ensures versatile use. The ZX7045 B1 DRO variant is distinguished by an automatic spindle feed, increasing operational efficiency. Additionally, it is equipped with digital readout for enhanced accuracy, and a cooling system to maintain optimal temperature during machining. This machine is ready for immediate use and available directly from stock. It is ideal for professionals seeking high quality and performance in metalworking. Product Features: - HEAVY, STURDY CAST IRON CONSTRUCTION - AUTOMATIC SPINDLE FEED - MILLING HEAD HEIGHT IS ADJUSTED ON THE SUPPORT, NOT THE COLUMN - ADDITIONAL LIQUID COOLING - MASSIVE CROSS TABLE WITH PRECISELY GROUND SURFACE - DOVETAIL GUIDEWAYS - QUIET OPERATION THANKS TO GROUND GEARS - LEFT AND RIGHT SPINDLE ROTATION - ROTATING HEAD +/- 90° - ADJUSTABLE HEAD HEIGHT - DIGITAL READOUT - Optional base available TECHNICAL SPECIFICATIONS: DRILLING CAPACITY IN STEEL: 32 mm DRILLING CAPACITY IN CAST IRON: 45 mm FACE MILLING CUTTER DIAMETER: 80 mm END MILL CUTTER DIAMETER: 28 mm SPINDLE SPEEDS: 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm (6/12) SPINDLE TAPER: MT4 SPINDLE TRAVEL: 125 mm (AUTOMATIC FEED) WORK TABLE DIMENSIONS: 820 mm x 240 mm BASE DIMENSIONS: 580 x 600 mm MAX SPINDLE TO TABLE DISTANCE: 445 mm SPINDLE TO COLUMN DISTANCE: 260 mm TRAVEL X/Y/Z AXIS: 515/175/430 mm QUILL FEED RATE: 0.12; 0.18; 0.25 mm/rev HEAD SWIVEL LEFT/RIGHT: 90° MOTOR POWER: 1.8 kW (2.5 HP) POWER SUPPLY: 400 V WEIGHT: 350 kg Available Accessories: - Drill chuck arbor MK4/B18 - Digital readout - Hand tools - Drill chuck 3-16 mm/B18 Duodpfxsud H H Uo Ac Djr - Reducing sleeve MK4/MK3 - Reducing sleeve MK3/MK2 - Operating manual in English

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2023, veikimo valandos: 58 h, keliamoji galia: 25 000 kg, kėlimo aukštis: 11 600 mm, kuro tipas: elektrinis, stiebo tipas: teleskopinis, statybinis aukštis: 2 198 mm, tuščias svoris: 28 240 kg, bendras ilgis: 5 826 mm, pavaros tipas: Elektro, statybos plotis: 2 150 mm, Pick & Carry Crane Mast type: Telescopic Condition: Like new Technical condition: Very good Front tire type: Non-marking Front tire size: 355/50-20 Front tire condition: 80 - 100% Dodpfxot Dd T Tj Ac Dsur Rear tire type: Non-marking Rear tire size: 355/50-20 Rear tire condition: 80 - 100% Fork positioner, Head and hook, jib (15t), jib and extension (7t), fork carriage (12t), optional hydraulic outriggers 3rd valve, 4th valve, rear work lights, front work lights, full cabin, CE certificate, non-marking tires, self-propelled, exterior mirrors, joystick, beacon, windshield wiper, single-pedal control, LED, seat, optionally with radio remote control

Būklė: paruoštas naudoti (naudotas), Lathe machine, manufacturer Takisawa, model TAL 510, with chuck, quick-change tool holder, and live center. Dodpfxsvyuuqo Ac Dsur