Medienos smulkintuvas, kapoklė

Jensen Först Bandit Schliesing Laski A540 DiXL V-2203 Spider Niveau

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, veikimo valandos: 3 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 237042, galia: 25 kW (33,99 AG), bendras svoris: 1 575 kg, kuro tipas: elektrinis, spalva: geltonas, From personal experience: The battery easily lasts an entire working day even under continuous operation. Internal reference number: M1241 Manufacturer: Schliesing Vehicle type: Trailer chassis Drive type: Electric Maximum log diameter: Ø 20 cm Feed width (mm): 240 Motor power: 25 kW – Torque: 120 Nm Year of manufacture: 2023 Operating hours: approx. 3 Net weight (kg): 1575 Equipment: Power Control System – Whisper Cut Chipper System Schliesing’s mid-range is now also available as an electric chipper – the Schliesing 325MX-E. The powerful, brushless asynchronous motor delivers 25 kW and 120 Nm of torque, ensuring productive work with the typical pulling power you expect. The batteries are designed to allow a full day of operation without recharging. The 325MX-E enables emission-free chipping at low noise levels while delivering uncompromised productivity with trunk wood up to 20 cm diameter. Engine and Chassis: – Brushless asynchronous motor, 25 kW, 120 Nm torque – Fully galvanized, corrosion-resistant single-axle chassis certified for 80 km/h including EU homologation – Robust, fixed and widened steel mudguards – Heavy-duty front jockey wheel and rear support stand – Hitch with overrun brake and Soft-Dock ball coupling or DIN towing eye – LED lighting to StVZO specifications (impact-protected) – Pneumatic tyres 205/65 R15 C Battery: – LEP battery (lithium iron phosphate) with 300 Ah capacity at 96 V – Enables full-day operation without recharging; no recharging required during long idle periods – Energy recuperation via kinetic energy recovery from the flywheel during operation – Charging port: Schuko connector 220–240V/16A – Full charging time: 8 hours – Warranty for 1,000 charging cycles at 80% SOH (State of Health) Housing / Hopper / Discharge Chute: Iiedpsvmz N Usfx Abkek – Foldable infeed hopper, minimum 1,500 mm feed depth – Fully galvanized, corrosion-resistant hopper flap – Hopper dimensions (interior): width = 1,040 mm, height = 960 mm – Swiveling discharge chute with adjustable deflector flap – Discharge chute mounted on ball-bearing slewing ring – Key machine parts soundproofed (especially chipper hood and discharge chute) – Two emergency stop buttons, one on top of the hopper, one on the side of the hopper flap Chipping Unit: – Chipping unit with safety interlock according to EN 13525 – Heavy-duty flywheel Ø 655 mm, 35 mm thick – Enclosed knife system for quick, safe, and precise knife changes – Continuously adjustable chipping knives – Knives can be re-sharpened multiple times for extended service life (approx. 10x) – Horizontal counter blade and vertical counter edge, both dual use for prolonged service life – Wrap protection on the main bearing of the flywheel Hydraulic Feed: – Feed control with independent hydraulic circuit – PowerGrip feed roller, 240 mm wide, with hydraulic feed. Particularly grippy, aggressive, and even feed due to individual oil motors for each roller – Parallel-guided upper roller for regular and even material feed, preventing jamming or skewing – Hydraulically adjustable feed speed for variable chip size – Hydraulic oil tank level indicator OPTION OVERVIEW: Whisper Cut® V-shaped knives feed timber more evenly and with less vibration In combination with the centering PowerGrip roller, material is reliably guided with minimal jarring during chipping

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, The Brugger PX130 wood chipper is powered by a tractor’s PTO and is capable of processing logs with a diameter of up to 13 cm. The robust construction and high-quality materials ensure reliable performance. Technical specifications: - Hydraulic feed - Maximum diameter: up to 13 cm - Weight: 420 kg - PTO speed: 540 rpm - Tractor power: 30–70 hp Featuring hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. Iedsrblwdjpfx Abkjik Contact us for your customized offer!

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, veikimo valandos: 3 h, Funkcionalumas: visiškai funkcionalus, galia: 33 kW (44,87 AG), bendras svoris: 1 570 kg, kuro tipas: dyzelinas, spalva: originalus, ašių konfigūracija: 1 ašis, kuras: dyzelinas, Schliesing 325EX-D Chipper: The Compact Model with Rotatable Chipping Unit The Schliesing 325EX-D chipper is a powerful wood chipper, featuring a robust engine, flexible feed options, and a durable design, making it ideal for demanding wood processing applications. With a swiveling infeed chute and a range of safety features, it meets the highest standards and offers an efficient solution for processing logs up to Ø 20 cm in diameter. Technical Data: Type: Schliesing 325 EX Log Diameter: Up to Ø 20 cm Infeed Width: 24 cm Engine Output: 33 kW / 44.9 HP Weight: Approx. 1,570 kg Features: Engine and Chassis: • Water-cooled, Stage V Kubota 4-cylinder common-rail turbo diesel engine with DPF, delivering 33 kW / 44.9 HP. • Industrial overrunning clutch between engine and chipping disc to protect the engine, bearings, and shaft. • Fully galvanized, corrosion-resistant single-axle chassis rated up to 80 km/h with EU type approval. • Robust, fixed steel mudguards. • Front jockey wheel and rear support stand. • Road lighting according to StVZO with impact-protected components. • Pneumatic tyres 205/65 R15C with EU type approval. Body/Chute/Discharge Spout: • Folding infeed chute with a minimum feeding depth of 1,500 mm. • Fully galvanized chute flap for longevity. • Chute dimensions (internal): Width = 1,040 mm, Height = 960 mm. • Swiveling discharge spout with adjustable deflector flap. • Discharge spout mounted on a ball bearing slewing ring for flexible orientation. • Sound insulation on critical machine components such as the chipping hood and discharge spout. • Emergency stop button both on top of the feed chute and on the side of the chute flap. Chipping System: • Rotatable chipper housing with adjustable feeding angle up to 270°. • Safety circuit compliant with EN 13525. • Chipping disc with a diameter of Ø 655 mm and a thickness of 35 mm. • Enclosed knife system for quick and safe knife changes. • Steplessly adjustable chipper knives, each regrindable multiple times for long service life. • Horizontal counterblade and vertical countershear, each double-sided for extended durability. • Anti-wrap protection on the main bearing of the chipping disc. Hydraulic Infeed: • Infeed control with independent hydraulic circuit. • PowerGrip feed roller (240 mm wide) with hydraulic infeed for strong and consistent material feed. • Parallel guidance of the upper feed roller for even feeding without skewing. • Hydraulically adjustable feed speed to control chip size. Ijdpfx Abjv Ev E Uekoik • Level indicator for the hydraulic oil tank.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, galia: 160 kW (217,54 AG), įėjimo įtampa: 380 V, garantijos trukmė: 12 mėnesiai, paskutinio kapitalinio remonto metai: 2023, Įranga: dokumentacija / vadovas, 1 Pellet mill, brand: Buhler DPAB Isdpfx Aberah Evokoik - Inner die diameter: 660 mm - Die working width: 138 mm - Mill is equipped with 1 motor, 160 kW. - Press door is made of stainless steel and features an overload relief flap. - 2-roller pellet press, fully overhauled with 2 rollers in either dimpled or corrugated execution. - The pellet mill is complete with die lifting device and tooling. - The mill has been fully overhauled and fitted with new bearings and wear parts such as front and rear scrapers, die alignment ring, etc. - Fitted with new V-belts. - All safety measures will be complied with and appropriate switches installed, including friction guard, door switch, and inspection hatches.

Sąlyga: naudotas, SPE Renergi žemos temperatūros džiovintuvas. Renergi džiovintuvas skirtas pjuvenų ir kitų medžiagų džiovinimui biokuro gamybai. Džiovintuvas gali džiovinti pjuvenas, žievę ar medžio drožles — sumažinant drėgmės kiekį nuo maždaug 50 % iki apytiksliai 10 %. Šis žemos temperatūros džiovintuvas naudoja šiltą (arba karštą) vandenį nuo rekomenduojamos 65 °C temperatūros ir aukščiau. Didžiausia vandens temperatūra – 110 °C. Energijos tiekimo sauga: džiovintuvas gali būti prijungtas tik prie 3x400 V AC (630 A) 50/60 Hz elektros tinklo su atskiru apsauginiu įžeminimo laidininku. Energijos tiekimo duomenys: • Įtampa: 400 V AC, trys fazės • Rekomenduojama saugikliai tiekimo linijoje: ne daugiau 3x630 A • Tipinė elektros galia: 200 kW Iijdpfswp Rqfex Abkek Džiovintuvo matmenys: maždaug 17,4 x 5,7 m, aukštis — 10,7 m. Reikalingas aikštelės plotas: apie 21,4 x 8,0 m. Mažiausias patalpos aukštis — 15 m (arba bent 4 m virš žaliavos padavimo angos). Oro tiekimas: mažiausiai 24 kg dujų/s šviežio oro reikia šiai mašinai veikti. Tai atitinka 20 nm³/s arba 72 000 nm³/val. Oro srautas: maks. 200 l/min Oro slėgis: min. 4,5 bar, rekomenduojama 6,0–8,0 bar Vandens tiekimas: karšto vandens tiekimas su srautu 32 dm³/s. Vandens slėgis: min. 1,5 bar, maks. 6,0 bar Darbinės temperatūros diapazonas: • Įeinančio oro temperatūra: –20 °C iki +50 °C • Santykinė drėgmė: 0 % iki 60 % Žaliava / terpė: • Santykinė drėgmė: 45 % – 55 % (pagal svorį) • Pageidaujama santykinė drėgmė išdžiovintoje medžiagoje: 8 % – 15 % Našumas: • Dvigubos kameros, 4 m pločio džiovintuvas tipiniu režimu vienu įkrovimu gali išdžiovinti 2400 kg 55 % drėgmės žaliavos • Džiovintuvas pajėgus per maždaug vieną valandą išdžiovinti 6000 kg žaliavos (nuo 55 % iki 10 % drėgmės) SRE džiovintuvas suprojektuotas pagal ES direktyvas. Įranga atitinka šių norminių aktų esminius reikalavimus: • Mašinų direktyva 2006/42/EB • LVD 2006/95/EB • EMC 2004/108/EB Džiovintuvas yra Straupės sen., Cėsių r., LV-4152, Latvija. Galima apžiūra darbo dienomis nuo 8:00 iki 17:00 val., iš anksto susitarus dėl apžiūros laiko. Džiovintuvas jau išmontuotas. Visos elektros schemos, eksploatavimo instrukcijos ir vadovai prieinami. Pageidaujant galime pateikti kontaktą pasikonsultuoti su šio tipo džiovintuvą eksploatuojančiu specialistu. Kaina: 20 000,00 EUR (PVM neįskaičiuotas).

Sąlyga: naujas,

Sąlyga: geras (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, šildymo galia: 50 kW (67,98 AG), Wood chip heating system with 50 kW thermal output, already dismantled. Complete with boiler, stoker unit, and discharge system. Iedpfxov Ngq Ao Abksik

Sąlyga: naujas, High-quality wood chipper for professional use – No problem with heavily branched material! Thanks to its road approval, the HX16 Pro can be transported quickly and easily to any location. The HX16 Pro wood chipper is specifically designed for professional applications, offering a robust construction and powerful drive system to effortlessly process even heavily branched material. Iijdpfx Aetr Azgobkek This chipper easily handles logs with an impressive diameter of up to 16 cm. It is powered by a robust 35 HP Rato petrol engine and features a no-stress automatic feed system that prevents engine stalling under overload and ensures smooth operation. The HX16 Pro comes equipped with an "AL-KO" chassis and a lighting system to meet all your requirements. Here are the outstanding features of the HX16 Pro wood chipper: - Maximum log diameter: 16 cm - Feed opening: 16.5 cm x 30 cm - 35 HP Rato petrol engine - No-stress automatic feed system - Hydraulic feed - Weight: 730 kg Experience the performance and reliability of a professional wood chipper with the HX16 Pro. Contact us for a customised offer!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Viesmann Vitoplex 100 LS with Weishaupt WM - G10/4A Iiodetrl Skspfx Abkek

Sąlyga: naudotas, Gamybos metai: 2020, mašinos/transporto priemonės numeris: T57F0019080055255, kuro tipas: dyzelinas, galia: 65 kW (88,38 AG), variklių gamintojas: -, Paskirtis: Statyba Tuščiasis svoris: 83 kg Generatoriaus galia: 8 kVA Iisdstr Ivwjpfx Abkok Transportavimo matmenys (I x P x A): 0,68 x 0,55 x 0,55 m Daugiau informacijos suteiks PFEIFER GROUP.