Rąstinių namelių gamybos mašina, sertifikuojanti

JELA STIL MASINE JSB-180

Sąlyga: geras (naudotas), Gamybos metai: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating principle Processing of timber for chalet construction / log house production. Beams can be processed in a single pass. • Cross-cutting • Horizontal and vertical milling of notches/grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Rugged welded steel construction. Machine (horizontal and vertical milling units) equipped with 4 special milling motors, hardened and ground guides for maximum processing accuracy. Carriage guided by dust-protected, preloaded ball bearing guide rollers. Working range up to 200 x 250 mm. Fully operational, with contactor control system; motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for customer-provided chip extraction system; includes 2 eccentric clamps; no milling tools (rebate cutter). Features electro-hydropneumatic horizontal and vertical feed, synchronized with the start of the milling motors. Rapid traverse and feed rate steplessly adjustable. Fully wired and installed, including air service unit. Beams thicker than 14 cm must be processed in two passes; for these beams, the workpiece must be fed again to the extent of the excess thickness for further milling. Machine guards over all moving parts with gas spring counterbalance. Machine description / equipped with: 1. Saw unit: Manual feed Spindle adjustment with analog scale display Max. saw blade Ø / bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (uni-directional) Adjustable riving knife Motor speed min⁻¹: 2900 Power (kW): 2.2 2. CM milling unit (log house unit): Hydropneumatic feed Spindle adjustment with digital scale display Horizontal milling unit: Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter width >60 mm only use aluminum alloy cutters with indexable inserts. 2 x hydropneumatic feed motors, each 2.2 kW Hydropneumatic feed; rapid traverse and working feed rate steplessly adjustable. 3. Drilling unit: Manual feed Spindle adjustment with analog scale display Drill chuck: ER 25 collet Max. clamp Ø: 16 mm Max. drill Ø: 32 mm Motor speed min⁻¹: 1450, Power (kW): 1.8 4. End milling unit: Hydropneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor min⁻¹/2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics Required operating pressure min/max. MPa (bar): 0.7/1 (7/10) Air consumption: 8 Nm3/h Electrics Operating voltage V/Hz: 380 V, 50 Hz Rated power: 8.8 – 15.8 kW depending on configuration Customer-supplied fuse: 3 x 25 A (slow-blow) Max. simultaneous power demand: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Total height, guard lowered: 1600 mm Total height, guard raised: 2200 mm Nedpfxsu Uh T Ds Ad Uswp Extraction port Ø (under-floor extraction) Weight: approx. 1300 kg Including roller conveyor 2 x 6 m (2 x 4 m) Technical data subject to change!

Sąlyga: naujas, Dedikuota mašina, skirta tiesios griovelio / išpjovos įvairoje medienos gaminių, naudojamų baldų gamyboje, bendrosiose staliaus dirbtuvėse, sodo baldų, sandėliukų, gegnių ir karkasinių konstrukcijų gamyboje, įpjovimui. Taip pat gali būti naudojama durų rėmų gamybai, gegnių atramų įpjovimui ir rąstinių namų gamyboje. Standartiškai įrengta horizontaliomis pneumo spaustuvėmis ruošiniams bei hidrochekinio amortizatoriaus valdymu, kuris užtikrina tolygų frezos eigos judėjimą. Tikslus rutulinių guolių judėjimas grūdinto plieno kreiptuvais. Tvirta lieto ketaus konstrukcija su plieniniu pagrindu. 3 kW variklis. Didžiausias įrankio skersmuo 250 mm. Įrankio vidinis skylės diametras 40 mm. Frezos variklio rankenėlės aukščio reguliavimas. Didžiausias išpjovos / griovelio gylis – 60 mm. Griovelio / išpjovos plotis – 60 mm per vieną pravažiavimą. Maksimalus įrankio eigos ilgis – 250 mm. Nedpfjdy Hm Djx Ad Uowp 2 horizontalūs ruošinio spaustuvai. Hidrochekinis skersinio pjovimo svirties amortizatorius. Dulkių nutraukimo jungtis – 100 mm. Mašinos stovas.

Sąlyga: geras (naudotas), Multiblade circular saw Raimann, in good condition, immediately available. Njdpfstukd Nox Ad Uswp If you are interested, we are also happy to inform you about other machines in our inventory. You are welcome to inspect the machine at our premises by prior appointment.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, Cross-profile milling machine for large and complex profiles of all kinds, suitable for furniture, stairs, and balcony railings. Tool clamping width: 250 mm Maximum tool diameter: 250 mm Milling height: 200 mm Milling depth: 65 mm Spindle diameter: 40 mm Motor power: 11 kW Milling spindle speed: 6,000 rpm Table size: 1000 x 410 mm Nwjdpfsv Up U Iex Ad Ujp 2 pneumatic clamps Two-hand operation

Sąlyga: naujas, Palečių išlyginimo įrenginys PNEUMATICO – skirtas palečių pozicionavimui ir išlyginimui. Standartiškai siūlome modelį, pritaikytą 18 palečių, tačiau pagal kliento pageidavimą galime pagaminti versiją kitokiam palečių kiekiui, pritaikytą individualiems poreikiams. Tvirta konstrukcija ir paprastas valdymas užtikrina patogų ir saugų naudojimą sandėliuose bei gamybos linijose. Nwedpfx Asxb Ubped Uop

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Log House Milling Machine BL100A, fully overhauled with factory warranty For log thickness up to 140mm, construction height up to 200mm, and processing length up to 9.0m • Infeed table (timing belt cross conveyor) and entry table for timber length 9m • Log house milling machine BL100A – four-spindle milling unit with hydro-pneumatic feed, 2x4kW / 2x3kW for cross-sections approx. 140x220mm • HM reversible insert tools included for wall thickness approx. 40–100mm • End groove milling unit 3.0kW with cutter B = 21–40mm Nodexxhwlspfx Ad Uswp • Drilling device with drill guide and drill bit D = 20mm • Integrated under-table cross-cut saw 4.0kW, saw blade D = 500mm • Pneumatic workpiece clamping with horizontal clamping jaws • Outfeed table 9m with push-off device and material storage table 6x1.5m • Servo slider positioning system with IPC control and IITO Control Software • Label printer for component identification, laser printer for printing production lists • Excellent condition, factory-refurbished & general serviced, with parts warranty, in ready-to-operate condition • Price & delivery time upon request. Subject to prior sale and all rights reserved

Sąlyga: geras (naudotas), Gamybos metai: 1994, Namelių pjovimo mašina su 10 metrų Tiger stop stūmikliu, įrengta: 1 viršutiniu horizontaliu frezavimo bloku, 1 apatiniu horizontaliu frezavimo bloku, 1 priekiniu/galiniu frezavimo bloku, 1 horizontaliu gręžimo bloku, 16 mm skersmens, 1 automatine 10 m Tiger stop atstumo riba, metai: 2001, naudingo darbo ilgis: 9,20 m. Nwedpfxoxbn N Ts Ad Usp

Sąlyga: naudotas, Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 1 500 mm, ruošinio ilgis (maks.): 7 000 mm, Powder Coating Line for Aluminum Profiles – Almost New, Fully Operational, Ready for Immediate Collection For sale: complete automatic powder coating line, brand NYS Equipments Co., Ltd., very lightly used and in excellent technical condition, currently operational in commercial production. The line is ideal for finishing aluminum profiles with maximum dimensions of 7,000 x 300 x 1,500 mm (L x W x H) and a capacity of up to 15 jigs/h. Main Technical Specifications: ✅ Process: Automatic electrostatic powder application with 16 automatic and 4 manual corona-type guns ✅ Curing Oven: Gas-fired (RIELLO), capacity 700,000 kcal/h, PID temperature control with ±2°C precision, internal dimensions: 11.1 x 7.8 x 2.59 m ✅ Drying Oven: Gas heating, 200,000 kcal/h capacity, internal dimensions: 8.0 x 1.5 x 2.3 m ✅ Conveyor System: Double-chain type, jig spacing 2,250 mm, 3.75 kW drive motor, automatic speed control (0–6 m/min), fully automatic lubrication system ✅ Powder Recovery System: Cyclone and after-filter with automatic vibrating sieve, fan capacity up to 19,263 m³/h, 24 long-fiber filters, automatic reverse air jet cleaning ✅ Control: PLC with touch-screen panel, complete monitoring and control of conveyor movement, oven temperature, and powder recovery system Additional Benefits: – Line is ready for immediate collection on an "as is, where is" basis – Test run and personnel training possible prior to collection – Dismantling and transport are not included in the price, but can be organized on site Nodpfowvaaiex Ad Uowp Price: €100,000

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: E737, bendras plotis: 2 650 mm, bendras ilgis: 3 900 mm, bendras aukštis: 3 400 mm, reikalingas plotis: 3 150 mm, vietos reikalavimas ilgis: 4 400 mm, reikalingas aukštis: 4 000 mm, bendras svoris: 3 400 kg, Die Maschine ist einsatzbereit. Sie stellt starre Schachteln ohne Klebeband her, mit einer maximalen Schachtelhöhe von 100 mm (Außenmaß). Anzahl der produzierten Schachteln: 2.101.468 Stück. Nsdpfx Adjwub Nie Uewp

Gamybos metai: 1996, Sąlyga: paruoštas naudoti (naudotas), Maximum grinding width 1000 mm Nwsdpeihaz Ujfx Ad Uop Single unit 15 kW motor Electric table adjustment