INGERSOLL GANTRY 800

INGERSOLL GANTRY 800

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Completely overhauled OPS Ingersoll Gantry 800 Eagle sinker EDM – technically and visually in top condition The machine has been thoroughly and professionally overhauled in our facility and is in excellent technical and visual condition. During the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully inspected and replaced as needed, including, among others, ball rollers and drive spindles. This was followed by complete geometric measurement, alignment, and additional inspection using a laser measuring system. The machine bed and entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic hoses, were completely replaced. The machine also received a brand-new paint job and presents itself in a very well-maintained visual state. The generator and control system were cleaned and technically inspected. The generator's cooling unit was also cleaned to ensure reliable cooling and stable operation. Gtodpoyr I Aiofx Ab Sjw Finally, the machine underwent comprehensive EDM testing according to OPS Ingersoll's quality and test standards. The machine is immediately available and ideally suited for reliable production use. Technical Data: - Ingersoll (OPS Ingersoll) - Sinker EDM machine - OPS INGERSOLL GANTRY EAGLE 800 - Year of manufacture: 2008 - Control system: EAGLE Powertec PC/NC 2060 - MultiProg Powertec technology programming on PC/NC - Powertec Easy Burn rapid programming - Powertec Handheld – multifunctional hand control device - Manual EDM with Powertec Handheld - High Speed Jump max. 18 m/min - Generator output: 60 Ampere, EAGLE Powertec - Travel range (X, Y, Z): 550 x 850 x 450 mm - Electrode changer: 20-position pick-up rotary changer - Work tank (W x D x H): 800 x 1100 x 480 mm - Work table (W x D): 760 x 1000 mm - Load capacity: 2,000 kg Accessories: - CO2 fire suppression system - Integrated cartridge filter system Special Equipment: - Linear measuring system on all axes (standard on Z-axis in this series)

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2013, X ašies eiga: 550 mm, Y ašies eiga: 850 mm, Z ašies eigos atstumas: 450 mm, ruošinio svoris (maks.): 2 000 kg, stalo plotis: 760 mm, atstumo iki veleno lentelė: 585 mm, stalo ilgis: 1 000 mm, ruošinio ilgis (maks.): 1 095 mm, ruošinio plotis (maks.): 795 mm, ruošinio aukštis (maks.): 480 mm, bendras svoris: 6 800 kg, paskutinio kapitalinio remonto metai: 2025, stalo apkrova: 2 000 kg, greitasis eiga Z ašyje: 18 m/min, Įranga: dokumentacija / vadovas, OPS INGERSOLL GANTRY EAGLE 800 Refurbished Year of manufacture: 2013 EAGLE Powertec PC/NC control 3060 22" display with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control device Manual EDM with Powertec Handheld EAGLE Powertec - Finish Generator PT 60, 60 Ampere High Speed Jump max. 18,000 mm/min. Travel ranges (X, Y, Z): 550 x 850 x 450 mm Distance table/electrode holder min. 135 mm / max. 585 mm Electrode changer 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Gtedpfxjyrqprj Ab Sow Worktable (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Head load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS, Hirschmann or System 3R (per customer request) ECOTEC energy saving function standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Būklė: naudotas, Gamybos metai: 1999, Table length: 850 mm Table width: 550 mm Amperage: 70 A Control: CNC MITSUBISHI 32bit Traversing paths (X/Y/Z): 550 / 850 / 450 mm Machine weight: approx. 6 t Required space: approx. 2.4 x 2.65 x 2.68 m Spark erosion machine / die-sinking EDM machine The machine is in very good condition. Features / Accessories: - Y-axis travel during electrode change and loading position: 1180 mm - Integrated C-axis head, adjustable rotation speed: 10/20 rpm - Integrated C-axis / head measuring resolution: 0.001 mm - Load capacity without changer: 50 kg - Load capacity with changer: 10 kg - Max. head load: 200 kg - Max. distance from tool holder plate to worktable: 585 mm - Min. distance from tool holder plate to worktable: 125 mm - Work tank: - Lifting tank dimensions (W x D x H): 800 x 1100 x 480 mm - Programmable/automatic dielectric fluid height: 440 mm - Filter cartridge type: integrated cartridges - Electrode changer system / pick-up rotary magazine slots: 20 Godpfeu Dbtljx Ab Sotw - Electrode weight / single electrode: 15 kg - Total changer capacity: 60 kg - Generator FP 70 ampere, multipulse - Electrode changer: 20-position pick-up linear changer - Electric hand pendant - Integrated CO₂ fire extinguishing system / Dielectric cartridge filter system

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Completely overhauled OPS Ingersoll Gantry 800 Eagle sinker EDM – technically and visually in top condition The machine has been thoroughly and professionally overhauled in our facility and is in excellent technical and visual condition. During the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully inspected and replaced as needed, including, among others, ball rollers and drive spindles. This was followed by complete geometric measurement, alignment, and additional inspection using a laser measuring system. The machine bed and entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic hoses, were completely replaced. The machine also received a brand-new paint job and presents itself in a very well-maintained visual state. The generator and control system were cleaned and technically inspected. The generator's cooling unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent comprehensive EDM testing according to OPS Ingersoll's quality and test standards. The machine is immediately available and ideally suited for reliable production use. Technical Data: - Ingersoll (OPS Ingersoll) - Sinker EDM machine - OPS INGERSOLL GANTRY EAGLE 800 - Year of manufacture: 2008 - Control system: EAGLE Powertec PC/NC 2060 - MultiProg Powertec technology programming on PC/NC - Powertec Easy Burn rapid programming - Powertec Handheld – multifunctional hand control device - Manual EDM with Powertec Handheld - High Speed Jump max. 18 m/min - Generator output: 60 Ampere, EAGLE Powertec Gtsdpfx Abjykn Ngo Ssw - Travel range (X, Y, Z): 550 x 850 x 450 mm - Electrode changer: 20-position pick-up rotary changer - Work tank (W x D x H): 800 x 1100 x 480 mm - Work table (W x D): 760 x 1000 mm - Load capacity: 2,000 kg Accessories: - CO2 fire suppression system - Integrated cartridge filter system Special Equipment: - Linear measuring system on all axes (standard on Z-axis in this series)

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2013, X ašies eiga: 550 mm, Y ašies eiga: 850 mm, Z ašies eigos atstumas: 450 mm, ruošinio svoris (maks.): 2 000 kg, stalo plotis: 760 mm, atstumo iki veleno lentelė: 585 mm, stalo ilgis: 1 000 mm, ruošinio ilgis (maks.): 1 095 mm, ruošinio plotis (maks.): 795 mm, ruošinio aukštis (maks.): 480 mm, bendras svoris: 6 800 kg, paskutinio kapitalinio remonto metai: 2025, stalo apkrova: 2 000 kg, greitasis eiga Z ašyje: 18 m/min, Įranga: dokumentacija / vadovas, OPS INGERSOLL GANTRY EAGLE 800 Refurbished Year of manufacture: 2013 EAGLE Powertec PC/NC control 3060 22" display with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control device Manual EDM with Powertec Handheld EAGLE Powertec - Finish Generator PT 60, 60 Ampere High Speed Jump max. 18,000 mm/min. Gtsdpfx Aoyi Uaieb Sow Travel ranges (X, Y, Z): 550 x 850 x 450 mm Distance table/electrode holder min. 135 mm / max. 585 mm Electrode changer 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Worktable (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Head load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS, Hirschmann or System 3R (per customer request) ECOTEC energy saving function standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Gamybos metai: 2008, būklė: naudotas, mašinos/transporto priemonės numeris: 575415, Svoris: 6.700 kg, įvairi periferinė įranga, valdymas, 1 tvarkymo sistema OPS INGERSOLL IMC 5, pagaminimo metai: 2008, serijos Nr.: 583080, svoris: 1.800 kg, 1 aušinimo agregatas M.T.A. TAE EVO M10, pagaminimo metai: 2012, 1 gaisro gesinimo įranga KRAFT & BAUER FB 703 Gsdpjyidk Ijfx Ab Sjtw

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, OPS Ingersoll Gantry Eagle 800 gamybos metai: 2011 darbo valandos: 1703 Eagle Powertec valdymas X,Y,Z: 550 x 850 x 450 mm Tvirtinimo plokštė: 760 x 1000 mm Maks. svoris: 2000 kg Gtodpfx Abjxiwz Uj Ssw EROWA laikiklis Panardinama darbo vonia C ašis Aušintuvas (chiller) Gaisro gesinimo sistema Nuotolinio valdymo pultas 20 elektrodų keitiklis generatorius 60 amp įsk. dielektriką (apie 700 litrų) įsk. matuoklį įsk. matuoklis ant stalo įsk. magnetas 400 x 200 mm įsk. spinta su priedais įsk. dokumentacija Įrenginys prijungtas prie elektros inspektavimui

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1999, veikimo valandos: 80 000 h, mašinos/transporto priemonės numeris: 571718,

Būklė: naudotas, Gamybos metai: 2004, mašinos/transporto priemonės numeris: 575259, X ašies eiga: 550 mm, Y ašies eiga: 850 mm, Z ašies eigos atstumas: 450 mm, For sale is a high-quality die-sinking EDM machine from the renowned manufacturer OPS Ingersoll. This machine is ideally suited for precision EDM work in tool and mold making, and comes with comprehensive equipment. 🔍 General Information: - Manufacturer: OPS Ingersoll - Model: Gantry 800 - Machine No.: 575259 - Year of manufacture: 2004 - Origin: Made in Germany - Condition: Used, well-maintained, and fully operational Gtodew Ig A Hepfx Ab Sow ⚙️ Technical Data: - Travel paths (X/Y/Z): 550 x 850 x 450 mm - Worktable size: approx. 800 x 1000 mm - Max. head load: 200 kg - Max. clearance: 585 mm - Max. traverse speed: 12,000 mm/min 💡 Features & Equipment: - 30-position tool changer, EROWA - Mitsubishi 64-bit CNC control (separate control panel) - Programming software: MultiProg - Control technology: Multipulse PRO - Collet chuck: ER-016841 - Integrated CO₂ fire extinguishing system - Cartridge filter system - Dielectric cooling unit from Weinreich Industriekühlung - Comprehensive accessories and connection cables included ⚡ Electrical Data (as per nameplate): - Power supply: 400 V / 3~ / 50 Hz - Control voltage: 24 V AC / DC - Connected load: 17 A - Fuse protection: 25 A - Circuit diagram no.: 107258 Errors, misprints and prior sale excepted.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 575650, X ašies eiga: 550 mm, Y ašies eiga: 850 mm, Z ašies eigos atstumas: 450 mm, TECHNICAL DETAILS Version: Tank with lifting function Internal dimensions (W x D x H): 800 x 1100 x 480 mm Programmable/automatic dielectric fluid height: max. 450 mm WORKING HEAD At ram clamping system UPC/H8000/Dynafix: 150 kg Min. distance electrode clamping system to worktable: 135 mm Max. distance electrode clamping system to worktable: 585 mm INTEGRATED C-AXIS Adjustable rotational speed: 1 - 20 rpm Measuring resolution: 0.001 degree Gedsw T Thmjpfx Ab Setw Load capacity (manual electrode change): 50 kg Load capacity (automatic electrode change): 15 kg Holding/clamping torque: 120 Nm Max. moment of inertia of electrode: 0.4 kgm² WORKTABLE Support surface (W x D): 760 x 1000 mm Load capacity: 2,000 kg TRAVEL PATHS X / Y / Z (within working tank): 550 x 850 x 450 mm Y (for electrode change and loading position): 1180 mm CONTROL PC-NC dialogue: 2 x 32 bit Drive type: digital AC servo motors Max. travel speed X, Y, Z: 5,000 mm/min High speed jump max.: 18,000 mm/min MACHINE DETAILS Main voltage: 400 V / 50 Hz Control voltage: 24 VDC Maximum fuse: 32 A Power consumption: 19 kVA Machine weight: 6,400 kg Main dimensions (W x H x D) with generator: 2760 x 2730 x 2940 mm Space required with generator: 9 m² Generator weight: 640 kg Operating hours: 3,221 h