CNC automatinės tekinimo staklės

INDEX C100

Sąlyga: geras (naudotas), Gamybos metai: 2014, Steuerung FANUC 31i-B Hauptspindel Stangendurchlass 42 mm Hauptspindeldrehzahl 7000 U/min Hauptspindelmotor 29/25 kW Hauptspindel C-Achse 0,0001 Grad Gegenspindel Stangendurchlass 42 mm Gegenspindeldrehzahl 7000 U/min Gegenspindelmotor 19/16,5 kW Gegenspindel C-Achse 0,0001 Grad Gegenspindelhub 500 mm Gegenspindel Eilgang 60 m/min Revolver 1 Stationen 10 Frässpindeldrehzahl 6000 U/min Fräsmotor 4,2 kW X-Achse Verfahrweg 70 mm X-Achse Eilgang 30 m/min Z-Achse Verfahrweg 250 mm Z-Achse Eilgang 60 m/min Y-Achse Verfahrweg 70 mm Y-Achse Eilgang 15 m/min Iajdpfox H R Rtjx Af Ijl Revolver 2 Stationen 10 Frässpindeldrehzahl 6000 U/min Fräsmotor 4,2 kW X-Achse Verfahrweg 70 mm X-Achse Eilgang 30 m/min Z-Achse Verfahrweg 400 mm Z-Achse Eilgang 60 m/min Y-Achse Verfahrweg 70 mm Y-Achse Eilgang 15 m/min Revolver 3 Stationen 10 Frässpindeldrehzahl 6000 U/min Fräsmotor 4,2 kW X-Achse Verfahrweg 125 mm X-Achse Eilgang 30 m/min Aufstellung Stellfläche 7612 x 1530 mm Gewicht 5500 kg Elektrik 57 kW, 68 kVA, 97 A, 400 V, 50/60 Hz Zubehör Portal-Werkstückaustrag, Werkstückförderband, Späneförderer, Hochdruckkühlmittelanlage, Betriebsanleitungen, Werkzeugüberwachung, UNIMAG-Schnittstelle, Iemca Boss 552-HD Stangenlademagazin, Hainbuch Spannzangenfutter an Hauptspindel montiert, 3-Backenfutter an Gegenspindel montiert.

Sąlyga: naudotas, Gamybos metai: 2012, Technical details: Iajdovivx Njpfx Af Iel Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Number of tool stations: 35 Approx. machine weight: 3.3 t Space requirements (approx.): 2.11 x 1.2 x 1.89 m Used CNC sliding and fixed headstock turning/milling center with B-axis, Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, up to 5-axis simultaneous machining B-axis: freely programmable from 0°–130° Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: main and counter spindle Number of linear slides: 2 Total number of tool stations: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding head and fixed head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear carriage with Y-axis Cross drilling at the rear Chip conveyor Fire extinguishing system FMB Minimag 20 bar feeder, year 2012 Approx. 7,200 operating hours

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, IEMCA BOSS 545 E TECHNINIAI DUOMENYS - Velenų skaičius: 2 - Ašių skaičius: 10 - Revolverinių galvų skaičius: 3 Iaedpfx Asx Iikhsf Iel PAGRINDINIS VELENAS - Veleno antgalis: A2-5 - Veleno pavara: 22/29 [kW] - Veleno greitis: 7.000 [aps./min.] - Maksimalus strypo skersmuo: 42 [mm] - Maksimalus pagrindinio veleno skersmuo: 110 [mm] - Minimali C ašies raiška: 0,001 [laipsnių] KONTRAVELENAS ELEKTROS TIEKIMAS - Maitinimo įtampa: 400 [V] - Bendra galia: 68 [kVA] SVORIS IR IŠMATAVIMAI - Reikalinga vieta: 5540 x 2910 [mm] - Staklių svoris: 5.500 [kg] DARBO VALANDOS

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, veikimo valandos: 44 600 h, Funkcionalumas: visiškai funkcionalus, 1,0 vnt naudota dviejų komponentų liejimo mašina su robotu Iodpou E E H Sofx Af Isal Gamintojas: ARBURG Tipas: 570S2200-400/170e² Metai: 2010 Uždarymo jėga: 220 tonų Kolonų atstumas: 570 x 570 mm Montavimo aukštis min./maks.: 350 mm Atidarymo eiga: 1.000 mm Sraigtas DN 1: 35 mm Didž. įpurškimo tūris: 154 cm³ Liejinio svoris: 141 g/PS Sraigtas DN 2: 30 mm Įpurškimo tūris: 59 cm³ Liejinio svoris: 47 g/PS Valdymas: SELGOCIA Įranga: 3 x šerdžių trauktuvai Vertikali įpurškimo sekcija 6 ašių robotas, gamintojas: KUKA, tipas: KR 16 Wikut, metai: 2010 Konvejeris Apsauginė tvora

Sąlyga: naudotas, TECHNICAL SPECIFICATIONS - Number of axes: 7 - Number of spindles: 2 Iaodpfx Aeuha U Hef Isl MAIN SPINDLE - Max. bar diameter: 25.4 [mm] - Max. machining length: 195 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 8.2 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 25.4 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 8.2 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 5,000 [rpm] TOOL HOLDER 2 - Number of positions: 8 SUB MACHINING - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 7,500 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 2,912 x 1,300 [mm] - Machine height: 1,720 [mm] - Machine weight: 2,400 [kg] MACHINE HOURS - Power-on hours: 44,140 [hrs] - Operating hours: 28,118 [hrs] - Spindle hours: 15,281 [hrs] EQUIPMENT - CNC control: Fanuc 31i-B - 3-color status light tower - Driven tool motorization at: S11, S51 - Powered guide bushing - Part catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank: KNOLL KF 200/1200 * with high-pressure pump - Bar feeder: Tornos Robobar SBF 326 - Fire extinguishing system * NB: Functionality not guaranteed. Must be checked by a qualified company appointed by the buyer.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 14 500 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 11779, tekėjimo ilgis: 700 mm, tekėjimo skersmuo: 250 mm, ašies variklio galia: 26 000 W, veleno greitis (min.): 3 200 aps./min, veleno greitis (maks.): 3 200 aps./min, veleno skylė: 65 mm, bendras svoris: 8 500 kg, incl. 2x Hainbuch/Ortlieb chucks, conveyor belt, swiveling touch probe with 2 heads MANUAL GUIDE_dialog programming high-pressure pump 18 bar/20 l/min SBS tool breakage monitoring, wear control Machine year: 2013 – Commissioned: 05/2014 good & well-maintained condition original purchase price approx. €300,000 Isdpfx Ajrdy Uqof Isal !!! ATTENTION -> Sale without loader!!!

Sąlyga: naudotas, New diesel generator set, generator, emergency power unit RTE Model 50kVA – identical to DAEWOO DAGFS 50 New, unused, year of manufacture 2025 Rated power 50 kVA Continuous power max. 40 kVA Standby power 55 kVA / 44 kW Rated current 33 amps Voltage 400/230 volts, 50 Hz / 230 volts, 50 Hz Fuel consumption 99-liter tank capacity for up to 8.5 hours of operation at 75% load Fuel consumption at 75% load approx. 11 liters/hour Fuel consumption in standby approx. 4 liters/hour Drive engine 4-cylinder in-line diesel engine RICARDO ZH4105ZD Engine output at 1500 rpm: 45 kW Engine output at 1800 rpm: 55 kW Iajdpfxsxlkq Us Af Iel Displacement 1500 cc Tank capacity 99 liters - Simple and compact design with sound-insulated metal enclosure - Forklift pockets for easy and safe transport by forklift - 3x CEE 16 amp sockets (3-pin, 230 V) - 1x CEE 16 amp socket (5-pin, 400 V) - Terminal strip for cable connection for external consumers, e.g., construction site power distributors - ATS module for mains backup operation, for automatic emergency power switching in the event of a power failure Space requirements L x W x H: 2150 x 950 x 1200 mm Weight: 900 kg Unopened stock machine

Sąlyga: geras (naudotas), Gamybos metai: 2006, veikimo valandos: 119 571 h, X ašies eiga: 650 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 500 mm, greitas poslinkis X ašimi: 45 000 m/min, greitas poslinkis Y ašis: 45 000 m/min, greitasis eiga Z ašyje: 45 000 m/min, valdiklio modelis: Siemens 840 D, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Hermle C30 U Siemens 840D Mašinos įjungimo laikas: 119571 h, veleno įjungimo laikas: 56792 h - HSK-A63 veržlė, 10 000 aps./min - 32 įrankių vietos - Apvalusis stalas SRT 280 mm su integruota spaudimo sistema HSK100 (jei nereikalinga, gali būti uždaryta arba perkonstruota kaip nulinės padėties spaudimo sistema) - Išorinė aušinimo skysčio tiekimo sistema - Vidinė aušinimo skysčio tiekimo sistema su popierine juostine filtra, 80 bar - Drožlių nuplovimo pistoletas - Drožlių transporteris - Rankinis valdymo modulis - Automatinės kabinos durys - 32 įrankių vietos + dar 87 papildomos vietos ZM87 - Šiluminė kompensacija - BLUM įrankių matavimo sistema (Wange) Iedpfx Afexcp Srj Ioal - Renishaw matavimo zondas - Drožlių konteineris - Būklės indikatorius Mašina buvo visiškai patikrinta, yra geometrijos protokolas ir apskritimo bandymo matavimai. Mašiną bet kada galima apžiūrėti ir išbandyti įjungtą. Labai gerai prižiūrėta būklė.

Sąlyga: naudotas, Gamybos metai: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6 / 3.5 m Photos show identical machine with centre height 225 mm Base machine: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Standard equipment: - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - B-axis infinitely variable, high-resolution - Marposs measuring system for tool measurement - Active longitudinal positioning - GAP control on T1 and T2 by ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO, integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt driven Options available at extra cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm with integrated GAP sensor (lead time applies) - CNC-controlled C-axis - Non-circular (polygon) grinding - Hydrostatic lead screw in X - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical overhaul: - Complete machine overhauled in accordance with Kellenberger test protocol - New easy-maintenance enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDER CONTROL with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic license and various optional modules depending on the machine’s equipment. Basic software features: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal cylindrical oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zero setting - Wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressing units - Corrections - Z-position measurement (probe required) - GAP contact (touching device required) OPTIONS available at extra cost: Profile plunge grinding software: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single- and multi-start external and internal thread grinding with profile dressed on the wheel Iasdpfx Ajuxfucjf Iol - Dressing of single- and multi-rib wheels - Flank angle freely selectable Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-round plunge grinding: - External and internal non-round oscillation grinding Non-round grinding software: Precondition for non-round grinding is equipping the workpiece spindle with a high-resolution rotary encoder to enable operation as a C-axis. The non-round...

Gamybos metai: 2011, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Boschert Tool Grinding Machine EASY SHARP Equipped for Trumpf tool system (Amada system optional) Machine for punch tool maintenance with cooling system and particularly powerful motor, therefore also suitable for use with diamond grinding wheels. Used machine is currently being overhauled Configuration for Trumpf tool system up to size III Iedpfxoid I T Is Af Ieal Accessories: Tool holder for flat and Whisper-style punches Die holders for sizes I, II, and III New corundum grinding wheel Diamond dresser Overhauled cooling system and machine base frame Technical data: Grinding wheel diameter: 175 mm Height adjustment: 150 mm Working area: 400 x 150 mm Motor power: 2.2 kW Motor speed: 2,825 rpm Optional: adapters for Amada system available Images similar