CNC tekinimo staklės

Index B 400

Sąlyga: naudotas, Gamybos metai: 2023, Techniniai duomenys: Sukimosi skersmuo: 770 mm Sukimosi skersmuo virš suporto: 650 mm Sukimo ilgis: 750 mm Didžiausias ruošinio pralaidumas: 82 mm y ašis: +/- 60 mm Revolverinė galva (x padėčių): 12 VDI 40 Sukimosi greitis: 4.000 aps./min Atraminė plokštelė: taip Bendras galios poreikis: 47 kVA Staklių svoris apie: 7,8 t Užimamas plotas apie: 3,3 x 1,9 x 2,3 m Priedai: Pagrindinio veleno galia 16 / 24 kW CNC tekinimo staklės, NC atraminė plokštelė, C ašis su stabdžiu, Varomieji įrankiai, įrankio pavaros galia 10,5 kW, greitis 5.400 aps./min, 3 žandikaulių griebtuvas SCHUNK ROTA THW 260-81, Drožlių transporterio konvejeris, Aliejaus rūko ištraukimo paruošimas, Detalės išleidimas (dešinėje), Aušinimo sistema 300 l, 8/20 bar, Priedai (8 varomieji įrankiai...) apie 3.000 darbo valandų Gjdpexhd Ufefx Abdeil

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 13 116 h, Max. bar capacity mm 20 Max. Z-axis travel sliding headstock/short turning mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations quantity 8 Driven tools quantity 8 Max. speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 B-axis swivel angle degrees 105 Lower turret Tool stations quantity 8 Driven tools quantity 8 Max. speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Backworking unit Tool stations quantity 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Holder diameter mm 25 Sub spindle Max. spindle bore mm 20 Max. speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Gijdpfowuddvsx Abdol Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant system base unit Pump pressure bar 3 / 8 Tank capacity l 250 Pump rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions Length x Width x Height mm see layout plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Sąlyga: naujas, Išmatavimai (I-P-A): 1860x595x150 mm Svoris: 125 kg Stalčių skaičius: 10 vnt. Įrankių vežimėlis, ilgis 158 cm. Suoliukas su 10 stalčių, durimis ir galine sienele. Bendri išmatavimai visiškai uždaryto komplekto: 186 x 59,5 x 149 cm. Tik įrankių vežimėlio matmenys su ratais ir rankenomis: 186 x 56 x 94,5 cm. Atviros nišos už kairiųjų durelių matmenys: 40 x 52 x 54 cm. Dešinės pusės 4 viršutinių stalčių matmenys: 36,5 x 50 x 7 cm. 5-ojo dešinės pusės stalčiaus matmenys: 36,5 x 50 x 31,5 cm. Kairės pusės viršutinio stalčiaus matmenys: 100 x 50 x 10,5 cm. Kairės pusės 2-ojo ir 3-iojo stalčių matmenys: 61,5 x 50 x 7 cm. Kairės pusės 4-ojo ir 5-ojo stalčių matmenys: 61,5 x 50 x 15 cm. Maksimali ratų apkrova: 175 kg kiekvienam ratui (iš viso 1050 kg). Giodpfxou Imlbo Abdsl Maksimali apkrova vienam stalčiui: 30 kg. Savas svoris: apie 125 kg Pakuotės išmatavimai: 167 x 66 x 106 cm.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2013, veikimo valandos: 7 100 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 650 mm, sukimosi skersmuo virš skersinio stumduko: 350 mm, tekėjimo skersmuo: 385 mm, veleno greitis (min.): 4 500 aps./min, veleno skylė: 67 mm, X ašies eiga: 255 mm, Z ašies eigos atstumas: 800 mm, For sale: Used DMG NEF400 V3 5th Generation ISM 2-Axis Universal Lathe with C-Axis. Travel distances: - X: 255 mm - Z: 800 mm - Swing diameter over bed: 385 mm - Maximum workpiece diameter: 350 mm - Turning length: 650 mm Equipment: - Main spindle as integrated spindle motor - Max. spindle speed: 4,500 rpm - Drive power: 8.0/11.5 kW (100/40% duty cycle) - 12-position disc turret VDI30 with 6 driven positions - C-axis and spindle brake (hydraulic) - Automatic tailstock, MK4 mount - Travel: 680 mm - CNC control Siemens 840D Solutionline with ERGOline Control, Sinumerik Operate, and Shop Turn 3G - Operating system: Linux - Technology cycle for alternating spindle speed in vibration-critical clamping applications - Manual tool measurement device in the work area - Hydraulic unit - Coolant spray gun - Mechanical oil mist separator - Reinforced coolant pump 12 bar, 23 l/min - Chip conveyor, discharge height 1,250 mm, discharging to the right Long bar machining package, including: - Workpiece pick-up device with conveyor belt discharging to the left for parts up to max. 65 mm diameter, 150 mm length, and max. weight 3 kg Gedpfxoxzqnro Abdeil - Hollow clamping device, draw tube internal diameter max. 67 mm - Interface for bar loader - Foot pedal for tailstock operation - Hydraulic 3-jaw chuck SMW-AUTOBLOK with RMS sensor (Relocation Machine Security) Machine is immediately available! Machine is ready for operation! Loading will be arranged by us! Transport can be organized upon request!

Sąlyga: geras (naudotas), Gamybos metai: 2015, Stroji je v dobrem stanju, deli, ki so prikazani ročno, niso vključeni. X 1025 mm Y 560 mm Z 600 mm Heidenhain TNC 620, Gijdpfx Abjwx N Nfsdol 16.000 min⁻¹ HSK 63

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, CNC Twin-Spindle Turning Center Control: CNC path control incl. 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and ShopTurn 3 G TECHNICAL DATA Maximum turning diameter: 340 mm Spindle distance: 1470 mm Turning length: 1135 mm Swing diameter over bed: 700 mm Swing diameter up to tool turret 2: 540 mm Travel paths: X1 – Tool turret I: 270 mm Y1 – Tool turret I: 120 mm Z1 – Tool turret I: 1200 mm X2 – Tool turret II: 195 mm Y2 – Tool turret II: 80 mm Z2 – Tool turret II: 1200 mm X3 – Counter-spindle slide: 180 mm Z3 – Counter-spindle slide: 1200 mm Main Spindle Integrated spindle motor ISM 102 Drive power (100/40% duty cycle): 40/48 kW Giedpfxowcd S Nj Abdol Torque (100/40% duty cycle): 570/680 Nm Speed range: 0-4000 rpm Bar diameter: 102 mm Draw tube inner diameter: 104 mm C-axis and spindle brake (angular resolution): 0.001° Counter Spindle Integrated spindle motor ISM 76 Drive power (100/40% duty cycle): 25/32 kW Torque (100/40% duty cycle): 280/380 Nm Speed range: 0-5000 rpm Bar diameter: 65/75 mm C-axis (angular resolution): 0.001° Slide 1 Tool turret (direct drive) Number of tools: 12 Tool holder diameter VDI (DIN 69880): 40 mm Max. power (100/40% duty cycle): 10.9/14.2 kW Max. torque (100/40% duty cycle): 26/34 Nm Speed range: 40–10000 rpm Slide 2 Tool turret (direct drive) Number of tools: 12 Tool holder diameter VDI (DIN 69880): 40 mm Max. power (100/40% duty cycle): 10.9/14.2 kW Max. torque (100/40% duty cycle): 26/34 Nm Speed range: 40–10000 rpm Slide 3 Rapid traverse speed X-/Z-axis: 30/45 m/min Tool resolution Z-axis: 0.001° Feed force (40% duty cycle) X-/Z-axis: 16/13 kN EQUIPMENT/ACCESSORIES  Short bar loader IRCO ILS-RBK 100/16  Various main spindle reduction tubes  NC-controlled workpiece unloader from both main and counter spindle The unit consists of NC-controlled * horizontal axis * swivel unit * vertical axis * 2-jaw gripper for interchangeable gripper jaws  Conveyor belt for removing workpieces from the machine  Coolant system 8/20 bar with immersion cooler  Chip conveyor  Oil mist extraction  Control cabinet cooling unit (up to 40°)  Counter-spindle slide  Easy-Tool Monitor  1 collet chuck for quick-change chuck size 100 for main spindle  1 collet chuck for quick-change chuck size 100, Nova AxisFix for counter spindle  Approx. 40 various quick-change chucks size 100 (total stock)  Change device, pneumatic ø 100 mm  Approx. 50 various tool holders, stationary and driven (total stock)  Mounting elements  Documentation

Sąlyga: naudotas, Gamybos metai: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Number of tool stations: 35 Approx. machine weight: 3.3 t Space requirements (approx.): 2.11 x 1.2 x 1.89 m Giedpfjvivx Njx Abdel Used CNC sliding and fixed headstock turning/milling center with B-axis, Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, up to 5-axis simultaneous machining B-axis: freely programmable from 0°–130° Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: main and counter spindle Number of linear slides: 2 Total number of tool stations: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding head and fixed head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear carriage with Y-axis Cross drilling at the rear Chip conveyor Fire extinguishing system FMB Minimag 20 bar feeder, year 2012 Approx. 7,200 operating hours

Sąlyga: naudotas, Gamybos metai: 2006, Technical Details: Maximum bending angle: 75° Working height: 850 mm Operating voltage: 380 V Machine weight approx.: 1.0 t Machine dimensions (LxWxH): 1.9 x 2.6 x 1.0 m Transport dimensions: 2.6 x 1.8 x 1.0 m Single and double bending of reinforcing steel possible. Number of bending formers: 2 units Bending angles: 40°; 60°; 75° Bar diameter: Single bend = Ø 12–50 mm, Double bend = Ø 12–35 mm Operation via control panel with touch screen Bending table: - Ø 480 mm Gjdpfx Absu Ibu Redeil - Rotational speed: 7.5 / 15 rpm - Bending pin hole: Ø 48 mm (16 positions) - Center pin: Ø 50 x 94 mm Counter-holder bars: - 2 units, length = 840 mm - Manual travel adjustment: 100 mm - 13 holes, size Ø 48 mm Accessories: Bending attachments: 2x Ø 60 mm; 2x Ø 78 mm; 1x Ø 96 mm; 1x Ø 122 mm; 1x Ø 160 mm; 1x Ø 200 mm 1x pin for table 8x counter-holders, various shapes 1x bending tray

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, Main spindle Speed: 3,000 rpm Power: 11 kW Torque: 320 Nm Chuck diameter: 260 mm Spindle bore: 65 mm Spindle nose: A2-6'' Working area Centre distance: 1,500 mm Centre height: 290 mm Gedpfxsup Slbj Abdjil Swing over bed: 570 mm Swing over cross slide: 510 mm Tool system Turret: PARAT 4-position turret head RD 3 Tailstock Type: manual Centre: MT-4 (live) Equipment Chip management: chip tray Coolant supply: coolant pump 7 bar

Sąlyga: naudotas, Gamybos metai: 2019, x-axis travel: 3,400 mm y-axis travel: 3,400 mm z-axis travel: 1,600 mm Control: CELOS 840D sl Op Siemens Max. spindle speed: 20 - 15,000 rpm Drive power - main spindle: 52 / 42 kW Tool holder: HSK-A100 Max. torque: 404 / 280 Nm Swivel range B: -30° / +180° Table dimensions: 2,500 x 2,000 mm Max. table load: 10,000 kg Table rotation speed: 5 rpm Distance spindle center to table (horizontal): 130 - 1,730 mm Distance spindle center to table (vertical): 230 - 1,830 mm Distance spindle nose to table (horizontal): -1,500 - 1,900 mm Distance spindle nose to table (vertical): -1,600 - 1,800 mm Type: 5x rotary / wheel Number of tool stations: 303 positions Max. tool diameter: 110 mm Max. tool diameter with vacant adjacent stations: 280 mm Max. tool length: 900 mm Max. tool weight: 45 kg Tool change time: 7.5 sec Tool holder: HSK-A100 Rapid traverse (X/Y/Z): 60 / 30 / 40 m/min Total power requirement: 140 kVA Machine weight approx.: 106 t Space requirements approx.: 14.0 x 13.0 x 7.0 m 5-axis CNC universal large machining center DMG MORI - DMC 340 U - Pallet changer, 2 positions - Precision package - MDynamics package Gsdpfx Aox H Tt Debdsil (Improved surface finish with reduced machining time) - Only approx. 10,500 spindle hours - Taper cleaning station with rotating brushes - Balluff tool identification system - Machine protection via quick shutoff (MPC) - Laminated safety glass window - Machine version for pit installation - Heidenhain linear scales (instead of Magnescale) - Camera remote system with monitor at the control panel