IMA BIMA/300/125/530 4 ašių CNC apdirbimo centras (2012)

IMA BIMA/300/125/530

Būklė: naudotas, Gamybos metai: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of Units and Accessories (Basic) The structure of the machine base is a monolithic construction made of thick-walled steel. It is reinforced through the entire machine bed with welded triangular plates, providing exceptionally high stability. The triangular shape with a wide base used for supporting parts is the key to ensuring long-lasting precision and stability. The design of the machine allows the user to maintain an optimal workflow, even with minimal space requirements. This machine base offers the processing unit a balanced and secure foundation with excellent load distribution. The mobile unit carrier, designed as a gantry, is constructed as a solid monoblock. It is positioned in the X-direction on prismatically ground rails using recirculating ball carriages. The machining unit is again mounted on the mobile carrier on prismatically ground rails and recirculating ball carriage. Axis movement: The drive system in the Y and Z axes is via ground recirculating ball screws of the highest precision class. The drive in the X axis is via a backlash-free, preloaded precision rack-and-pinion drive. This ensures balanced load distribution during the positioning process. Such a characteristic is crucial to ensure smooth movement, even during more complex operations. The movement of the various axes is achieved by brushless AC servomotors. These provide excellent positioning speeds due to very short ramp-up times. Additionally, the measurement systems are fully integrated into these motors. These features make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (Basic) · Vacuum pump: 100 m³/h · Power: 2.5 kW · Max. vacuum (connection) 0.9 bar Control / Control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRICAL/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC provides the NC control system with an unparalleled level of user familiarity: the software runs on Windows XP, allowing fast and easy programming that can be learned quickly, even by inexperienced users. The system is open and allows the connection of a CD-ROM drive, sound card, barcode reader, modem, printer, scanning systems, etc. Furthermore, installation of all commercially available network systems as well as any CAD programs available on the market is possible. To save space, the control cabinet is placed under the machine table, and the operator works at a separate wheeled terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the chosen plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax help for drilling and milling operations - Parametric programming to perform the same panel machining on different Hnedjvvi Rfjpfx Am Tou

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1997, Max. workpiece length: 3600 mm, max. workpiece width: 1400 mm, length: 8750 mm, width: 5250 mm. Hnodeqvnl Tepfx Am Teu

Būklė: naudotas, Gamybos metai: 2000, SCM Tech 99L apdirbimo centras Hsdpfetxdqcex Am Tjnu Pagaminimo metai: 2000 Matmenys ir svoris transportavimui: 4800 x 230 mm, aukštis 260 mm, svoris 2800 kg.

Būklė: naudotas, Gamybos metai: 2007, Working area: 2780 x 1140 mm (vertical milling), 2500 x 950 mm (horizontal drilling). Travel path X-Y: 2980 x 1271 mm. Z-axis traverse: 200 mm. Clearance height: 180 mm. The main body structure is a monolithic design made of thick-walled steel. It is reinforced throughout the machine bed with welded-in triangular plates, making it extremely stable. The triangular shape with a broad base, used for load-bearing parts, is the key to ensuring sustained precision and stability. The machine layout allows the operator to optimize workflow with a minimal footprint. This main body provides the processing unit with a balanced and secure foundation, featuring outstanding load distribution. The moving aggregate carrier is manufactured as a solid monoblock. It is positioned in the X-direction on ground, prismatic linear guides using recirculating ball carriages. The working unit is also mounted on these ground prismatic guides and ball carriages on the mobile aggregate carrier. Description of aggregates and basic accessories: Drilling unit: Drilling head with 10 + 4 spindles • 6 individually selectable vertical spindles in X • 4 individually selectable vertical spindles in Y • 2 horizontal spindles in X (1+1) • 2 horizontal spindles in Y (1+1) • Speed: 4,000 rpm • Power: 2.2 kW • Pitch: 32 mm • Chuck: M10 with 11 mm seating • Extraction nozzle: D = 160 mm Vertical milling unit (Position 2): • Tool holder HSK 63F • Speed: 1,500 – 24,000 rpm, stepless via inverter • Motor power: 4.4 kW (6 HP) at 12,000 rpm (S1) • CW/CCW rotation • Ceramic bearings • Scope of delivery: 4x tool holders (right) without collet Tool changer: • Side-mounted 7-position tool magazine (TR7), fully enclosed against chip projection Hodpfx Aox Twdyjm Tsnu • 7 tool slots for HSK 63F tool holders in a row • Max. tool diameter D = 120 mm • Max. weight per tool holder 4.5 kg • Max. total tool weight 20 kg (TR7) • Angular gear units can be accommodated Horizontal milling unit (Position 1): Horizontal unit with two opposed outputs for milling and grooving. • Speed: 9,000 – 18,000 rpm, stepless via inverter • 1 output for collet 3-20 mm (ER32) • 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) • Motor power: 3 kW (4 HP) • Max. front milling tool diameter: 20 mm • Max. front milling tool length: 110 mm • Max. rear milling tool diameter: 12 mm • Max. rear milling tool length: 80 mm • Max. saw blade diameter: 100 mm • Saw blade bore (ER32): 50 mm • Saw blade arbor diameter (ER20): 12 mm Worktable: The worktable is designed to guarantee the operator maximum freedom of movement. The quick-release vacuum clamping system ensures maximum flexibility with precise positioning and optimal holding of workpieces. • 4 supports, 900 mm, steplessly adjustable manually along X • 8 round vacuum cups, D = 110 mm, steplessly adjustable in Y (2 per support) • 2 stops in X (1 left / 1 right) • 1 stop in Y per support (total 6) • Retractable reference stops are CNC controlled • Supplied: 4 plug-in adapters for suction cups • Pendulum processing as standard (2 working zones) Axis motion: The drive system in X, Y and Z directions uses ground recirculating ball screws of the highest precision class. The ball screw for the X-axis is positioned precisely at the center line...

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1993, mašinos/transporto priemonės numeris: 869/9-302, Funkcionalumas: visiškai funkcionalus, Connected load 380V 21A Edge magazine Gluing station 1906 Pressure unit 1914 Cross-cut saw unit 1976 Rounding milling unit 1943 Rounding scraper 1927 Buffing unit 1944 Control panel (top-mounted) Extraction port D=100 mm Operating manual No interchangeable unit for flush trimming Hjdpfxoiamufo Am Tsnu

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 3 000 h, ašių skaičius: 5, įrankių magazino lizdų skaičius: 24, Siūlome šį naują, puikiai prižiūrėtą, 5 ašių CNC tekinimo centrą COSMEC CONQUEST 515, pagamintą 2021 m. Šis įrenginys vis dar naudojamas gamyboje, veikia viena pamaina, jį galima apžiūrėti ir išbandyti, kai jis prijungtas prie elektros. – Galime surengti mokymus / instruktavimą jūsų darbuotojams mūsų įmonėje prieš išmontuojant įrenginį. – Pagaminimo metai: 2021, pradėtas eksploatuoti: 2021 m. 05 mėn. – Darbinis stalas: 4000 mm x 1500 mm – OSAI valdymo sistema – 24 vietų įrankių keitiklis (2 diskai, kiekviename po 12 įrankių) – Portalo aukštis: 500 mm – 5 ašių griebtuvas, 18 kW, 500–24 000 aps./min. – NC valdomas ištraukiamasis gaubtas – Apsauginė sistema su buferiu – Valdymo spinta su kondicionieriumi – Judrus valdymo pultas – Centrinė tepimo sistema – Vakuuminis siurblys, 250 m³/val. Hjdpozukursfx Am Tsnu – Apytiksliai 24 vnt. HSK63F įrankių laikiklių – Automatinis įrankių ilgio matavimas – Nesting stalas – Nesting CNC tekinimo centras – Galima atlikti pakaitinę apdirbimą Kaina nurodyta „iš sandėlio“. Mes mielai padėsime išmontuoti ir pakrauti įrenginį. Panašus į „Reichenbacher Vision“ arba „Homag CNC“. Jei turite klausimų arba norite susitarti dėl apžiūros, galite susisiekti su manimi telefonu arba el. paštu.

Būklė: nepatikrintas (naudotas), Gamybos metai: 1997, SCM Compact 23 K obliavimo staklės Aprašymas Špindelių seka: apačia-dešinė-kairė-viršus Įleidimo stalo ilgis: 2500 mm Maks. darbinis plotis: 230 mm Maks. darbinis aukštis: 120 mm Pasiuntimo greitis: 6-12 m/min Hjdowc A R Depfx Am Tonu Špindelio greitis: 6 000 aps./min. 400 Volt 50Hz CE (Visi pakeitimai, techninių duomenų, informacijos ir kainų klaidos galimi. Pasiūlymo galiojimas priklauso nuo ankstesnio pardavimo. Nėra garantijos dėl spausdintos informacijos!) Geriausios medienos apdirbimo staklės iš Nyderlandų

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, used CNC machining center Manufacturer: IMA Model: BIMA 300 125/430 Year of manufacture: 2008 4-axis CNC machining center with console table 8 manually adjustable supports along the X axis, 3 vacuum cups per console, vacuum pump 90 m³/h vacuum connection for templates Hjdpfxey Nzw Ne Am Tonu LED display for cup position indication Working area X: 200 – 4300 mm Working area Y: 0 – 1400 mm (milling/drilling), Working area Z: 12 – 125 mm (clearance 150 mm) Additional center stop row 14 vertical drilling spindles + 6 horizontal Horizontal drilling and groove saw unit, swiveling 90° Milling spindle 7.5 kW up to 18,000 rpm with C-axis, 360° interpolation, liquid circulation cooling – 18-position tool changer mounted on Y-support, traveling Edgebanding unit VT 100, 4-sided/all-around – rotation range 740 degrees With double roll magazine, automatic granulate feed Adapter attachments: – Fixed 90° saw – 4-spindle cross head Control: ICOS open 231 with 17″ TFT UPS ImaWop 10.0 incl. MDE and production list software Safety fence on the right side and safety mats in front; Rear: wall installation or separate safety required

Būklė: geras (naudotas), Gamybos metai: 2000, • Sanding width (mm): 1350 • Workpiece thickness (mm): 3 - 150 • Total number of sanding units: 2 • Longitudinal belt: 2 • Contact roller diameter = 200 mm: 1 /15 kW • Combination unit: with small roller • Cleaning brush: 1 x diameter = 120 mm • Vacuum table • Intermediate lacquer sanding • Constant table height • Carpet cleaning • Longitudinal unit, motor: 15 kW, 1.8 - 18 m/s • Feed speed: 3 - 12 m/min • Sanding belt length, longitudinal unit (mm): 2,100 x 1,400 • Pressure beam: CSD system, electromagnetic, wear-free • Conveyor belt: new • Availability: inspected, in stock Hnsdewwlm Dspfx Am Tsu

Būklė: geras (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm Hnjdpfxox Rdn Ts Am Tou 1 Longitudinal sanding unit (with contact roller for calibration work (steel)), diameter: 250 mm Belt speeds: approx. 18 m/s, 22 kW Non-wearing brake unit, automatic length adjustment Dust extraction device controlled in relation to the workpiece, counter-rotating abrasive belt, abrasive belt grit compensation managed by computer Belt speeds: 1.0 - 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Drive: 15 kW Incl. continuously variable sanding speed adjustment via electronic frequency controller, connected to double row of extraction ports for dust removal device. Non-wearing brake unit, automatic length adjustment of potentially different edge lengths of the abrasive belt, dust extraction device controlled depending on the workpiece, disconnectable, counter-rotating abrasive belt. 2 pressure beams with selective pressure adjustment system CSD® system Continuously variable adjustment of the pressure for individual pressure elements, for both single and multiple feed. Spacing: 32 mm. Tolerance compensation for workpieces up to 2 m via maintenance-free pressure magnets. Working width and sanding start/end of the pressure beam are set electronically. The pressure elements are actuated by lifting electromagnets, enabling continuous variation of the force on each sanding pad as the workpiece passes through the machine. This innovative CSD® technology always guarantees a proportionally equal pressure relative to the pad's overlap on the workpiece. The risk of breakthrough on edges is almost completely eliminated by this dynamic, continuously regulated pressure control.