Mobilusis „Klimaanlge ohne Abluftschlauch“

IKG 6,7 KW / 4,5 KW

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested to H3, residual dust content less than 0.1 mg/m³ High extraction performance with a small footprint Maximum power in this class Very quiet Application Area: Kdjdpfx Agocnw U Dsfsi Clean air extraction units for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with a matching extraction port diameter Can also be used for several dust sources High-quality, well-conceived construction Robust and compact housing made of galvanized sheet metal Extraction port can be easily converted from left to right, allowing for flexible use Large access openings for maintenance Large, mobile chip containers with clamping lever and chip collection bag Unit delivered fully assembled, ready for immediate use Mobile Filter Description: Ultra-compact with maximum filter surface area Filter media made of polyester fleece, aluminum vapor-coated, washable for extended service life Filters are standard in antistatic design, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning light on control panel The fan is positioned downstream of the filter Equipment Features: With innovative locking device for safe container positioning All units in this series are dust-tested to H3, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Access opening for cleaning the bypass filter Connection cable 5 m with 5-pin CEE plug and phase inverter 2 fixed casters and 2 swivel casters with brakes Pre-wired for connecting machine recognition for up to 8 machines and slide valve controls Manual filter cleaning Sound pressure damper available as an accessory Model: RLA 125 M Article No.: 5131256 Technical Data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Rated airflow: 1095 m³/h Max. airflow: Negative pressure at rated airflow: Filter surface: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Būklė: geras (naudotas), Air cooler, cold storage, refrigerated container, cold room Kjdpfx Ageb Nx Hmofsdi - Equipped with: 4x fans - Cooling capacity: 70 kW - Air flow rate: 39,673 m³/h - Surface area: 348 m² - Fin spacing: 10 mm - Fan diameter: 500 mm - Fin spacing: 10 mm - Casing: stainless steel - Drip tray - Quantity: 2 units available - Price: per unit - Dimensions: 4550/1100/H940 mm - Weight: 600 kg/unit

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, veikimo valandos: 14 500 h, Funkcionalumas: visiškai funkcionalus, 1 used two-component injection moulding machine with robot and rotary table Manufacturer: ARBURG Model: 470S1100-400/290 Year of manufacture: 2017 Clamping force: 110 tons Tie bar spacing: 420 x 420 mm Minimum/maximum mould height: 450 mm Opening stroke: 950 mm Screw diameter 1: 35 mm Max. shot volume: 154 cm³ Shot weight: 141 g/PS Screw diameter 2: 30 mm Shot volume: 106 cm³ Shot weight: 97 g/PS Control system: SELGOCIA Features: - 3 core pulls Kodeu E E Suopfx Agfsdi - Vertical injection unit - Rotary table - 6-axis robot, Manufacturer: KUKA, Model: KR 16 Wikut, Year: 2010 - Conveyor belt - Safety fence

Būklė: naudotas, Gamybos metai: 2010, Column-mounted slewing crane: mobile Jib length approx. 2,500 mm Machine weight approx. 4 t Load capacity 125 kg Bucket dead weight 430 kg Minimum bucket fill weight 416 kg Minimum total bucket weight 846 kg Max. wheel load 391 kg Max. support load 544 kg Without documentation/papers. Kdjdpfxomt Rpwe Agfoi

Gamybos metai: 2026, būklė: naujas, The AL-KO Sanding Table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table product range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested in Accordance with BGI 739-1” seal. This makes it suitable for hand sanding tasks as well as for processing workpieces using handheld machines. The sanding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to its funnel-shaped design with an integrated air duct, the airflow is precisely guided towards the extraction port. Depending on the required extraction performance, the unit can be connected to the on-site extraction system via a Ø 140 mm or Ø 160 mm connection port. The folded edges along both sides of the work surface allow for face-end working on workpieces. The extraction grates are aerodynamically aligned with the extraction port to ensure optimal extraction results. For cleaning inside the sanding table, the slatted grid can be removed and the air duct can be detached by loosening just a few screws. The sanding table is delivered pre-assembled; only the legs need to be installed and adjusted to the required working height. Your advantages: • Accessible from all four sides • Loadable up to 150 kg • Manual, tool-free height adjustment with scale • Offset side edges for edge sanding • Workpiece-friendly beech slatted grid (removable) • Funnel-shaped air guidance to the extraction port Technical data: Kdjdpfxjfyadbo Agfei • Extraction port: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at port at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working surface (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Gamybos metai: 2022, būklė: beveik kaip naujas (parodų įrenginys), AL-KO Grinding Table AST 1.5 BASIC The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the seal “Wood Dust Tested according to BGI 739-1”. YOUR BENEFITS - Accessible from 4 sides - Load capacity up to 150 kg - Manual, tool-free height adjustment with scale - Offset longitudinal sides for edge sanding - Workpiece-friendly beech wood grate (removable) - Funnel-shaped airflow to extraction nozzle TECHNICAL DATA AST 1.5 BASIC Extraction nozzle: 140 / 160 mm Required extraction capacity: 1,500 m³/h Negative pressure at nozzle at 22 m/s: Kdjdpfx Aodqzhbogfei - 1,000 Pa at DN140 mm - 700 Pa at DN160 mm Adjustable working height: 735-1,015 mm Work surface (W x L): 946 x 1,500 mm Dimensions (W x L): 1,000 x 1,600 mm Weight: approx. 73 kg

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, keliamoji galia: 1 500 kg, Siegmundo M padėties keitiklis puikiai tinka suvirinimo, surinkimo ir techninės priežiūros darbams. Padėties nustatymas atliekamas rankiniu būdu, naudojant rankinį ratą. Padėties keitikliai su keliamąja galia iki 1 500 kg. Sukimo momentas: 900 Nm. Rankinis ratas su Ø 315 mm rankena. U formos kampų suderinamumas: 28 sistema. Maksimalus U formos kampo ilgis: 3 000 mm. A – darbo aukštis: 850 mm. B – kolonos aukštis: 955 mm. C – bendras aukštis: 1 140 mm. D – pagrindo plokštės plotis: 600 mm. E – pagrindo plokštės ilgis: 600 mm. Kaina be 3D priedų. 3D priedų, sunkių ketaus detalių (sienelės storis 28 mm, apdirbtos), visi specialios kainos, naujos: originalūs 28 U formos kampai 500 mm x 200 mm x 200 mm (papildomai 500 €) arba 2 000 mm x 200 mm x 200 mm (papildomai apie 1 000 €), arba 2 400 mm x 200 mm x 200 mm (papildomai 1 300 €), arba su stalo plokšte su 28 mm skylėmis 2 000 mm x 1 000 mm x 200 mm (papildomai 2 000 €). Turime kelis padėties keitiklius. Ksdpfsvlgzaex Agfedi

Gamybos metai: 2022, būklė: beveik kaip naujas (parodų įrenginys), Oro apdorojimo įrenginys su EC technologija salės klimato reguliavimui ar šildymui, vėsinimo galia kartu su šaldytuvu 150 kW prie 7/12°C, šilumos galia 300 kW, oro kiekis 20 000 m³/h, 4x500 mm oro išleidimo angos, kompaktiška konstrukcija. Kdjdofzrgyspfx Agfsi

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: REI 90 / F 90 RFP B 625.30, Pavojingų medžiagų spintos pavojingoms medžiagoms (detalės prieduose) Kdedsxfbfpepfx Agfsi

Būklė: naudotas, Gamybos metai: 1988, Outreach 2,200 mm Kjdpfxeg N Di Rj Agfjdi Hook height 2,600 mm Machine weight approx. 1.8 t Load capacity 1,000 kg +++++ Please note that the machine is currently disassembled and prepared for loading. For this reason, a powered demonstration or production of a video is not possible. Furthermore, our listing contains the most informative photos of the highest possible quality. Unfortunately, it is not possible to provide additional pictures. +++++