Juostinis krautuvas

IEMCA TAL/AUTO 65/32

Būklė: naudotas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 32 mm - Travel path: 240 mm - Spindle speed: 8,000 rpm - Spindle drive power: 7.5 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 32 mm - Spindle speed: 6,000 rpm TOOL HOLDER 1 - Number of positions: 5 TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm FRONT TOOL POST Cedpfx Aouhax Ejn Hehc - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm BACK MACHINING - Number of positions: 7 - Number of driven positions: 3 - Driven tool speed: 6,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Operating hours: 56,433 [h] ACCESSORIES - Control: Fanuc - Drive for powered tools on: S2, S3, S5 V+H - Driven guide bushing - Parts removal - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Number of driven tool holders: 3 - Number of fixed tool holders: 7

Būklė: naudotas, Gamybos metai: 1988, Technical details: Pressure: 10 t Workpiece diameter - max.: 40 mm Thread length: 70-80 mm Workpiece diameter min./max.: 3 / 40 mm Rotational speeds: 47-94 rpm Chedpfxjw D Aq Ts An Hsc Feed rate: 0.5 – 6 mm/s Maximum stroke: 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions: 1.4 x 1.4 x 1.7 (W x D x H) m Hydraulic unit dimensions: 0.8 x 1.2 m Hydraulic drive Manual and automatic cycle Adjustable roller speed Max. thread diameter 40 mm, min. thread diameter 3 mm Up to 3.5 mm pitch, max. pitch 1.75 mm Roller width min. 80 mm, max. 120 mm Spindle speed 47-94 Roller shaft diameter 40 Various rollers included as accessories

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Chedpfew T Tcwox An Hec Customs tariff number: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS 10-axis machine – standard 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 - 2 independent vertical tool posts: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotary spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating axis for back-working: X4, S5 Bar feeder position: on operator's right Machine center height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. part length: - guide bush machining: 180 mm - collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous), 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous), 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotary Collet for guide bush, type: Meister 605 Number of side tool holders, combined - fixed: 2 x 5 - rotary: 3 + 3 Number of front tool holders, combined - fixed: 4 - rotary: 3 Number of rear tool holders, combined - fixed: 3 + 3 - rotary: 3+3 Tool section: 12x12 mm Standard rotary tool holder: ESX 20 Bar feeder: yes Parts catcher: yes All technical data subject to change without notice, errors and omissions excepted.

Būklė: naudotas, Thread rolling machine, cold rolling machine, thread roll machine, profile rolling machine Manufacturer: PEE-WEE Model: UPW 24 Serial no.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool mounting length/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor output: 3 kW Roll drive motor output: approx. 5.5 kW Mains connection: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed in 4 steps via gear shifting - Hydraulic unit integrated in machine bed - Operating manual with electrical schematic diagram Required space (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Cjdpfx Aeuz If Njn Hshc Through-feed rolling: Used when the thread length is greater than the width of the rolling tools. Through-feed tools have three sections – the lead-in, the calibration section, and the lead-out. Groove rolls have no pitch and are swiveled to match the lead angle of the profile to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and swivel angle results in the lead angle in the workpiece.

Būklė: geras (naudotas), Barfeeder LNS Csdpfor Iygijx An Hshc

Būklė: naudotas, Volelių komplektai profilių lenkimo mašinai, 3 volelių žiedų lenkimo HERKULES WETZLAR Voleliai tinka HERKULES WETZLAR BO 238 N tipo profilių lenkimo mašinai Chsdsglaq Iepfx An Hoc Ašies skersmuo: 60 mm su 18 mm pleištu 2 vnt. volelių komplektas Nr.1, volelio skersmuo 110 mm, volelio plotis 180 mm 2 vnt. volelių komplektas Nr.2, volelio skersmuo 160 mm, volelio plotis 40 mm 3 vnt. volelių komplektas Nr.3, volelio skersmuo 150 mm, vamzdžio skersmeniui Ø 33 mm, volelio plotis 87 / 115 mm - 3-čio komplekto voleliai su adapterio žiedu nuo Ø 93 iki Ø 60 mm be pleišto Mašina turėjo 2 varomus volelius Visų volelių svoris 57 kg Gera būklė

Būklė: naujas, Gamybos metai: 2024, keliamoji galia: 300 kg, Welding Positioner KT 300 Load Capacity Horizontal: 300 kg, Tilted: 150 kg Cjdpfx Anec Ug Tlj Hohc Power Supply: 220V, 50 Hz Table Diameter: 450 mm Height: 500 mm Tilt Range: continuously adjustable via geared crank motor 0 - 90° Rotation Speed: 0.3 to 2.5 rpm Incl. foot remote control Optional extra: Quick-action chuck Diameter: 300 mm, €450.-

Gamybos metai: 1980, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 3253-80, Offer 22045 Technical data (approx.): - Pressing force: 10 t - Throat depth: 150 mm - Table size: 520 x 320 mm - Table height adjustment: 160 mm - Clearance hole in table: 165 x 125 mm - Max. installation height: 220 mm - Ram surface: 240 x 150 mm - Pin hole in ram: 30 mm Csdpfx Aektg Dhon Hehc - Ram adjustability: 40 mm - Stroke adjustment: 4 – 60 mm - Strokes per minute: 130 1/min - Hydraulically actuated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive: 380 V / 1.1 kW - Required space (approx.): W 1000 x H 1800 x D 1100 mm - Weight (approx.): 1300 kg

Gamybos metai: 1990, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 3-201065, Maximum material passage in the feed tube: 65 mm Cedjdlm Dhepfx An Hehc for material lengths up to: 3000 mm Feed force steplessly adjustable up to max.: 550 N Loading time approx.: 30 s Electrical connection/power requirement: 380 V / 1.5 kW Space requirement: 5810 x 920 x 1515 mm Weight: 1200 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Max. bar diameter 65 mm Chodpfx Anjin Hkms Hoc Max. bar length 3000 mm