CNC tekinimo staklės

Hyundai Wia KL7000LY

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. Both powerful spindles offer a 66 mm bar passage; two turrets each have 12/24 tool stations with driven tools rated at 14 kW and 12,000 rpm. Y-axis available on both upper and lower turrets. The machine is fitted with a 35-bar high-pressure coolant system including a filtration unit and an additional tank. For further information regarding this lathe, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 cooling unit for coolant – 8000W - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable, automatic parts catcher (pneumatic) - Part remover equipped with a pneumatic gripper for taking out finished workpieces - Pneumatic ejector for sub-spindle with 100 mm adjustable stroke; end position monitored by sensor - Coolant supply through right spindle Kwodpfoxmhdnsx Abrju - Interface for bar feeder (unimag) - Preparation for extraction system, connection flange Ø100 The machine is fitted with a chip conveyor, coolant unit, and tooling package. The machine can be inspected under power and is available immediately. Only operated in single-shift mode. Further information available upon request.

Sąlyga: naudotas, Gamybos metai: 2019, Swing diameter 400 mm Turning length 584 mm Swing over bed 750 mm Control Siemens 828 D Shop Turn Kwedoww Nazopfx Abrou Spindle bore 81 mm Spindle speed: 3500 rpm Spindle drive 18.5/22 kW Spindle torque 410 Nm Number of tools in turret 1: 12 BMT 65 of which driven: 12 BMT 65 Speed of driven tools 5000 rpm Milling spindle drive: MK 5 kW y-axis +/- 60 mm Rapid traverse 30/30/10 m/min Tailstock MK 5 Dimensions (L x W x H) 4.6 x 1.9 x 2.1 m Machine weight approx. 6.65 t Flat-bed CNC lathe with driven tools and Y-axis - 3-jaw chuck Kitagawa Ø 250 mm - Chip conveyor - Parts catcher with box in the door - Signal lamp - 2 + 2 driven tool holders - Various fixed tool holders - Flat guideway - Tool measuring arm - Programmable tailstock - 23 bar coolant system - Enlarged coolant tank 225 l - Double cartridge filter - Coolant spray gun - Dual-pressure clamping

Gamybos metai: 2012, Sąlyga: visiškai atnaujintas (naudotas), MAZAK Laser Cutting System STX510 MkIII 4kW ==TOP CONDITION – REFURBISHED IN 2023== Year of manufacture: 2012 Very well-maintained, refurbished MAZAK laser machine with 4000W Sheet size: 3000mm x 1500mm Kwsdpfx Abenwmw Sjrsu Minimal installation footprint: 2.9m x 7.3m Small parts conveyor belt LAN/USB connectivity Automatic nozzle changer Automatic focal point adjustment Rapid piercing for thick materials Plasma sensor for stainless steel cutting Piercing sensor for entry Burning sensor for monitoring carbon steel cutting Fully enclosed machine cover No foundation required Mild steel (FE): up to 22mm Stainless steel (VA): up to 15mm Aluminium/Magnesium (ALMG): up to 10mm Plastic processing possible Incl. software Incl. warranty Incl. extraction unit Incl. commissioning + training ===Optionally available with fully automatic loading and unloading===

Sąlyga: naujas, Gamybos metai: 2025, veikimo valandos: 671 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 550 mm, Z ašies eigos atstumas: 450 mm, greitas poslinkis X ašimi: 35 m/min, greitas poslinkis Y ašis: 35 m/min, greitasis eiga Z ašyje: 35 m/min, valdiklių gamintojas: Heidenhain, valdiklio modelis: Heidenhain TNC7, ruošinio svoris (maks.): 1 100 kg, stalo plotis: 800 mm, stalo ilgis: 616 mm, sukimosi greitis (min.): 20 aps./min, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Heidenhain TNC7 Velenas HSK-A63 16000 min-1 30 įrankių vietų Standus tvirtinimo stalas 800x616 Kwsdpfeyf E Atex Abrsu Vidinis aušinimo skysčio tiekimas 40 barų su popierinės juostos filtru Grandininis transporterio grandiklis Rankinis ratukas BLUM LC53-Digilog įrankio lūžio / matavimo sistema Matavimo zondas BLUM TC Mašinos veikimo laikas: 671 h Veleno veikimo laikas: 61 h Mašina apie 6 mėnesių senumo. Parduodama pagal kliento užsakymą. Apžiūra įmanoma iš anksto susitarus.

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machining length: 200 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 10 - Number of live tool positions: 5 - Driven tool speed: 5,000 [rpm] FRONT TOOL POST - Number of positions: 4 SUB SIDE MACHINING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 [V] DIMENSIONS AND WEIGHT - Installation space: 2,110 x 1,085 [mm] - Machine height: 1,832 [mm] - Machine weight: 2,200 [kg] MACHINE HOURS - Operating hours: 32,264 [h] EQUIPMENT - Control: Meldas - Driven guide bushing - Parts catcher - Parts conveyor Kwjdpfx Aeuhazgobreu - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: FMB MINIMAG 20

Sąlyga: geras (naudotas), Gamybos metai: 2004, veikimo valandos: 77 711 h, X ašies eiga: 650 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 500 mm, valdiklio modelis: Heidenhain iTNC530, greitasis eiga Z ašyje: 45 000 m/min, greitas poslinkis X ašimi: 45 000 m/min, greitas poslinkis Y ašis: 45 000 m/min, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Hermle C30 U Siemens 840D Mašinos įjungimo laikas: 77711 val. Spindulio įjungimo laikas: 16294 val. - HSK-A63 10000 min-1 velenas - 32 įrankių vietos - SRT 280 mm apvalus stalas su integruota fiksavimo sistema SK50 (jei nereikalinga, galima uždaryti arba perkonstruoti į nulio taško fiksavimo sistemą) - Išorinis aušinimo skysčio padavimas - Vidinis aušinimo skysčio padavimas su popieriniu juostos filtru 80 bar - Drožlių nupūtimo pistoletas - Drožlių transporter - Rankinis valdymo modulis Kedpfx Aboxcp R Ierswu - Automatinės kabinos durys - 32 įrankių vietos plius dar 87 ZM87 vietos - Terminė kompensacija - BLUM įrankių matavimo sistema šone - Renishaw matavimo jutiklis - Drožlių konteineris - Būsenos šviesos indikatorius Mašina visiškai patikrinta, yra geometrijos protokolas ir apskritimo tikslumo bandymų matavimai. Mašiną galima bet kada apžiūrėti ir išbandyti įjungtą. Labai gerai prižiūrėta būklė.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, Hydraulic Double-Column Press 400 T with Sliding Table Press Type: Double-Column Press Thermal Neutral Range: 80 – 120 °C Number of Operator Sides: 1 side Forces: - Maximum Pressing Force: 4000 kN - Maximum Uplift Force: 400 kN - Pressure Build-Up Time (Closed Tool, Steel on Steel): Max. 4 seconds Kodpfxjph Uk Nj Abrewu Dimensions: - Length: 3,800 mm - Width: 4,475 mm - Maximum Opening Width: 800 mm - Stroke: 800 mm - Table Height above Floor: 1,100 mm - Total Height above Floor (Construction Height): approx. 4,300 mm - Minimum Hall Height: 5,500 mm Parallelism Deviation at 20°C: +/- 0.1 mm Deflection: - Determined at maximum closing force with 70% utilization:

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 415 mm, tekėjimo ilgis: 850 mm, tekėjimo skersmuo: 390 mm, veleno skylė: 105 mm, veleno greitis (maks.): 2 000 aps./min, X ašies eiga: 225 mm, Z ašies eigos atstumas: 950 mm, greitas poslinkis X ašimi: 15 m/min, greitasis eiga Z ašyje: 15 m/min, bendras aukštis: 1 980 mm, bendras ilgis: 4 600 mm, bendras plotis: 1 900 mm, quill skersmuo: 100 mm, plunksnos brūkšnys: 120 mm, bendras svoris: 7 000 kg, strypo praėjimas: 90 mm, įvorės išorinis skersmuo: 300 mm, valdiklių gamintojas: Siemens, valdiklio modelis: 828D + Shopturn, Įranga: dokumentacija / vadovas, max. turning diameter: 390 mm Z-axis travel: 950 mm max. spindle speed: 2,000 rpm Kwodpfx Aefk Et Aobreu AC spindle motor SIEMENS (cont./15min): 25/33 kW bar capacity: 90 mm spindle nose: A2-11 Including accessories, among others: SAUTER 12-station turret VDI-40 Trifix interface for driven tools C-axis with spindle clamp and stabilization wide and sturdy flat guides 45° slant bed for optimal chip flow hinged belt chip conveyor with chip bin 3-jaw Kitagawa power chuck ø 300 mm manual swing-type tool measurement hydraulic tailstock manually adjustable with programmable quill coolant system with high-performance pump (4 bar) Rittal filter fan on control cabinet

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 000 mm, Y ašies eiga: 1 700 mm, Z ašies eigos atstumas: 1 500 mm, Heidenhain 530 Įstrižinė frezavimo galva su 2,5° x 2,5° indeksavimu Sūkių skaičius iki 6 000 aps./min Įrankio tvirtinimas SK50 Kjdpjx I A Hvjfx Abrowu Vidinis aušinimas 36 bar Drožlių transporteris išilgai ir skersai

Sąlyga: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0728, X = 5,000 mm Y = 1,025 mm Z = 1,100 mm / horizontal Z = 1,000 mm / vertical - NC swiveling head continuously adjustable +/- 105 degrees as a CNC axis for horizontal and vertical machining, indexing accuracy +/- 5 arcseconds - Heidenhain iTNC530 control, hard disk with approx. 21 gigabytes available for user data - Motor spindle HSK100, speed range 20-8,000 rpm, drive power 44 kW, 350 Nm - NC rotary table SKH 4/630 Faceplate horizontal Faceplate diameter 630 mm Standard overall height 300 mm Indexing accuracy +/- 12 arcseconds Maximum load 900 kg Max. tangential torque at 63 bar: 2400 Nm Including motor (AC) with integrated rotary measuring system and hydraulic clamping, incl. additional CNC axis - NC rotary table SKH-NC 9/1450 Faceplate horizontal Faceplate diameter 1450 mm Indexing accuracy +/- 12 arcseconds Without direct measuring system Maximum load 5,000 kg Max. tangential torque with clamping: 16,000 Nm Including motor (AC) with integrated rotary measuring system and hydraulic clamping, incl. additional CNC axis Special enclosure for rotary table diameter 1450 mm included Swing diameter 1500 mm No turning operation possible! Kwsdpfxjxgnfxs Abrsu - 60 tool stations - Fully enclosed work area with roof - Bellows with steel lamellae - Direct measuring system for NC rotary table Indexing accuracy +/- 5 degrees - Direct linear measuring systems X, Y, Z axes - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting, 6-fold - Installation elements - 3D probing system with wireless connection - Tool probing system for measuring and checking cutting tools in the machine, TT140 - Zero-point clamping system Unilok ESM 130 36 pcs integrated in the machine table 16 pcs integrated in rotary table faceplate with diameter 1450 mm 4 pcs integrated in rotary table faceplate with diameter 630 mm