Apdirbimo centras

Hundegger SPM-2

Gamybos metai: 2011, būklė: beveik kaip naujas (naudotas), For sale is 1 roller conveyor including one geared motor each: Technical data: Year of manufacture: 2011 Length: 12.75 m Djdpfx Afoihpn Nofeup Width: 1.40 m Height: 1.00 m Load capacity: up to 4 tons Geared motor per conveyor: SEW-EURODRIVE R87 DREE90L4 (for more details, please refer to the type plate in the photo) Three out of four roller conveyors are equipped with a continuous wooden side wall along the entire length, while one conveyor features a lateral wooden wall over a length of 5.20 m. Two out of the four conveyors are each fitted with 3 lateral removal systems. (see pictures)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 500 h, Funkcionalumas: visiškai funkcionalus, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain after the finger-jointing press, foldable - Drying paternoster approx. 7 m, for board lengths up to 6 m - Cut-off and zero saw - Conveyor belt for residual wood disposal - Stacking system Dsdpowclkyefx Affsup - Batten magazine not for sale - Package cross conveyor The machine is in very good condition, with very few operating hours. Machine is still assembled, but available immediately.

Būklė: geras (naudotas), Gamybos metai: 1989, Pressing area: 2550 x 1350 mm Number of pressing cylinders: 6 Total pressing force: 140 t Opening width: approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz Duedpfxewd N Rms Affjp Total connected load: approx. 26 kW Required space (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic Heated Platen Press Under-piston design Electric heating platens Press pressure infinitely adjustable via pressure switch device Hydraulic pump Central control panel with all controls Digital temperature display for both heating platens Press cycle counter Safety ripcord Rack compensation Main switch Used Machinery Notice: • Technical data may be subject to errors and prior sale. • Prices quoted are ex-works - free loading! • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty claims whatsoever. Buyers have the opportunity to inspect the machines on site. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Būklė: naudotas, Gamybos metai: 2010, Chalet Construction Machine Dusdpfxevwfqqo Affop Used, good condition, low operating hours Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 CE type tested Up to 140 mm round timber corner joints Saw: 1x Drilling: 1x Milling: 3x Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Gamybos metai: 2005, būklė: naudotas, HIT mechanisation for KVH and BSH production for components up to width 600 mm, height 300 mm, length 18 m Dedpfspiurmsx Affoup consisting of various parts available individually or as a complete package - Layer cross pusher - Various cross conveyors - Workpiece roller conveyors - Heavy-duty roller conveyors - 5 lifting tables each mounted with 2 cross conveyors on transfer trolleys - Stacking machine - Control cabinets - Roller tracks - Travelling timber crosscut saw with waste disposal

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Nanxing NCG3021L(LL) este un centru de prelucrare CNC nesting de înaltă performanță, proiectat pentru tăiere, găurire, frezare și etichetare a pieselor într-un flux de lucru complet automatizat. Acest model integrează sisteme automate de încărcare, descărcare și etichetare, combinând automatizarea, inteligența și producția bazată pe IT. Portul deschis permite conectarea cu software de proiectare mobilier și ERP, asigurând o prelucrare a panourilor complet optimizată. Djdoxcwnbopfx Affsup Software-ul profesional de optimizare FCC crește eficiența tăierii, reduce risipa și susține managementul integrat al producției. Această utilaj este soluția ideală pentru fabricarea inteligentă a mobilierului, reducând costurile de manoperă fără a compromite acuratețea sau productivitatea. Caracteristici principale - Sistem automat de încărcare și descărcare cu masă de ridicare 3 tone, dispozitiv de pre-push și perdele de siguranță - Sistem rotativ de etichetare cu imprimantă Honeywell – etichetarea și prelucrarea se realizează simultan - Masă de vacuum (3100×2150 mm), împărțită în 10 secțiuni pentru o priză vacuum uniformă și puternică - Două pompe de vacuum de 7.5 kW fiecare (cu ulei), pentru aspirație maximă și nivel de zgomot redus - Rigiditate ridicată a portalului – asigură precizia și stabilitatea pe termen lung chiar și la viteze mari - Electromandrină principală italiană 12 kW (HSK-63F, ATC, 24.000 rpm) cu suflare de aer internă și externă pentru evacuarea perfectă a prafului - Schimbător automat de scule (ATC) cu 12 poziții – optimizează timpul și permite operații complexe - Cap de găurire cu 21 de axe pentru găurire verticală și orizontală - Sistem automat de ungere pentru întreținere redusă și durată de viață extinsă - Sistem de aspirare praf cu puncte de extracție față și spate pentru un mediu de lucru mai curat - Design orientat spre siguranță: gard de protecție complet și barieră optică (opțional) - Sistem de control SYNTEC CNC, interfață intuitivă, compatibil cu fișiere MPR, DXF, TCN, NC Specificații tehnice - Zonă de lucru: X: 3100 mm / Y: 2150 mm / Z: 50 mm - Înălțimea mesei de lucru: 1010 mm - Viteză max. de deplasare: X/Y 70 m/min, Z 20 m/min - Electromandrină principală: 12 kW, HSK-63F, 24.000 rpm - Schimbător de scule: ATC cu 12 poziții, servocontrolat - Cap de găurire: 21 axuri verticale, 2,5 kW, 4000 rpm, max. diametru găurire Ø 35 mm - Capacitate pompe vacuum: 2×7.5 kW, 250 m³/h - Putere totală instalată: 47 kW - Dimensiuni utilaj: 13.800 × 3.950 × 2.600 mm - Greutate: 6.000 kg - Alimentare: 380V / 50Hz / 3 faze Aplicații - Producție mobilă din panouri (bucătării, dressing-uri, mobilier birou) - Tăiere și găurire nesting pentru MDF, PAL, placaj - Linii automate cu etichetare pentru fabrici inteligente Industry 4.0 Avantaje - Soluție completă: încărcare, nesting, găurire, frezare, etichetare și descărcare – toate automatizate - Eficiență ridicată: optimizare software + sincronizare duală portal pentru dublarea vitezei de procesare - Reducere forță de muncă: operator minim necesar - Ideal pentru producția de serie: calitate stabilă, precisă și constantă.

Būklė: geras (naudotas), Manufacturer: MBT Model: MV-250 S Motor: 5.5 kW Hopper size: 780 x 600 mm Unit dimensions: 3500 x 1000 x 2200 mm Dsdpfx Afohzr U Isfeup

Gamybos metai: 2011, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Finger jointing line for cross-sections up to 200 cm² (80/240 mm or 100/200 mm), with the following components: 1. HOWIAL Tilt Destacking Unit - SH/4t - 1.75x1.75x6.00m - 4t – minimum length 2.50 m, semi-automatic package separation. For tilting wood stacks up to 45°. Electrically driven. Maximum stack dimensions 1.75 x 1.75 x 6.00 m, max. stack load 4 t, shortest wood length 2.5 m. 2. HOWIAL Lamella Separator VE 1 for cross-cut saw. With pneumatically controlled fingers for material marked after defect detection, deposited on the underlying roller conveyor. 3. HOWIAL Grading Roller Conveyor RO-1 Digital wood moisture measurement, control and registration system for the automatic detection and control of wood moisture using the electrical resistance method in a cycle-based process. 4. Gann DMT-8 Digital wood moisture measurement, control and registration system for the automatic detection and control of wood moisture using the electrical resistance method in a cycle-based process. System integrated in a large control cabinet, complete with inkjet printer. 5. HOWIAL Cross-Cut Saw AS-30 B Pneumatically controlled under-table cross-cut saw with 2 automatic feed units, automatic cross-cutting. Special photoelectric cell control for detection of fluorescent marking lines. Automatic waste detection possible. Saw motor power 7.5 kW Saw blade diameter 700 mm Feed drive approx. 2 x 1.5 kW Air pressure 8 bar Feed speed max. approx. 60 m/min 6. HOWIAL Conveyor Belt for Cut-Off Waste, with studded belt and guide plates Belt width 350 mm Belt length 2000 mm Belt speed 0.4 m/sec 7. HOWIAL Double Roller Conveyor RO-2, 6.00 m long Incl. cross transfer, equipment for the finger jointing automation. Driven by round belts, all rollers driven. Cross removal via chain conveyor. Ejector ± moisture, right side. Adjustable transport speed 100 m/min. Length approx. 6.00 m Roller width approx. 400 mm Diameter 112 mm 8. Compact Finger Jointing Machine Cook Bolinder Technical data as per Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Infeed length from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Pressing force 5 - 22 tons Spindle diameter 50 mm Finger profile 15/15 Spindle speed approx. 6000 rpm Total connected electrical load approx. 62 kW Machine weight approx. 9 tons. OEST comb gluing system for PU adhesives Modern Telemechanique PLC control. Dsdpfx Afei Ezx Djfsup 9. HOWIAL Roller Conveyor with De-stacking Driven roller conveyor with automatic ejector and hydraulically operated de-stacking arms. Technical data: H: 920 mm L: approx. 12,000 mm 10. Safety Fencing including safety switches 11. Finger Joint Testing Machine BSPLT-100 Testing machine for finger joint bending test according to DIN 1052-1/A1 and EN 385. Support distances freely adjustable, integrated measuring scale, automatic calculation of support distances in software. Fully automatic test sequence via mouse click on PC (not included). Alternatively, test sequence can be triggered from control panel. Connects to any standard PC or laptop (Win 2000/XP) using provided RS232 serial cable. Fully automatic data acquisition and test report generation in MS Excel with graphical presentation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. pressing force: < 100 kN Max. support length: 2100 mm Measurement accuracy WITHOUT DISASSEMBLY

Gamybos metai: 2026, būklė: naujas, Fully Automatic Horizontal Packaging Machine SPINNER 1800s Application: Packaging, grouping, and protection of long or bulky products such as furniture, doors, wooden panels, etc. Operator Side: - Infeed direction right General Technical Data: - Main motor power: 3 kW - Max. ring speed: 40 rpm - Min. ring speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 1600 kg Standard Equipment: - Powered conveyor (infeed and outfeed) for automatic product feeding - Adjustable ring speed - Adjustable stretch tension with mechanical brake system Dedofzrhdepfx Affjup - Automatic stretch clamping and cutting system - Photo cell for automatic start of wrapping process - Touch screen for adapting machine parameters to product requirements - Operator safety systems Optional Equipment: - Various types of conveyors - Infeed and discharge rollers - Air cushion unit Technical Features: Wrapping sizes: - Max. length: unlimited - Min. length (WxHxL): 600 x 450 x 1200 mm Conveyor Features: - Usable length: 2300 mm - Total length: 2450 mm - Working height: 950 mm - Electric motor power: 0.55 kW - Max. speed: 10 m/sec - Max. loading capacity: 100 kg/m Stretch Film Specifications: - Max. width: 250 mm - Max. outer diameter: 230 mm - Core diameter: 76 mm - Recommended material thickness: 23, 30, 35 micron

Būklė: geras (naudotas), Gamybos metai: 2011, Fully automatic timber infeed with feed roller conveyor Extension of cross conveyor and feed roller conveyor for timber lengths up to 13 m Infeed and loading cross conveyor Under-table swing cut-off saw Universal 4-axis milling unit (UF4) Combination support for vertically operated tools Drilling unit 2.2 kW Combination support for horizontally operated tools Drilling unit 2.2 kW Longitudinal and cross groove milling machine Dedewuppwspfx Affjup Rear marking device (on the stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand operation system" Electronic control with EKP software Roller conveyor for timber outfeed incl. extension (without drive) Component ejector 5-arm timber deposit rack Safety devices and protective guards