Dailidės staklės / Hundegger K2-4-450

Hundegger K2-4-450

Sąlyga: geras (naudotas), Gamybos metai: 2011, Fully automatic timber infeed with feed roller conveyor Extension of cross conveyor and feed roller conveyor for timber lengths up to 13 m Infeed and loading cross conveyor Under-table swing cut-off saw Universal 4-axis milling unit (UF4) Combination support for vertically operated tools Drilling unit 2.2 kW Combination support for horizontally operated tools Drilling unit 2.2 kW Iedpfjwuppwex Af Ietb Longitudinal and cross groove milling machine Rear marking device (on the stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand operation system" Electronic control with EKP software Roller conveyor for timber outfeed incl. extension (without drive) Component ejector 5-arm timber deposit rack Safety devices and protective guards

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Holtec pakuočių atpjovimo pjūklas Vario Cut su Holtec mechanizacija. Jörg Elektronik. Visiškas atliekų pašalinimas po pjovimo linija. Iedpow Smz Defx Af Ietb

Sąlyga: naudotas, Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, pjovimo plotis (maks.): 625 mm, Hundegger joinery machine with automation 5 axes Working width: 625 mm with tools Itsdpfx Aev Ubtcjf Ieb

Sąlyga: naujas, AGRE ALUP ALLEGRO 14+ 13 270 Variable speed. Space-saving. Cost-effective. Efficient 1:1 direct drive. Simple operation. Low energy consumption. High performance. Suitable for a wide range of applications. Itodpfx Aeixt I Hsf Ieb Superior compressed air quality. Cyclone separator and refrigerated dryer integrated. Detailed equipment: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor, with 1:1 direct drive Control: Variable speed control with frequency inverter Controller: Graphic controller C55DD Refrigerated dryer: Integrated, refrigerant R513A Filtration: including cyclone separator Tank: horizontal, painted Performance data: Free air delivery at operating pressure 7.0 bar = 0.26–2.26 m³/min Operating pressure min. / max.: 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load: 16.2 kW Motor rated power: 15 kW Oil quantity: 5.2 l Dimensions and weight: L x W x H = 1655 x 655 x 1550 mm Weight: 400 kg Compressed air outlet: G 3/4'' Compressed air receiver capacity: 270 l

Sąlyga: naudotas, Working width: 1350 mm Number of sanding units: 2 pcs. Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER HP: 0.75 Iodpfjrmucxjx Af Ijtb - Variable speed drive for feed carpet, continuously adjustable SPEED m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS; rubber-coated - EMERGENCY STOP STRIP at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 pcs. ROLLER TABLES with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED CARPET - 1 EXTRACTION PORT with 160 mm diameter - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system: 1. Without valves 2. Without photoelectric barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system operates continuously without lateral belt run-off! - Unitek steel calibration roller (same for all models) - Unitek flexible pressure pad before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set with 6 positions (per piece – same for all models) - Unitek electronically segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor power up to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller table with 4 rollers (same for all models) - Price per roller table - Unitek electronic control of machine functions with 12" touchscreen (same for all models) Automatic workpiece scanning with feed control --- Machine price in above configuration upon request! --- Options at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): €8,390.00 Freight costs: €1,300.00 Assembly and instruction: €1,300.00 --- All prices stated are net prices plus statutory VAT (19%) --- (Technical data as per manufacturer – subject to change and errors excluded!)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, veikimo valandos: 47 600 h, mašinos/transporto priemonės numeris: 325, System: TX8H Spindle bore: 80 mm Maximum turning length: 750 mm Turning diameter: 340 mm Power: 22 kW Number of tool holders: 12 Shank diameter: 40 mm Driven tools at all positions X-axis Itodpfjh Dzqlsx Af Isb Z-axis C-axis Automatic tailstock Chip conveyor

Sąlyga: naudotas, Gamybos metai: 2001, Dry-type distribution transformer 630 kVA, manufacturer TESAR Italy, voltage ratio 10000 (±2 x 2.5%) / 400 V, Dyn5-11-1, IP23 or IP00, forced ventilation AF, Al/Al windings, temperature monitoring unit, fully functional, very good condition, 2 units available Ijdpfsquwtxex Af Istb

Sąlyga: naudotas, Planer and moulder Weinig Hydromat 2000 for four-sided planing and profiling of timber with groove bed, without soundproof cabin. Spindles: 5 Spindle 1: Bottom / 7.5 kW Spindle 2: Right / 7.5 kW Spindle 3: Left / 11 kW Spindle 4: Bottom / 11 kW Itjdpfx Aermvhfjf Isb Spindle 5: Top / 15 kW Working width: 230 mm Working height: 160 mm Spindle diameter: 50 mm

Sąlyga: naudotas, Gamybos metai: 2010, Chalet Construction Machine Used, good condition, low operating hours Manufacturer: Krüsi Model: CMI 40 Ijdpfx Afsvwfqqe Ietb Year of manufacture: 2010 CE type tested Up to 140 mm round timber corner joints Saw: 1x Drilling: 1x Milling: 3x Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, veikimo valandos: 1 h, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 9 100 mm, bendras plotis: 3 600 mm, Mūsų įmonė gamina įrenginius ir sistemas namų prefabikacijos gamykloms. Gaminame stacionarius surinkimo stalus, sukamus stalus, „drugelio“ stalus ir pilnas gamybos linijas. Siūlome naują surinkimo stalą, kurio matmenys 3,6 m x 9,0 m. Iodpjvv Rv Aofx Af Ietb - Konstrukcija padengta milteliniais dažais - Stalo paviršius dengtas faneros plokšte su smūgiams atsparia danga - Angos SD-01 spaudimo cilindro montavimui - Išimami ir reguliuojami ribojimo kaiščiai - Modulinė konstrukcija savarankiškam surinkimui (vienoje paletėje) - Mažos transportavimo išlaidos visoje Europoje