HSM VK 88 + Stadler KF1800

HSM VK 8818

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 20 331 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 970 mm, pildymo angos ilgis: 1 800 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 750 kg, bendras svoris: 33 000 kg, Good day, We hereby offer you, without obligation, a used, complete bale press line consisting of a baler from HSM, type VK 8818 R-FU including conveyor technology and wire feed stations. The following technical data have been taken from the manufacturer's operating manual and brochures, for the accuracy and completeness of which we cannot accept any liability. Technical data – press: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Pressing force, main press: 1000 kN Specific pressing force: 120 N/cm² Pressing force, shearing edge ejector: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm; variable length, 600 up to 2000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights at a bale length of approx. 1.2 m: 650 – 750 kg/bale, depending on material Hydraulic oil tank capacity: 2,000 L HVI 46 PLC control: Siemens S7-300 Lasdpfoyz Af Ejx Akhec Operator panel: Siemens TP 700 Overall press dimensions assembled: 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions (press with conveyor system): 35,000 x 8,480 x 7,745 mm (L x W x H) Weight of the press: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Special equipment ordered additionally: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard drive (2 x 45 kW) with identical output performance Manual switching on/off of the number of wire ties to save strapping wire on non-expansive materials Shearing edge ejector with 121 kN pressing force Sensor-based wire monitoring with press shutdown in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the press: The entire press line (baler and conveyor system) is in good, immediately operational condition. The system was cleaned weekly by the operator, lubricated and serviced as specified by the manufacturer. Technical data – chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feed belt length: 7,000 mm Incline belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: HSM VK 8818 R-FU baler Maintenance platform Bale chute Wire feed stations Wire roll trolleys (without wire rolls) Stadler chain belt conveyor KF 1800 Transverse sliding belt conveyor Pit cover from feed conveyor to pit Second control cabinet for press operation at the conveyor Machine documentation in English Delivery time: The entire line is already dismantled, stored, and can be loaded at short notice after receipt of payment. We would be pleased if this or one of our other baling presses is of interest to you. Your Service Team Mertens & Frowein GmbH

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, A SIG Corpoplast blow molding machine is available. Output: 21,600 bottles/hour, bottle formats: 500ml/750ml/1000ml/1500ml, max. blow air pressure: 40 bar, dimensions (L/W/H): approx. 7000mm/4300mm/3100mm, weight: approx. 20,000 kg. Includes Transver AG preform feeder, year of manufacture: 2008, silo, elevator, sorter, and chute. Documentation available. An on-site inspection is possible. Laedpfxjt Eu Azs Akhjc

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, Technical Data: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Idle throughput (theoretical): 643 m³/h Capacity at 50 kg/m³ (theoretical): 32.15 t/h Feed opening width x length: 970 x 1,800 mm Bale width x height x length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with matching shaft covers - 1 carrier and maintenance platform for conveyor and hopper - 1 STADLER feeder - 1 HSM VK8818 R FU (100 t) automatic channel baler - 1 wire stand for 500-kg soft wire spools - 10 wire spool carts - 1 multi-function control system for the baler - Complete construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning upon request. Weight: 33,000 kg Ledpfx Asygud Aokhoac Binding type: wire Processable materials: plastic film, mixed paper, cardboard, HDPE/LDPE hollow containers, and plastic bottles The plant is currently in operation and can be inspected during ongoing business. The machine will be dismantled on 16/02 and can be inspected at our site after that. Available immediately!

Būklė: geras (naudotas), Gamybos metai: 2011, veikimo valandos: 40 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 88 t, pildymo angos plotis: 990 mm, pildymo angos ilgis: 1 800 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, bendras svoris: 23 000 kg, alyvos bako talpa: 2 000 l, galia: 90 kW (122,37 AG), tūrio srautas: 643 m³/val, Good day, We hereby offer you, without obligation, a used baler including conveyor belt, wire tying stations, and bale chute, manufactured by HSM GmbH + Co. KG, model VK 8818 FU. The following technical data has been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we provide no guarantee. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours, as of July 2025 Main press force: 880 kN Specific press force: 107 N/cm² Chamber feed opening: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale size: 1,100 x 750 mm, length variable from 600 to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions – press with conveying technology: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used at a recycling facility for compaction of paper, cardboard, and film. The press is in good condition and will be replaced by a new, larger baler in May/June 2026. Until then, the machine can be inspected under working conditions with material throughput. We would be pleased if this baler is of interest to you. Ljdpsymmtcofx Akhjac Your service team at Mertens & Frowein GmbH

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2008, - Mašina labai geros techninės ir vizualinės būklės - Prieinama iš karto - Pardavimas apima: Ledpfx Akey Dc Nvsheac - Metalo žirklės: Zato FCE40 arba Genesis GXP400R - Strėlė - Papildomi priedai prieinami už papildomą mokestį

Būklė: naudotas, Gamybos metai: 1992, Automatinė PET butelių pūtimo mašina Gamintojas: SIDEL Tipas: SBO 4 S1 Laodpfx Akjwa Rhrehoc Metai: 1992 Našumas: 4 000 (1,5 L / 2 L buteliams) Įdiegta galia: 150 kW Komplekte 1,5 L formos Preformų padavėjas Techninė būklė: naudota mašina, įsijungia, programa veikia gerai

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 8 900 h, mašinos/transporto priemonės numeris: LP50VH2, Used Presona LP50 VH2 baler in good operating condition with conveyor belt Technical Data: LP 50VH2 - Theoretical volume capacity: 730 m³/h - Maximum volume output under load: 340 m³/h - Productivity at bulk density: - 30 kg/m³ = 7-9 t/h - 50 kg/m³ = 8-9 t/h - 100 kg/m³ = 11-14 t/h - Hopper length: 1,500 mm - Hopper width: 1,100 mm - Charging chamber volume: 2.7 m³ - Bale width: 1,100 mm Lodpeyrhi Njfx Akheac - Bale height: 720 mm - Bale length: adjustable - Bale weight: 400–550 kg - Number of vertical tying wires: 5 pcs. - Pressing force: 50 t - Specific pressure: 63 N/cm² - Max. hydraulic pressure: 250 N/cm² - Oil tank capacity: 600 l - Electric motor power 400 V, 50 Hz: 1 × 45 kW - Oil cooler: 1 × 1.5 kW - Net weight approx.: 16 t - Year of manufacture: 2014 2) Feed Conveyor - Conveyor type: chain conveyor - Year of manufacture: 2014 - Specifications: - Conveyor width: approx. 1,300 mm - Length of horizontal section: 5,500 mm - Length of inclined section: approx. 10,800 mm - Conveyor weight: approx. 6 t Scope of delivery: Press, control cabinet, operator panel, conveyor belt for sale. Complete documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection possible by appointment. We do not accept any liability for technical information or possible errors. Video material can be provided upon request.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, galia: 261 kW (354,86 AG), Lindner Urraco U75 D Ledpeytdkfefx Akheac ant ratų ašies su magnetu ir nuotolinio valdymo pultu generalinis remontas Įrankiai: 6 vnt. 7/7 disko Hammel dizainas (būklė 85%) iš viso 9800 darbo valandų 2024: įdiegta nauja pavarų dėžė, nauja hidraulinė pompa, nauji hidrauliniai varikliai dabar apie 600 darbo valandų iškrovimo juosta atnaujinta, magneto dalis pakeista įrankiai 85% naujas aptarnavimas nauja dažymo danga tuštuojau paruoštas naudoti

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 37 656 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 85 t, pildymo angos plotis: 1 500 mm, pildymo angos ilgis: 1 100 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 650 kg, bendras svoris: 25 000 kg, alyvos bako talpa: 1 000 l, paskutinio kapitalinio remonto metai: 2024, tūrio srautas: 410 m³/val, transporto plotis: 2 400 mm, transporto ilgis: 9 300 mm, Good day, We hereby offer you, subject to prior sale, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data has been taken from the manufacturer’s operating manual and brochures, for which we cannot guarantee the accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific pressing force: 100 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume per cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Strapping: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Ljdjv T I Evopfx Akhsac Note: The machine was used in a recycling facility for compacting paper, cardboard, foils, and plastics such as bottles, buckets, canisters, and drums. The baler is in good condition. Many wear parts and entire assemblies have already been renewed over the last three years. The machine has been serviced regularly. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH Service Team

Gamybos metai: 2012, veikimo valandos: 1 h, būklė: naudotas, Transmission: Automatic Power: 1 kW (1 hp) Unladen weight: 20,000 kg For further information, please contact Emal Jaweed. Lasdpfx Ajx R T D Djkhoc Scrap press, Hassel Ariete 480, Bonfiglioli crane, year of manufacture: 2012, Length: 9,600 mm, Width: 2,500 mm, Height: 2,820 mm, Weight: 20,000 kg, Engine: 6-cylinder Deutz, Setup: hook-lift / easy relocation, Video available Miscellaneous: * We offer more than 200 units for sale. * Our location is 30 km north of Frankfurt/Main airport. * Financing & leasing available. * Specialist for worldwide transport & shipping. * No liability for typographical or printing errors. * Subject to prior sale and errors. * Trade-in possible! * Only the general terms and conditions (AGB) of Jaweed GmbH apply to the purchase of vehicles / used machinery. * Further information as well as our terms and conditions can be found on our website.