Ryšulių presas

HSM 4812

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 48 t, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 550 kg, bendras plotis: 2 583 mm, bendras aukštis: 3 994 mm, bendras ilgis: 6 661 mm, Įranga: dokumentacija / vadovas, HSM VK 4812 P Year of manufacture: 2015 Fully automatic baler. The machine has undergone service and maintenance by an authorized HSM Service Center located in Germany. The baler is supplied complete with a ramp for ejection of finished bales and wire stands for binding wire. Pressing force: 480 kN Motor power: 18 kW Voltage/Frequency: 400V/50Hz Capacity at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Overall length x width x height: 6661 x 3994 x 2583 mm Machine weight: 10.2 t Pressed materials: Foil, mixed paper, cardboard, punching waste Bale strapping: 4-fold with wire We also have other balers in stock. Transport costs depend on weight, volume and especially the distance. For inquiries, the following information is important: delivery address (postal code and city); for further details, telephone contact is required, so please inquire about transport costs and other shipping options by calling us. Our contact details are available in the seller’s legal notice. We sell and export worldwide and, thanks to our large warehouse capacity, can supply even large quantities flexibly and quickly. We issue intra-community invoices – VAT-free. Opening times Bdsdpfxexx N Hzj Admsk Mon-Fri: 8:00 am - 4:00 pm Sat: closed

Sąlyga: naujas,

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2014, veikimo valandos: 5 612 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 48 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 1 250 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 550 kg, bendras aukštis: 2 800 mm, bendras svoris: 12 000 kg, transporto aukštis: 2 800 mm, alyvos bako talpa: 300 l, galia: 30 kW (40,79 AG), tuščias svoris: 12 000 kg, tūrio srautas: 332 m³/val, Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG Model: VK 4812 Year of construction: 2014 Operating hours: 5,612 hours (as of August 2025) Main press force: 48 t Specific press force: 58.2 N/cm² Feed opening dimensions: 1,250 x 1,020 mm Theoretical cycle time: 11.2 s Theoretical throughput: 332 m³/h Bale dimensions: 1,100 x 750 x 600 to 1,200 mm Drive power: 30 kW Total connected load: 32 kW Rated current: 59 A Binding: 4-fold horizontal, fully automatic Throughput rates, depending on material: Bulk density 20 kg/m³: up to 6 t/h Bulk density 50 kg/m³: up to 13 t/h Bale weights: up to 550 kg, depending on material PLC control: Siemens SIMATIC S7-200 Operator panel: Siemens HMI touch panel Hydraulic tank capacity: 300 L Oil type: HVI 46 Bdodpfxovtpq Ho Admjk Machine installation dimensions with bale chute: 10,046 x 4,387 x 2,705 mm (L x W x H) Transport dimensions (baler only): 8,500 x 2,500 x 2,750 mm (L x W x H) Machine weight (baler): approx. 12 t Scope of delivery: – HSM VK 4812 baler, without hydraulic oil, without conveyor technology – Two wire spool boxes for 8 x 40 kg wire spools, without wire – Bale chute – Machine documentation in German Remarks: The baler is equipped with an oil cooler and volt-free contacts for external control. Operation at the control cabinet is on the left in pressing direction, the needle unit is on the right side and can be folded backwards for transport. The baler has been partially overhauled and tested in our workshop, see photos. Documentation (operating instructions, CE declaration, electrical/hydraulic schematics) is available in German. Viewing is possible by appointment. We do not assume liability for the technical information or for any possible errors.

Sąlyga: geras (naudotas), Gamybos metai: 2011, veikimo valandos: 20 580 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 48 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 1 250 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 450 kg, įėjimo srovė: 59 A, bendras svoris: 12 000 kg, transporto aukštis: 2 750 mm, alyvos bako talpa: 300 l, galia: 30 kW (40,79 AG), transporto plotis: 2 300 mm, transporto ilgis: 8 500 mm, bakelio talpa: 300 l, Good day, We hereby offer you, subject to prior sale, a used baling press manufactured by HSM, type VK 4812. Bsdpfx Aet H Rcaodmodk The following technical data is taken from the manufacturer's operating manual and brochures; we cannot guarantee the accuracy or completeness of this information. Manufacturer: HSM Type: VK 4812 Year of manufacture: 2011 Operating hours: 20,580 hours Pressing force (main press): 48 t Drive power: 30 kW Machine weight (press): 12 t The machine documentation is available in German. An inspection is possible by appointment at our workshop. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, veikimo valandos: 30 408 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 250 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, balo svoris: 550 kg, bendras svoris: 16 000 kg, alyvos bako talpa: 600 l, paskutinio kapitalinio remonto metai: 2024, Technical Data – Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales pressed: 198,059 units (as of April) Main press ram force: 50 t Specific pressing force: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under operating conditions: 260 m³/hour Feed chute dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, length variable Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput rates at a bulk density of: - 30 kg/m³: 6 to 7 t/hour - 50 kg/m³: 7 to 9 t/hour - 100 kg/m³: 11 to 14 t/hour Bale density (paper/newspapers): 400 to 550 kg/m³ Hydraulic oil tank capacity: 600 L Bjdpfx Adou Thhremodk PLC: Telemecanique TSX Micro Operator panel: Schneider Magelis Effective transport dimensions excl. press: 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (press only): approx. 16 t Condition of the baler: The machine underwent partial refurbishment and general maintenance in our workshop. After completion of the refurbishment, the baler was tested in operational mode and is now available for immediate sale. The following refurbishments were carried out: General work: - Machine cleaned, derusted, primed, and partially repainted - Wire entry marks in the press channel openings welded and smoothed Hydraulic unit: - Hydraulic oil tank fully drained, cleaned, and refilled with new oil - Oil and air filters replaced - Leaking oil sight glass on the hydraulic tank replaced - All hydraulic hoses replaced Electrical system: - Program menu language set to English - Two key switches on the operator panel replaced - Control cabinet replaced - Signal lamp on the control cabinet replaced - Flap limit switch replaced - Wirthulator electrics renewed, connected, and tested Press ram: - All four guide rollers on the press ram removed and replaced - Main hydraulic cylinder disassembled, overhauled (cylinder tube honed, complete seal kit replaced), leak test performed - All wear-resistant plastic blocks on the press ram replaced Pre-press flap: - Both bearings on the pre-press shaft replaced - Both hydraulic cylinders disassembled, overhauled (cylinder tubes honed, complete seal kits replaced), leak test performed - Scraper flap on the pre-press replaced Tying unit: - Two complete needles with wire guide pulleys replaced - Needles adjusted and set - All wire guide pulleys in needle heads replaced - Twisting fingers replaced - Two twister shafts replaced - All eight wear plates on the twister unit, under the twisting fingers, replaced Scope of delivery: Only the baler is sold. Documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is complete and available. Inspection by appointment possible. We do not accept liability for the technical data or possible errors.

Gamybos metai: 2025, Sąlyga: naujas, The LITech hammer mills HM 120 / 200 / 300 / 400 are ideally suited for the pre-crushing of medium-hard, tough, and brittle materials such as soils, precious metals, electronic waste, epoxy resin, gypsum, glass, catalysts, ceramics, clinker, coal, coke, minerals, and many more! Bdedpfog Ay Dhsx Admok

Sąlyga: geras (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, kamuolio ilgis: 1 000 mm, ryšulio plotis: 750 mm, ryšulio aukštis: 750 750 750 mm, balo svoris: 500 kg, įėjimo įtampa: 400 V, bendras svoris: 7 500 kg, alyvos bako talpa: 500 l, galia: 30 kW (40,79 AG), tuščias svoris: 7 500 kg, įėjimo dažnis: 50 Hz, Manufacturer: Pal Pacomat V Year of manufacture: 1985 Main press force: 50 t Specific pressing force: 5 kg/cm² Feed channel: 1,000 x 720 mm (L x W) Theoretical throughput capacity: 200 m³/h Bale size: 700 x 1,000 mm (W x H), adjustable length Drive motor: 30 kW Bedoic Rl Dopfx Admjdk Bale weight: approx. 500 kg Machine weight: approx. 8 t The hydraulic unit is operational; the drive motor is currently disassembled.

Gamybos metai: 2024, Sąlyga: naujas, Overview – of the various configurations *not every position is needed: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demonstration unit with discharge (only shown schematically in the image) *optional, if feeding with wheel loader is desired Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4 m Four sieves are mounted on the underside, which are extracted. Unit price net from: €9,750 - Extraction components / hoses flat rate €945 net - Control system for entire plant Unit price net: €2,750 - Demonstration extraction unit MMJET 160 demo, with cleaning function Connection 160, Fan 2.2 kW Air capacity 1850 m³/400 V automatic compressed air cleaning Unit price net from: €6,950 - Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour at +/- 20 kg tfrom €59,995 net *A reference system (baler) is located at ZIP code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height adaptable upon request) Weight of bale +/- 20 kg (depending on material) Capacity: approx. 30 bales per hour Storage bin approx. 0.7 m³ volume Fill level sensors for min./max. fill level in the bin Hydraulic pre-compressor Hydraulic press ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in the press channel for easy bale ejection Dimensions (L x W x H) 3105x2830x2455 mm Weight approx. 1500 kg mütek balers / packaging machines were developed for producing bales from various materials such as shredded miscanthus or elephant grass, wood shavings, sawdust, and shredded straw. The machine features robust construction, ensuring consistent quality during continuous operation. The baler compresses the material filled in the storage bin without any additional binding agents by means of hydraulic pressure and packs the material in plastic bags. The machine allows significant volume reduction, depending on the material. Maximum material moisture must not exceed 18% Atro. The mütek baler’s container can be filled automatically or manually and has a capacity of approx. 0.7 m³. Containers with larger volume or with integrated extraction and filter systems as a complete disposal unit are also available. In addition to automatic filling via de-dusting units, mütek also offers filling by means of screw conveyors. Both variants allow automatic dedusting. mütek balers are equipped with a control cabinet for system management. In the standard version, bale dimensions (width x depth x height) are 400 x 400 x 800 mm. Upon request, height can be adapted to your requirements. The following advantages result from baling: Bodsff Sbijpfx Admsdk - Simple and safe storage - No loose dust - Minimization of storage volume - Low transport volume *Raw material requirements: - dry (max. 30% ATRO) - max. 35 mm length

Sąlyga: beveik kaip naujas (naudotas), 1500 m² Schäfer R3000 Mezzanine, 3-Storey Used, excellent condition, like new – see photos Ground floor: steel-constructed mezzanine; two additional levels: Schäfer shelving system Manufacturer: SCHÄFER R3000 CAD design and assembly 3-storey construction Partial sale possible Price: on request! Item is in stock. Transport and installation available on request. Inspection possible at any time by appointment. Further information available upon request. Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock. Bedehzw Hijpfx Admsdk (Subject to changes, errors in technical data, details and prices as well as prior sale! See our T&Cs, all prices excl. VAT ex works) Purchase / Sale We are constantly looking for or offering a wide range of items from various sectors. - Swept-clean business clearances - Liquidations - Fast – flexible – efficient! We also clear and/or dispose for insolvency administrators. Contact us with a few keywords and we will get back to you promptly. To visit our website, please click on our logo!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 21 676 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 750 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 25 000 kg, transporto aukštis: 3 000 mm, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tuščias svoris: 25 000 kg, tūrio srautas: 930 m³/val, darbinis slėgis: 250 juosta, Good day, We hereby offer you, subject to prior sale, a used baler from manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the operator’s manual and manufacturer brochures. We cannot accept any liability for the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours, as of November 2024 Main press force: 78 t Specific press force: 95 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume / press cycle: 2.7 m³ Throughput capacity under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions when assembled with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Bdsdpjvgrh Uofx Admsk Machine weight (press only): approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH