Presas VK 4812

HSM GmbH + Co. KG Ballenpresse, VK 4812

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection Hjdpfxovwlqqe Af Ijng - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Only the baler is being sold. Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Sąlyga: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 988906827, Fully mobile concrete filling station Frumecar Fastmix * THE CONCRETE FILLING STATION * - Year of manufacture: New - 2-4 compartments with 7-14 m³ capacity - Capacity: 14-25 m³/h depending on mixer size - Mixer size: 0.5 m³ - 0.75 m³ - 1.0 m³ - Concrete batching software by Siemens, featuring a self-service terminal, new barcode system, and EC card terminal - Concrete discharge belt, 9 m length Hnsdpohd I Smjfx Af Iog - 32-ton cement silo incl. cement screw conveyor - Assembly, commissioning, and training included - 2-year warranty - Highest quality plant on the market. All components manufactured in Europe. Electric motors and gearboxes by Siemens. Other plant components by market leader VAM. Input errors and omissions in this offer are expressly reserved. Only the specific agreements in the order confirmation and/or purchase contract are binding. More construction machinery and mixing plants available on our website Further information Application: Construction Material type: Concrete Overall condition: very good Technical condition: very good Visual condition: very good

Sąlyga: naudotas, Gamybos metai: 2003, Technical Details: Pressure: 40 t Box opening: 1200 x 730 mm Material: Cardboard, plastic – cardboard bottles Voltage: 400 / 50 V / Hz Total power requirement: 16.4 kW Hnjdpju Nw Ezefx Af Isg Transport dimensions (machine): 6.5 x 6.2 x 2.7 m Fully automatic hydraulic CHANNEL BALER for recycling with feed unit/conveyor belt LxW: 4500x1000 mm, motor-driven with automatic 3-fold tying unit Bale counter/indicator Press chamber LxWxH: 1800x800x800 mm with 1.2 m³ volume Bale size LxWxH: 300–1500 x 800x800 mm Bale weight: 250 – 450 kg depending on material and bale length Filling opening LxW: 1200x730 mm, filling height 1200 mm Hopper size LxWxH: 1200x1200x1400 mm; filling height 2500 mm

Sąlyga: naujas, Gamybos metai: 2024, ♻ MONSTER is a hybrid machine consisting of a PRE-SHREDDER P 150 (equipped with two reduction gearboxes), combined with the SHREDDER SD 90 XL. The MONSTER shredder stands for effective shredding of various types of pallets, polystyrene, plastics, waste, and electronic equipment. ✔ Motor power: 30 kW + 1x 5.5 kW-9.2 kW (shredder + pre-shredder) ✔ Rotor length: 870 mm + 1580 mm (shredder + pre-shredder) ✔ Rotor diameter: 270 mm + 355 mm (shredder + pre-shredder) ✔ Rotor speed: 80-120 + 5.3-10.3 rpm (shredder + pre-shredder) ✔ Number of cutting blades: 2x19 + 12/12 (shredder + pre-shredder) ✔ Granulation: 10-50 mm ✔ Capacity: up to 60 pallets/hour* ✔ Suitable materials: pallets, polystyrene, electronic scrap, plastic, wood, ... ✔ Feed opening: 2072 x 1070 mm ✔ Dimensions (L/W/H): 3.73/1.78/2.67 m ✔ Weight: 4200 kg Hsdpehwwplefx Af Ieng 2 years warranty or 2,000 operating hours

Sąlyga: naudotas, Technical details: Max. balancing mass: 800 kg Balancing body diameter: 1250 mm Balancing speed: 190 – 3600 rpm Bed length: 2600 mm Voltage: 380 V/Hz Drive power: 7.5 kW Machine weight approx.: 1.5 t Machine dimensions (LxWxH) approx.: 3.5 x 1.7 x 2.0 m Control cabinet dimensions: W: 650 x D: 250 x H: 800 mm Horizontal Balancing Machine The balancing machine is used to measure and balance the static and dynamic unbalance of rotors. Max. balancing mass: 800 kg with equal load distribution, i.e. 400 kg per bearing pedestal Power transmission via cardan shaft Bearing journal Ø min./max.: 16-95 / 95-180 mm Bearing center distance min.: 125 mm; distance from shaft end to bearing center max.: 2070 mm Measuring speeds: 1st gear = 190 – 650 rpm 2nd gear = 400 – 1250 rpm 3rd gear = 700 – 2100 rpm Hsdpfxju Upp Te Af Ijng 4th gear = 1200 – 3600 rpm 2 workpiece supports with manual traverse along the entire bed length Schenk measuring device with digital display Plus a range of accessories, e.g. multiple rotor shafts with different diameters and various rotor mounts—please inquire! i.D.

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, kamuolio ilgis: 1 000 mm, ryšulio plotis: 750 mm, ryšulio aukštis: 750 750 750 mm, balo svoris: 500 kg, įėjimo įtampa: 400 V, bendras svoris: 7 500 kg, alyvos bako talpa: 500 l, galia: 30 kW (40,79 AG), tuščias svoris: 7 500 kg, įėjimo dažnis: 50 Hz, Manufacturer: Pal Pacomat V Year of manufacture: 1985 Main press force: 50 t Specific pressing force: 5 kg/cm² Feed channel: 1,000 x 720 mm (L x W) Theoretical throughput capacity: 200 m³/h Bale size: 700 x 1,000 mm (W x H), adjustable length Drive motor: 30 kW Bale weight: approx. 500 kg Hnjdsic Rl Depfx Af Iog Machine weight: approx. 8 t The hydraulic unit is operational; the drive motor is currently disassembled.

Sąlyga: paruoštas naudoti (naudotas), Feature Specification Hnsdpfow A I Tdsx Af Iog Rotor Size: φ ≈ 370 mm × 1500 mm Rotor Speed: 80–125 rpm Knife Count: Up to 123 (V-rotor) Power: 75–90 kW (electromechanical); up to 110 kW Infeed Opening: 1500 × 1890 mm Weight: ~6400 kg Output Particle Size: 15–100 mm (interchangeable screen) Drive & Bearings: WAP gearbox, sealed bearings Control: Siemens PLC Discharge: Belt / screw / suction available Applications: Plastics, packaging, wood, fibre, etc.

Sąlyga: naujas, - Motor power 9 kW - PLC-controlled operation, two-hand safety control - Cutting force 35 tons - Straight design splitting table - Cutting channel: - max. blade length L= 2000 mm - max. opening H= 1200 mm - Machine weight approx. 4 tons - Hand protection guard in the operator panel area and on the opposite side - Forklift insertion shoes included (for easy transport of the machine by forklift) Hedpfed Hf Tdex Af Isng In stock – available immediately Price and further information on request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 21 676 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 750 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 25 000 kg, transporto aukštis: 3 000 mm, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tuščias svoris: 25 000 kg, tūrio srautas: 930 m³/val, darbinis slėgis: 250 juosta, Good day, We hereby offer you, subject to prior sale, a used baler from manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the operator’s manual and manufacturer brochures. We cannot accept any liability for the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours, as of November 2024 Main press force: 78 t Specific press force: 95 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume / press cycle: 2.7 m³ Throughput capacity under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Hnedpfx Afjvgrh Uj Ieg Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions when assembled with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press only): approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Sąlyga: paruoštas naudoti (naudotas), Presavimoji Hsm HL 4809 LI - Didelė užpildymo anga, idealiai tinka didelėms dėžėms Hnsdpera Dddefx Af Iog - Konteinerio vartymo įtaisas patogiam užpildymui Jėga kN: 480 - Įtampa/dažnis: 3 x 400 V / 50 Hz - Balo svoris kg (priklausomai nuo medžiagos): iki 400 kg - Balo matmenys ilgis x plotis x aukštis mm: 1200 x 1100 x 750 - Įrenginio matmenys ilgis x plotis x aukštis mm: 5648 x 1849 x 2515 Tuščios eigos ciklo laikas sekundėmis: 53 - Rankinis surišimas: 4 kartus viela