Plokštinė pjūklas

Homag Profi HPL 380/38/22/X

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, veikimo valandos: 3 000 h, 5-axis CNC portal machine; console table with 6 movable consoles, each equipped with 2 suction cups, side and longitudinal stops, LED position indicators for vacuum suction cups. Venture 316 Future package. 10 extraction rails, Power-Clamp connection, vacuum connection for templates. WORKPIECE PARAMETERS: – Maximum workpiece lengths: All units single 3,300 mm; pendulum operation max. 1,740 mm Tool diameter 25 mm: single 3,475 mm, pendulum max. 1,915 mm - Workpiece width: Front stop: 950 mm with all units / 1,050 mm with 25 mm tool diameter Rear stop: up to 1,400 mm / 1,550 mm – Workpiece thickness: – Max. 250 mm including clamping devices – Up to max. 60 mm with standard clamps SAFETY AND PROTECTIVE EQUIPMENT: EU compliant; SAFETY FENCE ON THE RIGHT WITH DOOR Left and rear: wall installation! Ncjdpfx Asy E Npfefasu Support equipment: 10 kW Drive5C spindle and 14-position (turret) tool changer + 9-position linear side changer Drilling head with 16 spindles (V12/H4/S0/90°) DRIVE5C+ aggregate interface TOOL CHANGER PROBE SOFTWARE FOR POSITION MEASUREMENT, CNC COORDINATE ROTATION TOOL HANDOVER STATION COOLANT TANK FOR PROCESSING SPINDLE VACUUM PUMP 300/360 M3/H Powerclamp pneumatic package Controller: POWERCONTROL PC85 with POWERTOUCH control system; IPC POWERPACK, Operator terminal for program start; camera system with tablet PC WOODWOP CAD/CAM INTERFACE STANDARD DOCUMENTATION AND CONTROL TEXTS: GERMAN Delivery only includes the pictured tools and HSK holders!

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, - 5-axis spindle DRIVE 5C+ 15kW - Working area: 4200x1550 mm - Tool magazine: 14 positions - Drills: 9x vertical, 2+2 horizontal - Chip conveyor Ncedew Dv Hzepfx Afaju - WoodWOP 6.1

Būklė: naudotas, Gamybos metai: 2018, 1 unit CNC-controlled drilling, gluing and dowel inserting machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz, complete in standard configuration with: - Linear guide support consisting of: 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. reinforced blow-out, gluing and dowel inserting station for 8 mm diameter dowels, dowel length 30 mm - Fully automatic, electronically controlled centralized lubrication - X-axis NC controlled, with working length 1,300 mm, max. travel speed 78 m/min - Z-axis, position programmable over support table 5-40 mm, with option for NC-controlled Z-axis - Dowel insertion projection 7-20 mm, programmable with option of NC-controlled Y-axis Drilling depth from 0-35 mm (with drill length total 70 mm) is automatically set with dowel protrusion - Enclosed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 liters of water - Indicator lamp for glue level in glue container - 1 pc. side fence left, 1 pc. side fence right, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10°, for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection diameter 80 mm - 1 pc. TCT control with: integrated industrial PC, incl. Beckhoff TWINCAT Soft PLC, operating temperature range 0-50°C, 15" resistive TFT industrial touchscreen display, 1024 x 768 resolution, 2 GHz CPU, 256 MB RAM, 2x network interfaces, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with absolute, relative, or grid dimensioning, automatic workpiece mirroring and process optimization, 4 work zones assignable with different programs, graphical workpiece display, parametric programming, zero-point shifting, programmable job lists, plain text error diagnosis OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 4 additional vertical angled clamping cylinders 10° with bracket (total 8 clamping cylinders) - Surcharge for machine bed length 1,800 mm with working length 1,800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm (Standard working length not reduced) - 1 NC-controlled Y-axis, with ballscrew and dynamic travel speed 300 mm/sec. Via software, programmable dowel insertion projection 7-30 mm and drilling depth 0-42 mm (with drill length total 77 mm) for vertical drilling unit from above, Y-axis position 5-42 mm - Surcharge for NC-controlled Y-axis position 5-62 mm instead of 5-42 mm - Surcharge for: 1 vertical drilling unit from above, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm, Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K Nodpfx Aexwaz Hefajcu

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, HOMAG WEEKE OPTIMAT ABD 150 yra aukštos našumo CNC staklės, skirtos tiksliam gręžimui, kaiščių įdėjimui ir furnitūros montavimui baldų gamyboje bei plokščių apdirbime. Ši įranga idealiai tinka baldžių dirbtuvėms, baldų gamintojams ir pramoniniams medienos apdirbimo cechams, reikalaujantiems tikslaus ir efektyvaus automatizuoto apdirbimo. Įrenginio savybės: CNC valdomas gręžimo ir įdėjimo modulis Integruota klijų ir kaiščių įdėjimo sistema Tvirta pramoninė konstrukcija Kompaktiški matmenys Paprastas valdymo pultas Nodoym Nvtspfx Afascu Atitinka CE reikalavimus Staklės reguliariai prižiūrėtos ir paruoštos darbui.

Būklė: naujas, Gamybos metai: 2025, New machine Year of manufacture: 2025 Edge sanding machine with integrated, dual conveyor feed system for solid wood components, veneer edges, and curves, featuring oscillation of the entire sanding unit. Processing of solid and veneered edges either manually or via automatic infeed: - On the veneer sanding side, workpiece guided along two fence plates (infeed fence with integrated extraction slots and fine adjustment of chip removal per scale) onto an elastic sanding pad (oscillating for even use of the graphite lining, including grit compensation and belt tension relief via two deflection rollers); with infeed fence extension, table size 1180 x 325 mm. Ncodpfew Tfx Dox Afasu Manual processing of straight and curved solid wood parts: - On the solid wood sanding side against the continuous, low-friction sanding belt return, table 1180 x 325 mm including mitre fence with scale - On the front end with an optionally quick-mountable half-round table (with drillings for dust extraction) against the rubber-coated belt drive roller Ø 90 mm, support radius 300 mm - On the drive roller with an optionally quick-mountable auxiliary cast iron table (with drillings for dust extraction), 400 x 500 mm on oscillating shaft for using sanding drums Ø 25, 30, 40, and 45 x 100 mm for external and internal curves, with spindle protection cover Design: Robust machine frame with heavy cast iron tables, sanding unit motorized height adjustment up to 120 mm and tiltable up to 45° without any table adjustments (patented design), main motor 3 kW (4 HP), 400 V/50 Hz, with motor protection switch; separate motor for belt oscillation, oscillation stroke programmable from 10–90 mm; control box integrated into the frame; constant belt tension with automatic belt length compensation; adjustable belt tracking; safety guard; dust extraction via two extraction hoods, flexible hoses and a common internal duct connected to a Ø 150 mm connector; recess in machine frame for easy movement by hand pallet truck or forklift; belt width 150–200 mm, belt length 2000 mm, working height 830 mm (solid wood sanding table) or 900 mm (veneer sanding table); net weight 750 kg; footprint 1150 x 800 mm. Feed system: Integrated into the machine frame, on the bottom two parallel conveyor belts (50 mm wide, 250 mm apart), top pressure rollers 20 mm wide; feed motor 0.55 kW (0.75 HP), infinitely variable speed 3–15 m/min. Premium comfort version: Kündig UNIQ-S Includes: Table extension for UNIQ/UNIQ-S/Flash Includes: Upward extraction channel for UNIQ (without damper) Includes: Half-round table for belt drive roller UNIQ-S Availability: Short lead time Location: Flörsheim

Būklė: naudotas, Gamybos metai: 2013, galia: 17,1 kW (23,25 AG), įėjimo įtampa: 400 V, įėjimo srovė: 29 A, įėjimo dažnis: 50 Hz, X ašies eiga: 4 320 mm, Y ašies eiga: 1 326 mm, Z ašies eigos atstumas: 170 mm, ašių skaičius: 5, įrankių magazino lizdų skaičius: 33, Įranga: CE žymėjimas, Biesse Rover A 1343 CNC Bearbeitungszentrum 5-Achsen Beschreibung Rover A ATS CNC-Bearbeitungszentren Arbeitsbereiche X = 4.320 mm; Y = 1.326 mm; Z = 170 mm Späne- und Reststückförderband Automatisches Schmiersystem Fernbedienkonsole Sicherheitssysteme gemäß den Anforderungen der Richtlinie 2006/42/EG Vakuumsystem für 1 Vakuumpumpe mit 250 m3/h oder 300 m3/h 1 x 250 m3/h Vakuumpumpe für Standardsystem Zusätzliches Vakuumsystem für Maschine mit doppeltem Arbeitsbereich Multi-Zonen, 8 Ebenen und 24 Schlitten 8 ATS-L = 1280 mm Decks – 24 Wagen – mit automatischer Positionierung (ATS-EPS X-Y) 8 Referenzanschläge mit 115 mm Rückhub 8 vordere Referenzanschläge mit 140 mm Hub, positioniert in 1.190 mm Höhe von den hinteren Anschlägen 4 Seitenanschläge mit 140 mm Hub (2 rechts + 2 links) mit Ausstattung 2 zusätzliche Seitenanschläge mit 140 mm Hub (1 rechts + 1 links) Pneumatisches System für Doppelhub-Ladebalken 6 pneumatische Doppelhub-Ladebalken als Aufladehilfe für Uniclamp-Spannstöcke H=74 für Werkstücke bis 98 mm Stärke Vakuummodulgröße 132 x 146 x H74 mm Vakuummodulgröße 132 x 75 x H74 mm, vorbereitet für Stifte Uniclamp-Spannstock mit 2 Bewegungen, Schnellkupplung und Rundteller – H=74 mm, für die Einspannung von Werkstücken mit einer Stärke von 40 bis 98 mm 8 Referenzanschläge mit 140 mm Hub, positioniert in 670 mm Höhe von den hinteren Anschlägen Uniclamp-Spannstock mit 2 Bewegungen, Schnellkupplung und Rundteller – H=74 mm für die Einspannung von Werkstücken mit einer Stärke von 83 bis 140 mm Ncedpfx Afey U Naisaju Flansch zur Vorbereitung einer 5-achsigen interpolierenden Arbeitseinheit für Aggregatmontage * Die Aggregate können nur mit der Elektromotorspindel in vertikaler Position verwendet werden * Erfordert die 5-achsige interpolierende Arbeitseinheit Vorbereitung für Ablenkelemente mit induktivem oder pneumatischem Sensor an der 5-Achs-Betriebseinheit Kühlmittelüberwachungseinheit als Ersatz für den Wärmetauscher bei 13-kW-5-Achs-Einheiten Betriebseinheit mit 5 interpolierenden Achsen, 13 kW (17,4 PS), HSK F63 Anschluss, flüssigkeitsgekühlt Enthält Wärmetauscher zur Kühlung des Kühlmittels bei Betriebstemperaturen zwischen +5° und +40° Rechter Deflektor mit pneumatischem Sensor für 11-kW-5-Achs-Elektrospindel Upgrade von BiesseWorks Basic Machine auf BiesseWorks Advanced Machine Eisengabel für Ablenkelemente mit induktivem oder pneumatischem Sensor Kettenmagazin für 33 Werkzeuge – Teilungsmaß 120 mm Flexible Frontschutzabdeckung für unbegrenzte Y-Beladung (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Preise exkl. Inserierungskosten MaschinenSucher Die besten Holzbearbeitungsmaschinen aus den Niederlanden Holland De beste gebruikte machines uit Nederland

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2014, ašių skaičius: 3, Šis 3 ašių HOMAG WEEKE OPTIMAT ABD150 buvo pagamintas 2014 m. Tai naudotos kelių suklių gręžimo staklės, skirtos tiksliam gręžimui ir kaiščių įterpimui. Jei ieškote aukštos kokybės gręžimo galimybių, apsvarstykite mūsų parduodamas HOMAG WEEKE OPTIMAT ABD150 stakles. Susisiekite su mumis dėl išsamesnės informacijos. • Naudotos gręžimo ir kaiščių įterpimo staklės Ncedpfxey Dgpae Afaeu

Būklė: naudotas, mašinos/transporto priemonės numeris: 008206, Didžiausias plokštės plotis: 4300 mm Ncsdpfsx A Tizox Afaeu Didžiausias plokštės ilgis: 4300 mm Didžiausias pagrindinio pjūklo išsikišimas: 125 mm Spaustuvų kiekis: 9

Būklė: naudotas, Gamybos metai: 2025, Funkcionalumas: nepatikrintas, Homag Centateq P110 PROFI BMG110/3115/F/K CNC apdirbimo centras (2025) su Almig Combi XP15 oro kompresoriumi, sumontuotu ant resiverio (2025) Nedpfx Afozc Rzpeajcu Air Plants Dust Extraction Ltd dulkių ištraukimo sistema (2025)

Būklė: naudotas, Gamybos metai: 2014, Used machine Year of manufacture: 2014 Features and technical data: Completely in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-off, gluing, and dowel driving station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 105 m/min - Z-axis adjustable manually via mechanical digital counter, position via support table 5-40 mm - Dowel insertion projection adjustable from 7-20 mm via mechanical digital counter, drilling depth from 0-35 mm (with drill length GL 70 mm) is automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - Selector switch GLUE/WATER for rinsing the glue system, each with: 1 stainless steel tank for 7.5 kg glue and 7.5 l water - Control lamp for glue residue indication in the glue tank Ncjdpjy Ih Sksfx Afasu - 1 pc. side stop left, 1 pc. side stop right, and 1 pc. center stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angular clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Ø 80 mm 1 pc. TCT control with: Built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" capacitive touchscreen, operating system: WINDOWS 7 - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and work sequence optimization, 4 working fields assignable with different programs, graphical workpiece display, parametric programming, zero-point shift, programmable work lists, error diagnostics in plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with NC-controlled dynamic positioning for height adjustment of the drilling and dowel driving station (programmable from 5-40 mm), travel speed max. 30 mm/sec 1 single-spindle vertical drilling unit, drilling from ABOVE, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm), workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation e.g. for Häfele Minifix) 4 vertical angular clamping cylinders 10° with mounting, additionally, 1 keyboard with mounting Availability: as agreed; currently being overhauled at Ganner factory Location: Austria