STRECK SĄSAJA REV.07 NEC

HOMAG

Būklė: nepatikrintas (naudotas), Gamybos metai: 2005, Funkcionalumas: nepatikrintas, ruošinio aukštis (maks.): 40 mm, briaunos storis (maks.): 3 mm, X ašies padavimo greitis: 35 m/min, sukimosi greitis (maks.): 12 000 aps./min, įrankių magazino lizdų skaičius: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor output: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor output: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue joint scraping unit Polishing unit Ijdpfx Agsyqybuofotd 2 motors Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application with rubber band Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melting device for EVA hot-melt adhesive Laser system (Model: LaserTec) Roller set for pressing the edge with 5 pressure rollers Units mounted on protective covers CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 5321

Būklė: nepatikrintas (naudotas), Gamybos metai: 2007, Funkcionalumas: nepatikrintas, darbinis plotis: 1 935 mm, ašies skaičius: 40, plokštės aukštis: 350 mm, darbinis ilgis: 6 200 mm, ašių skaičius: 4, TECHNICAL DETAILS X-axis working range: 6,200 mm Y-axis working range: 1,935 mm Maximum panel thickness: 350 mm Number of edge band magazines: 3 Number of tools in the tool magazine: 22 (located at the rear of the machine) Drilling Spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X direction: 4 Spindles for horizontal drilling in Y direction: 8 Total number of vertical + horizontal spindles: 40 Milling Spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Isdpfx Agoyqx U Hsfotd Vacuum cups for securing the workpiece Safety mats at the front Vacuum pump Chip conveyor Fixed grooving unit for producing grooves in X direction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 8105

Būklė: nepatikrintas (naudotas), Gamybos metai: 2005, Funkcionalumas: nepatikrintas, galia: 19 kW (25,83 AG), X ašies eiga: 4 175 mm, Y ašies eiga: 1 730 mm, ašies skaičius: 20, Įrankių bokštelio 1 įrankių stočių skaičius: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverses: 8 Number of tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X direction: 2 Itjdpfx Asyttf Segfsd Number of spindles for horizontal drilling in Y direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, milling cutters and aggregates are not included in the scope of delivery. Safety guards are supplied as available (left side only). The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6906

Būklė: nepatikrintas (naudotas), Gamybos metai: 2008, Funkcionalumas: nepatikrintas, X ašies eiga: 4 175 mm, Y ašies eiga: 1 550 mm, ruošinio aukštis (maks.): 40 mm, ašies skaičius: 30, važiuojamoji greitis (maks.): 80 000 mm/min, TECHNICAL DETAILS X-Axis Travel: 4,175 mm Y-Axis Travel: 1,550 mm X-Axis Traverse Speed: 80 m/min Y-Axis Traverse Speed: 80 m/min Z-Axis Traverse Speed: 30 m/min Max. Workpiece Height: 40 mm Number of Suction Traverses: 8 Spindles Number of Vertical Drilling Spindles: 20 Number of Horizontal Drilling Spindles (X-direction): 10 Total Number of Spindles: 30 Milling Unit Number of Controlled Axes: 4 + Flex5 Motor Power: 15 kW Automatic Tool Changer Liquid-cooled Saw Unit Tool Magazine 1 Number of Slots: 18 Tool Magazine 2 Itjdpeyttcwsfx Agfed Number of Slots: 10 EQUIPMENT NC positioning of suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 7350

Būklė: nepatikrintas (naudotas), Gamybos metai: 2008, Funkcionalumas: nepatikrintas, briaunos storis (maks.): 3 mm, X ašies padavimo greitis: 25 m/min, sukimosi greitis (maks.): 12 000 aps./min, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: Corner Processing Model: WK13 No. of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Router No. of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multi-function Model: FK13 No. of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Router Model: UF11 No. of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Itjdpfx Agjytr Hbofod Edge Processing Unit 7 Unit: Brush No. of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush No. of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spray unit Software for machine programming: PowerControl PC22 CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External Reference: 6216

Būklė: naudotas, Gamybos metai: 2007, bendras aukštis: 1 200 mm, bendras ilgis: 3 600 mm, bendras plotis: 1 480 mm, - Machine available from: 2025-12-15 - Year of manufacture: 2007 - Documentation available: Yes - Type of documentation: Technical data, electrical schematics, user manual, operating system - Language: NL (Dutch) - CE marking present: Yes - CE certificate available: No - Serial number: - Number of units [pcs]: 8 - 1st unit type: - Tools included: Yes - 3rd unit type: - Tools included: Yes - 4th unit type: - Tools included: Yes - 5th unit type: - Tools included: Yes - 6th unit type: - Tools included: Yes - 7th unit type: - Tools included: Yes - Voltage [V]: 400 - Current consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (L x W x H) - Shipping units [pcs]: 4 Itedpfxjx Ei Sye Agfjd Financial Information VAT: The indicated price is excluding VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in available at any time for all items from the industrial sector Yorick Diebels

Būklė: naudotas, Gamybos metai: 2018, bendras aukštis: 1 650 mm, bendras ilgis: 4 400 mm, bendras plotis: 1 000 mm, Price: Upon request - Special features: - Description: The machine currently has a fault that needs to be rectified - Year of manufacture: 2018 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: - Number of units [pcs]: 9 - 1st unit type: - Tools included: Yes - 3rd unit type: - Tools included: Yes Ijdpfjyvf Nbjx Agfstd - 4th unit type: - Tools included: Yes - 5th unit type: - Tools included: Yes - 6th unit type: - Tools included: Yes - 7th unit type: - Tools included: Yes - 8th unit type: - Tools included: Yes - 9th unit type: - Tools included: Yes - Voltage [V]: 400 - Power consumption [A]: 10.3 - Fuse [A]: 16 - Transport dimensions: 4400mm x 1000mm x 1650mm (L x W x H) - Transport packages [pcs]: 1 Financial Information VAT: The indicated price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial sector equipment Yorick Diebels

Būklė: labai geros būklės (naudotas), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTER Movable platen (workpiece), stationary working head - horizontal platen (workpiece) Control unit PowerControl PC86 powerTouch (woodWOP software) Iodpfx Ajyu S I Iogfetd Working head safety enclosure No. 2 clamp locks for workpiece holding within the working area WEEKE pre-positioning unit – for faster positioning of workpieces in machines with gripper clamps. Infeed work support table – outfeed table (with powered conveyor belt) Equipped with automatic panel pusher Minimum workpiece dimensions (X-Y-Z): 200 x 70 x 8 mm (2 x 4 mm) Maximum workpiece dimensions (X-Y-Z): 3000 x 1000 (option 1300) x 80 mm (2 x 40 mm) Simultaneous machining of two workpieces (in Z-axis) Separate electrical and control cabinets PROCESSING UNITS (TOP): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 kW No. 42 independent vertical drilling spindles (drilling head power 2.3 kW) No. 10 independent horizontal drilling spindles (8 in X + 2 in Y) No. 1 grooving saw unit (X-Y direction, 90° swiveling), diameter 125 mm No. 1 vertical main spindle (milling aggregate) ETP (power of vertical main spindle 6 kW) PROCESSING UNITS (BOTTOM): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 kW No. 42 independent vertical drilling spindles (drilling head power 2.3 kW) No. 10 independent horizontal drilling spindles (8 in X + 2 in Y) No. 1 grooving saw unit (X-Y direction, 90° swiveling), diameter 125 mm No. 1 vertical main spindle (milling aggregate) ETP (power of vertical main spindle 6 kW)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Specifikacija: Pjovimo ilgis: 4300 mm Pjovimo plotis: 4300 mm Pjūklo disko išsikišimas: 80 mm Valdymo ekranas dešinėje pusėje Stalo paviršius visiškai oro pagalvėje Programuojamos tvoros judėjimo greitis pirmyn: 25 m/min Programuojamos tvoros judėjimo greitis atgal: 90 m/min Standartiniai spaustuvai: 225, 325, 475, 775, 1075, 1825, 3425 mm "Power Concept" – leidžia vienu metu pjauti kelias skirtingo ilgio ruošinių juostas, padidinant našumą iki 40%. Spaudimo sijos aukščio kontrolė Pjūklo vežimo greitis: 130 m/min Pagrindinio pjūklo variklis: 11 kW su pneumatiniu pakėlimu Įpjovimo pjūklo mazgas: 1,5 kW su pneumatiniu pakėlimu Elektroninis įpjovimo pjūklo reguliavimas iš valdymo ekrano 4 oro pagalvės stalai – 2160 x 650 mm Lipdukų spausdintuvas Itodpfx Aoyuw Umsgfed 400V 50Hz Valdymo jutiklinis ekranas Duomenų perdavimas per tinklą + USB prievadą CE Eco Plus technologijos – energijos sunaudojimas sumažinamas iki 20%.

Būklė: naudotas, Gamybos metai: 2014, CNC-controlled 5-axis machining centre with gantry design for milling and drilling workpieces made of wood or wood-based materials. Console table with 8 consoles Vacuum system WoodWop package for AV-PC LED position indicator system for manual positioning of vacuum clamps and consoles. Positioning accuracy: +/- 2.5 mm 5-axis main spindle 10 kW Drive5C. Articulated 5-axis head for milling, drilling, and sawing at any angle. - Interface for HSK F 63 - Z-axis travel 450 mm - Liquid cooling with temperature monitoring - Spindle with hybrid bearings for maximum precision and long service life - Frequency converter for electronic speed control 0–24,000 rpm - Maximum tool weight: 6 kg including holder Itodpsxvaymofx Agfed - Maximum tool length: 230 mm measured from the bottom of motor spindle - 18-fold carousel tool changer, bottom mounted Drilling head with 21 spindles, 2.2 kW Vertical spindles: 17 Max. drill diameter: 35 mm Total drill length: 70 mm Shank diameter: 10 mm Horizontal spindles: 4 One reinforced drilling spindle with holder for slot saw Max. drill diameter: 10 mm Total drill length: 70 mm Drill shank diameter: 10 mm