2 AŠIŲ KORTELĖ

HOMAG

Būklė: naudotas, Gamybos metai: 2007, galia: 43 kW (58,46 AG), pjovimo aukštis (maks.): 90 mm, pjovimo plotis (maks.): 1 200 mm, pjovimo ilgis (maks.): 5 600 mm, X ašies padavimo greitis: 40 m/min, The machine comes from a business liquidation. Inspections under power are possible! TECHNICAL DETAILS Maximum panel width: 1,200 mm Maximum panel length: 5,600 mm Minimum panel width: 150 mm Minimum panel length: 250 mm Minimum panel height: 8 mm Maximum panel height: 90 mm Maximum feed speed: 40 m/min The machine is configured as follows: Number of processing units: 4 Unit 1: Double saw, top and bottom Motor power: 11 kW Speed: 7,090 rpm Unit 2: Scoring unit Motor power: 2.2 kW Speed: 6,920 rpm Unit 3: Milling unit Motor power: 8 kW Speed: 7,090 rpm Unit 4: Milling unit Design: rear-mounted on table Motor power: 2.2 kW Speed: 6,920 rpm MACHINE DETAILS Control system: WINDOWS Machine programming software: POWER CONTROL PC22 Total connected load: 43 kW EQUIPMENT Upper pressure unit Gsdoy R S I Ujpfx Aa Uobl Additional guide for workpieces Rubber belt Positioning via NC The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 8448

Būklė: naudotas, Gamybos metai: 2007, X ašies eiga: 6 000 mm, Y ašies eiga: 3 000 mm, įrankių magazino lizdų skaičius: 10, valdiklio modelis: POWER CONTROL PC85, veleno greitis (maks.): 24 000 aps./min, The machine originates from a business liquidation. Inspections under power are possible! TECHNICAL DETAILS Travel range X-axis: 6,000 mm Travel range Y-axis: 3,000 mm Working area X-axis: 5,600 mm Working area Y-axis: 1,200 mm Traverse speed X-axis: 80 m/min Traverse speed Y-axis: 80 m/min Traverse speed Z-axis: 30 m/min Milling spindles: 2 Main electrospindle power: 11 kW Spindle speed: 24,000 rpm Total number of tool changer positions: 10 MACHINE DETAILS Type of machining: Milling Control system: POWER CONTROL PC85 Machine programming software: WOODWOP 5.0 Number of controlled axes: 4 Godpfxjy R Swij Aa Uobl Vacuum cups: 32 Individual vacuum pump capacity: 120 + 80 m³/h Number of pumps: 2 Total installed power: 27 kW EQUIPMENT Vacuum loading Motorized transfer system Automatic panel loading system Automatic panel stacking system Liquid cooling system CE marking Protective structure for operating units with safety sensors Protective mesh on the machine Chip conveyor for waste removal The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8457

Būklė: naudotas, Gamybos metai: 2002, X ašies eiga: 10 500 mm, Y ašies eiga: 2 700 mm, įrankių magazino lizdų skaičius: 24, valdiklio modelis: POWER CONTROL PC83, frezosios veleno greitis (maks.): 18 000 aps./min, The machine originates from a business closure. Inspections under power are possible! TECHNICAL DETAILS Travel range X-axis: 10,500 mm Travel range Y-axis: 2,700 mm Working area X-axis: 5,600 mm Working area Y-axis: 1,200 mm X-axis speed: 80 m/min Gedey R Si Sepfx Aa Usbl Y-axis speed: 80 m/min Z-axis speed: 30 m/min Main electrospindle power: 12 kW Number of milling spindles: 2 Milling spindle motor power: 12 kW Milling spindle speed: 18,000 rpm Number of controlled axes: 4 Number of tools in changer: 24 Number of tool magazine positions: 12 (2 magazines) Maximum workable panel height: 40 mm Minimum workable panel height: 10 mm MACHINE DETAILS Type of processing: edge processing, milling Control system: POWER CONTROL PC83 Programming software: WOODWOP 5.0 Total installed power: 51 kW Number of work zones: 1 Number of rails: 5 Number of vacuum cups: 10 Number of vacuum pumps: 2 Capacity per pump: 120 m³/h EQUIPMENT Work table: pod and rail Positioning by NC (numerical control) Automatic panel loading system: vacuum loading system Automatic panel stacking system Vacuum pump Liquid cooling system Adhesive unit with pre-melter for hot-melt glue Edge banding magazine Tool magazine at the rear of the machine Protective structure for operating units with safety sensors Protective net attached to the machine Safety system: front safety mats Waste chip conveyor The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photo documentation and technical/commercial documents provided for descriptive purposes. The buyer has the right to inspect the equipment prior to collection and assumes responsibility for installation, securing, and use of the machine at its destination. External reference: 8458

Būklė: naudotas, Gamybos metai: 2007, ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 35 mm, X ašies padavimo greitis: 40 m/min, valdiklio modelis: POWER CONTROL PC22", Machine comes from a business liquidation. Inspections under power are possible! Gbsdoy R R T Nepfx Aa Uol TECHNICAL DETAILS Number of working units: 11 Max. feed speed: 40 m/min Max. panel thickness: 60 mm Min. panel height: 16 mm Min. panel width: 85 mm Min. edge thickness: 0.3 mm Max. edge thickness: 35 mm Pressure system: rubber belt Workpiece support guides Positioning via NC Infeed alignment system for panels The machine is equipped as follows: PRE-MILLING / MILLING UNITS Number of pre-milling / milling units: 2 Unit 1: Pre-milling unit Motor power: 4.5 kW Speed: 5,860 rpm Automatic, time-controlled engagement Unit 2: End trimming unit Motor power: 1.8 kW Automatic tool change GLUING AND EDGE FEEDING Number of edge rollers: 68 Number of pressure rollers: 14 (1 x 7 + 1 x 7) Lamps for preheating the panel edge Pre-melter for PUR glue Gluing system Glue pot for PUR glue Positioning via NC EDGE PROCESSING UNITS Number of edge processing units: 8 Unit 1: End trimming unit Number of motors: 2 Motor power: 0.22 kW Speed: 10,350 rpm Positioning via NC Unit 2: Top and bottom flush milling unit Number of motors: 2 Motor power: 0.55 kW Speed: 11,400 rpm Unit 3: Corner rounding unit Number of motors: 2 Motor power: 0.4 kW Speed: 10,980 rpm Automatic tool change Positioning via NC Automatic, time-controlled engagement Unit 4: Scraper unit Positioning via NC Unit 5: Glue joint scraper unit Unit 6: Polishing unit Number of motors: 4 Motor power: 0.25 kW Speed: 1,390 rpm Automatic, time-controlled engagement Unit 7: Polishing unit Number of motors: 1 Motor power: 0.30 kW Speed: 3,000 rpm Unit 8: Polishing unit Number of motors: 2 Motor power: 0.18 kW Speed: 1,370 rpm MACHINE DETAILS Control system: WINDOWS XP Machine control software: POWER CONTROL PC22 The machine is sold and delivered in its actual legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 8453

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, mašinos/transporto priemonės numeris: 0-250-23-0021, Funkcionalumas: visiškai funkcionalus, ruošinio ilgis (maks.): 2 500 mm, ruošinio plotis (maks.): 1 000 mm, ruošinio aukštis (maks.): 80 mm, X ašies padavimo greitis: 138 m/min, Y ašies padavimo greitis: 80 m/min, Pateikus pasiūlymą, įsipareigojama laiku atsiimti iki 2026-06-15! TECHNINIAI DUOMENYS X ašies greitis: 138 m/min Y ašies greitis: 80 m/min Z ašies greitis: 50 m/min Ruoinio ilgis: 300–2 500 mm Ruoinio plotis: 100–1 000 mm Ruoinio aukštis: 4–80 mm ĮRENGINIO DUOMENYS Valdymas: power control PC 85 T Matmenys (I x P x A): 6 500 × 2 300 × 2 700 mm Gbodpoy Sad Hsfx Aa Uel Elektra: 3 × 415 V / 50 Hz Galia: 19,5 kW Saugiklis: 50 A Pneumatika: min. 7 bar Oro suvartojimas: 2 500 NL/min Ištraukimo jungtis: 2 × 280 mm Ištraukimo našumas: min. 4 450 m³/h

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Used 5-axis CNC machining center Manufacturer: Homag Model: Centateq 110 (5-axis) Year of manufacture: 2021 Last manufacturer service: 18.05.2026 Console table with LED vacuum cup position display, 6 manually adjustable consoles (length 1360 mm) each with 3 vacuum cups, 4 support rails Workpiece clamping via vacuum pump 63 m³/h LED system for vacuum clamps, X-axis working range: 3100 mm Y-axis working range: up to 1250 mm with front stop; up to 1405 mm at the rear with 25 mm tool diameter Z-axis working range: 260 mm / 160 mm with standard vacuum cups Drilling head with 12 vertical spindles; 6 (4+2) horizontal drilling spindles Grooving saw, 90° pivotable, max. 125 mm diameter Main spindle DRIVE Future 10 kW, liquid-cooled, 1500 – 24,000 rpm 14-position tool changer (carousel) at the rear and 10-position fixed linear tool changer on the side Carrier for 2 Z-axes (main spindle + drilling gearbox) Chip conveyor, program-controlled extraction hood Control: Power-Control PC 86 POWERTOUCH with Woodwop (incl. Lamello CLAMEX-P component) WoodWop also available for workstation (Office Professional version; Basic DXF Import) UPS for PC; Tapio Ready-capable Gsdpfx Aasy Nzc So Uebl Basic barcode reading system Documentation: German The tools shown, HSK tool holders, drills, etc. are not included in the scope of delivery! Machine available from the end of May 2026 The attached PDF file in the appendix on the machine description relates to the machine’s original delivery condition from the manufacturer in 2021 and is not binding for the current delivery condition as a used machine.

Būklė: naudotas, mašinos/transporto priemonės numeris: 008522, 1 pozicija: HOMAG robotas + KUKA-KFL10 + KR 2 pozicija: Vienpusė briaunų klijavimo staklė HOMAG + KUKA-KFL10 + KR Gsdpfx Ajy Nx U Eoa Ujbl 3 pozicija: HOMAG robotas + KUKA-KFL10 + KR 4 pozicija: Plokščių grąžinimo įrenginys HOMAG + KUKA-KFL10 + KR

Būklė: naudotas, mašinos/transporto priemonės numeris: 008323, Uždedamos briaunos tipas: plona briauna, stora briauna, masyvi mediena Klijavimo sistema: EVA, PUR Sujungimo frezavimas: taip Multifunkcinis agregatas: taip Maks. padavimo greitis: 20 m/min Maksimali plokštės storis: 60 mm Godpfsx Hpkxox Aa Uebl Darbiniai agregatai: 7 vnt.

Būklė: naudotas, mašinos/transporto priemonės numeris: 008526, Darbinis plotas X ašis: 4000 mm Darbinis plotas Y ašis: 1100 mm Darbo paviršius: Su vakuuminėmis konsolėmis Pagrindinio veleno galia: 12 kW Godpfjy Nx Ulsx Aa Uebl Valdomų ašių kiekis: 5 ašių Gręžimo velenų kiekis: 35 Įrankių pozicijų skaičius: 29

Būklė: naudotas, mašinos/transporto priemonės numeris: 008324, Didžiausias plokštės plotis: 1000 mm Gedpfxjx Hpkre Aa Uobl Didžiausias plokštės ilgis: 2500 mm Konvejerio ilgis: 7000 mm Grąžinimo įrenginys kraštų klijavimo staklei: dešinėje