Diskinis pjūklas HOLZKRAFT sc 3c 26 - Parodos mašina -

HOLZKRAFT sc 3c 26

Sąlyga: naujas, - New - - Cutting level directly on the sliding table - Heavy-duty steel and cast iron construction - Precision-guided aluminum sliding table, standard anodized - Large support table extension mounted on a telescopic arm, longitudinally adjustable - Extendable aluminum telescopic fence, angle-adjustable with professional stop flaps - Parallel fence with quick release and fine adjustment - Large worktable made of machined cast iron remains perfectly flat over time - Standard table extension and table widening enable easy handling of larger workpieces - Smooth running and precise cuts - Equipped with a powerful three-phase motor - The large-dimensioned saw unit made of cast iron is doubly mounted to the cast table and guarantees stability, precision, smooth operation and long service life - Maximum cutting height is achieved even with scoring unit installed Made in Italy Equipment Details: Double trunnion saw unit - Large dimensions, made of steel/cast iron - Close to the saw blade, supported on both sides for precision, smoothness and durability - Height and tilt adjustable up to 45° via handwheel - Maximum cutting height also achievable with scoring unit installed - Also available with a scoring saw unit Telescopic Fence - Extendable telescopic fence up to max. 2550 mm - Angle-adjustable - With professional stop flaps Aluminum Sliding Table - Time-tested ball contact system, proven thousands of times - Resistant to dust and dirt, owing to minimal contact area between balls and trapezoidal rail - 10-year Holzkraft warranty against wear on the guideways Parallel Fence with Round Bar Guidance - With fine adjustment and quick locking - Stable round bar guidance made of precision-ground steel, 45 mm diameter - Standard fold-down mechanism for cutting large workpieces Technical Data: Dimensions and Weight Weight approx. 385 kg Dust Extraction Connector Extraction port diameter 120 mm Extraction port diameter saw blade guard 60 mm Electrical Data Drive motor power 5.0 kW Supply voltage 400 V Sliding Table and Table Sliding table length 2600 mm Sliding table width 270 mm Sliding table height 124 mm Table length 840 mm Table width 560 mm Table height 900 mm Saw Unit Cutting width with parallel fence 900 mm Max. crosscut width left of saw blade 2310 mm Edging length 2600 mm Saw blade tilt 90 - 45° Max. cutting height at 90° 90 mm Max. cutting height at 45° 63 mm (Main) saw blade diameter 315 mm (Main) saw blade speed 4000 rpm VPE 1 Scope of Delivery: Table extension and table widening Anodized aluminum sliding table Aluminum folding stops Parallel fence with round bar guidance and fine adjustment Cedpfxsvyupzo Admjaa Art. No. 5504326

Sąlyga: naujas, Gamybos metai: 2025, Cut-Off and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, Saw tiltable via handwheel and worm gear (back side) Saw blade diameter: 520 mm, saw blade bore: 50 mm Blade speed: 2800 rpm 400 volts / 5 kW (S6/40%) motor with brake and automatic star-delta switch g Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees (swiveled): 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees tilted: 140 mm Saw can swivel to one side to approx. 25 degrees for acute angles and tilt left up to 30 degrees for flat angles TCT circular saw blade 520x4.0/2.8x50 mm 60 teeth WZ neg. for wood RLH-ST60 6.0 meter measuring length, mounting side: left Length stop / roller conveyor, heavy-duty design, Stop slider adjustable from operator position via handwheel, electronic-digital measurement display, stop slider pneumatically clamped, flip-away stop flap to the rear, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 m Surcharge for digital electronic display unit Type: FIAMA EP6 for 230 V mains operation, with electrical on/off switch and socket. Powerful dark red LED display. Higher accuracy compared to battery-powered crystal display RO-ST60 4.0 meter infeed roller conveyor Codek H Ic Uepfx Admoaa Mounting side: right Heavy-duty design, steel rollers: 60 mm diameter, roller spacing: 200 mm, 400 mm roller width, 3 support feet and connection piece Location: Ex stock 54634 Bitburg - immediately available - Image: similar. Machine is still in its original packaging

Sąlyga: beveik kaip naujas (parodų įrenginys), 1 roller table, 3.0 m long x 0.77 m wide, equipped with 7 carrying rollers, pneumatic lifting alignment chain with worm gear and bellows cylinder, plus a wood transfer carriage with rubber turntable for single-person wood handling, and 2 foldable stop rollers for planks from the band saw that have already been edged on one side. Cajdot E Nw Topfx Admja 1 roller table, 3.5 m long x 0.77 m wide, with 8 carrying rollers, available with or without transfer carriage. Other similar roller tables available.

Sąlyga: naujas, Gamybos metai: 2024, Max. edge thickness: 3 mm (optionally up to 8 mm) Min/Max. workpiece thickness: 8 - 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Whispercut jointing unit Corner rounding unit, radius R = 2 mm Csdpfx Adog Tu Rkomoaa Quick-change device for corner rounding unit Radius changeover motor EF R = 1 mm Multi-radius scraper (R1/R2) Chassis Release agent spraying unit Cleaning agent spraying unit Edge protection spray Nesting Pneumatic 3-point adjustment Multi-function cutter (R2/R1/chamfer) Equipment for short workpieces

Sąlyga: naujas, Gamybos metai: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Cajdpfjhp Rcrsx Admsa Milling spindle with forward and reverse rotation Large, cast-iron milling unit mounted directly to the table Under-table extraction hood for improved dust extraction Solid and precise cast iron table Fast and straightforward speed change Powerful 5.0 kW motor Standard curved milling guard Quality made in Italy Equipment Details Cast iron milling unit Directly mounted onto the milling table Milling spindle mounted with high-precision ball bearings in the upper position for minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful Motors Equipped with a high-performance three-phase motor Milling Guard The standard milling guard is supplied as standard for maximum safety, featuring a height-adjustable fence and protective cover. Milling Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw The integrated extraction port ensures an unobstructed view Milling Table Opening A large table opening allows the use of larger panel cutters, tenoning, and slotting tools above and below the table Curved Milling Guard Included as standard Reversible Fence Jaws Versatile, integrated fence to bridge the tool gap enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and Weight Weight (net) approx. 240 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation Information Required length: 1,945 mm Machine body width/depth: 575 mm Required width/depth: 920 mm Working area length: 1,600 mm Explanation required space: The dimensions take into account the maximum travel distances or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Explanation working area: Please add the specified dimensions to the required space to calculate the recommended free setup area for the machine. Electrical Data Supply voltage: 400 V Drive motor power: 5.0 kW Mains frequency: 50 Hz Milling Spindle Usable spindle length: 100 mm Spindle speeds: 3,500/7,000/10,000 rpm Max. spindle protrusion above table: 130 mm Spindle shaft diameter: 30 mm Max. milling tool diameter Max. sinkable tool diameter: 180 mm SCOPE OF DELIVERY Curved milling guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Sąlyga: naujas, Mobile warehouses are designed to increase the logistics and production capacities of any company, providing new covered spaces suitable for various logistics solutions such as permanent or temporary goods storage, creation of new production or service areas, covering loading/unloading zones, as well as sheltering vehicles and machinery, across all business sectors. Codpfx Aot Ef T Dedmjaa

Sąlyga: naudotas, Gamybos metai: 2023, keliamoji galia: 5 000 kg, kėlimo aukštis: 3 770 mm, bendras ilgis: 5 930 mm, Diesel forklift Linde H 50D-01/600 Drive type: diesel Cajdpfx Ajxd El Rsdmsa Year of manufacture: 2023 Lifting height (mm): 3,770 Load capacity (kg): 5,000

Sąlyga: naujas, Tipas: RP630 Darbinis plotis: 630 mm Mažiausias apdirbamas ilgis: 500 mm Darbinis storis: 3–110 mm Padavimo greitis: 6–30 m/min Bendra variklių galia: 9,25 kW Agregato variklis: 7,5 kW Padavimo variklis: 1,5 kW Kėlimo variklis: 0,25 kW Volelio skersmuo: 190 mm Šlifavimo juostos dydis: 650x1920 mm Darbinis oro slėgis: 0,6 MPa Dulkių surinkimo įrenginio našumas: 4000 m³/h Transportavimo matmenys: 1200x1750x2400 mm Codpfx Adofhnx Njmeaa Svoris: 1100 kg

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, veikimo valandos: 5 h, Funkcionalumas: visiškai funkcionalus, Birstinis šlifavimo įrenginys Gamintojas: Cosma Modelis: 300 H4 C Pagaminimo metai: 2023 (demonstracinė mašina su garantija!) Birstinis įrenginys profilinių juostų, pastolių lentų, profiliuotų medžiagų ir pan. 4 pusių šlifavimui. Darbinis aukštis: 900 mm Darbinis plotis, 4 pusių šlifavimas: 300 mm 2 cilindriniai birstų agregatai (viršuje ir apačioje), po 2,2 kW, 1000 aps./min. 2 šoniniai diskiniai birstų agregatai, po 0,37 kW, 750 aps./min., pasukami Agregatų aukščio reguliavimas rankiniu būdu Paduodamo greičio reguliavimas: apie 2–10 m/min Cjdpfxjwkqmpj Admsaa Valdymo pultas: -Birstų įjungimas/išjungimas -Transportavimo greičio reguliavimas Apdirbamo produkto matmenys: Minimalus ilgis: 800 mm Maksimalus plotis: 300 mm Aukštis: 20–100 mm

Sąlyga: naujas, Panel Saw HOLZKRAFT sc 2c - Display model - tiltable, parallel fence with fine adjustment ----- Technical specifications ----- Extraction port Ø: 120 / 60 mm, Working table height: 900 mm, Cjdpfju R Sy Nsx Admsaa Speeds: 4,000 rpm, Max. saw blade Ø: 315 mm, Cutting width with parallel fence: 900 mm, Cutting height 90/45°: 100 / 79 mm, Cutting length: 1,600 mm, Tilting range: 90 - 45°, Dimensions (LxW): 1,020 x 325 mm, Weight: 295 kg - New display machine -