Portalinis presas

Hidrobrasil Portal-Richtpresse

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, spaudimo jėga: 400 t, Portal Frame Straightening Press with 400 T Capacity Oil-hydraulic Double Column Press a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 60 mm/sec c) Table size 6000 x 3000 mm Godpfohyc Nwjx Acysip d) Clear opening height 1500 mm e) Overall dimensions (LxWxH) approx. 6000 x 5000 x 4500 mm f) Oil temperature display on tank g) Lubrication via grease nipples h) Table in grid/raster design i) Controls mounted on a swiveling arm attached to the bridge j) Pressure setting variable from 60 T to 400 T via monitor k) Bridge traverses via two geared motors, rack and pinion drive l) Cylinder moves left and right via rack and pinion m) Machine body powder-coated or double lacquered n) T-slots to customer specification o) Cylinder induction-hardened PORTAL PRESS Thermally neutral 80 – 120 °C Number of operator sides: 3 Forces Maximum pressing force: 4000 kN Maximum free opening force: 600 kN Pressure build-up time (closed tool, steel on steel): max. 3 sec. Dimensions Maximum opening width: 1500 mm Stroke and min. opening: 1500 mm / 0 mm Table height above floor approx. 900 mm Overall height above floor (installation height) approx. 4500 mm Min. hall height: 5500 mm Deflection Measured at maximum closing force, with 70% occupancy:

Būklė: naujas, Gamybos metai: 2026, bendras svoris: 1 000 kg, Geriausia kokybė 3D skylėtas stalas 3000 x 1500 x 200 mm, tinklelis 100 mm, plokštės storis 20 mm, skylės skersmuo 28 mm, Lygiu paviršiumi, itin masyvus, svoris apie 950 kg Su 6 kartus reguliuojama stalo koja Gsdpfx Asx Nihiecyjip Kaina be priedų, priemoka 500 € Supakuota medinėje dėžėje, siuntimas teiraujantis

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: -, spaudimo jėga: 40 t, This press is based on a proven and field-tested design, and can be newly manufactured at short notice as well as tailored specifically to your application. Inspection of the existing machine at the customer’s site is possible by prior arrangement. The press is suitable for straightening, assembly work, as well as for pressing in and pressing out operations. ### Technical Data – Frame * Pressing force: 40 t * Table usable area: 635 × 555 × 70 mm * Clearance between columns: 900 mm * Opening height (ram–table, max.): 500 mm * Distance table to floor: 1,200 mm * Overall dimensions (W × D × H): 1,880 × 900 × 2,300 mm * Total weight: approx. 1,500 kg * Frame: Welded steel frame --- ### Hydraulics – Cylinder * Piston stroke: 550 mm * Piston rod diameter: Ø 90 mm * Cylinder diameter: Ø 150 mm * Max. working pressure: 280 bar --- ### Hydraulics – Power Unit * Pump: ASC * Pump output: 12 l * Motor power: 4 kW * Return speed: 16 mm/s * Idle speed: 10 mm/s * Oil tank volume: 120 l * Hydraulic block / valves: Hydropack * Pressure display: Pressure gauge * Pressure adjustment: Adjustable * Pressure switch: Present * Power unit: Mounted on the side of the press --- ### Operation * Manual operation via adjustable hand lever valve * Sensitive speed control via lever position * Pressure adjustment via rotary knob --- ### Electrical Data * Main supply: 400 V AC * Control voltage: 24 V DC * Frequency: 50 Hz * Connection for main hydraulic motor: 4 kW * Total connected load: approx. 5 kW --- ### Control Cabinet / Electrical Equipment * Protection class: IP 54 * Spare space: approx. 30% * Cooling: No * Internal lighting: No * Mode selector switch: Yes, lockable * Electrical components: Siemens, Allen-Bradley, Sick --- ### Paint Finish * Frame / main body: RAL 7035 (light grey) * Power units & moving parts: RAL 7016 (anthracite grey) * Painting: 2-coat finish (primer + top coat) Gsdpfeyia D Rjx Acysip * Special colours: RAL colors freely selectable by arrangement --- ### Documentation & Standards * Documentation: German and English * Documentation delivered: * CE documentation * Spare parts lists * Electrical diagrams and parts lists (digital) * Guidelines & standards: * 2006/42/EC Machinery Directive * 2014/35/EU Low Voltage Directive * 2014/30/EU EMC Directive * EN ISO 16092-1 / -3 * EN 60204-1 * EN ISO 12100 * EN ISO 4413 --- ### Note The opening in the table was originally implemented at the express request of the customer. Alternatively, the press can be supplied with a closed steel plate, or with a steel plate with T-slots. The table design is adapted individually to the specific application. An integrated tool holder is provided in the ram. This enables the mounting of various press heads with diameters of up to 250 mm. Thus, the press can be flexibly adapted to changing tools and production processes. We are happy to advise you on a version tailored precisely to your production and application. Hydraulic workshop press, 40-t press, Durendus press, new hydraulic press, workshop press with table, assembly press, straightening press, insertion press, industrial workshop press, CE-compliant press, hydraulic press 400 V

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, spaudimo jėga: 200 t, Main Cylinder Press Capacity: 200 t - Max. Working Pressure: 285 bar - Cylinder Stroke: 1500 mm - Clear Width/Clear Height: 1500 mm - Distance Between Columns: 2050 mm - Max. Lateral Cylinder Travel: 1450 mm - Max. Longitudinal Frame Travel: 2800 mm - Table Plate Dimensions: 4000 × 2000 mm - Hydraulic Power Unit Output: 5.5 kW - Rapid Approach Speed: 20 mm/s - Working Speed: 2 mm/s - Hydraulic oil not included in scope of delivery - Hydraulic power packs mounted on top of the press - Hydraulic block and valves by Rexroth - Air filter brand: FILTREC - Oil filter brand: FILTREC - Air and water (cooler) cooling for hydraulic system - Stroke cylinders integrated into the working table Rod Diameter: 25 mm - Stroke: 80 mm - Control via cylinder controller or hydraulic unit (manual lever control) - 10 stroke cylinders will be installed - Digital control with travel measurement via encoder and pressure measurement with value output - Siemens touchscreen display KTP 900 – 9” for programming (up to 99 programs): - Maximum up/down stroke of cylinder - Pressure holding time under the table - Decompression time - Working pressure adjustment - Piece counter - Pre-stop up/down stroke with 0.1 mm accuracy - Alarm management - Frame-mounted display for real-time process parameter indication - Radio remote control with two buttons for simultaneous operation - Control cabinet with Siemens CPU - Hydraulic unit with solenoid valves (replaces hanging operator panel) - Air/oil heat exchanger with decompression valve 5. ELECTRICAL INSTALLATION AND SAFETY - PLC system from SIEMENS (S7-1200 series) - Siemens brand 9” LCD touchscreen MTP900 integrated in the control cabinet - Electrical components by SIEMENS, ALLEN BRADLEY, and PHOENIX Gisdpoxrb Nbsfx Acyop - System pressure of the hydraulic cylinder is adjustable via LCD touchscreen - Operating modes (semi-automatic and automatic), power, vertical stroke, and dwell time of the upper cylinder are programmable - 99 recipes can be stored, with all parameters programmable per recipe - Activation via radio remote control - Fitted with a double pushbutton for slow or fast up/down travel, emergency stop, and operation confirmation - Touch-sensitive safety edge fitted at the bottom of the gantry columns for safety - Control cabinet wall-mounted on side of the bridge - Anti-rotation lock for cylinder - Oil temperature displayed on the LCD touchscreen - Overheating warning for hydraulic oil shown on the LCD touchscreen - Filter contamination status shown on the LCD touchscreen - System errors displayed on the LCD touchscreen - Pressing status information shown on the LCD touchscreen - Once oil temperature reaches 45°C, the air cooler starts cooling the oil. At 65°C the machine halts operation until it cools back to operating temperature - Operating manual included - System complies with all essential safety and health requirements according to CE regulations.

Būklė: naujas, Gamybos metai: 2024, == Demonstration Machine == ALZMETALL Column Drilling Machine ALZSTAR 40 SV with Coolant System B (Option 25) (comprising separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine lamp Standard equipment: Mushroom-head emergency stop, reversing switch (for clockwise and counterclockwise operation), motor protection switch Stepless speed adjustment, digital speed display, Feed overload protection, protection class IP54, connection plug Spindle guard with electrical interlock Technical data: Drilling capacity steel E335 (St 60): 40 mm Tapping: Steel E335 (St 60): M24 Cast Iron EN-GJL-200 (GG20): M30 Short spindle: MK 3 Spindle stroke: 120 mm Throat depth: 293 mm Column diameter: 115 mm Machine table, usable surface: 514 x 360 mm T-slots, number x width x distance: 2 x 14 x 224 mm Distance spindle-table min./max.: 117/701 mm Feed: 0.10 + 0.20 mm/rev Machine height without options approx.: 1840 mm Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm Goded Hy Elspfx Acyjip

Būklė: naujas, Šachtinė krosnis, gamintojas VEI Tipas: SCO_EB Vidinis aukštis: 1200 mm Vidinis skersmuo: 1400 mm Išorinis skersmuo: 2200 mm Išorinis aukštis (be dangčio): 1650 mm Išorinis aukštis (su dangčiu): 2600 mm Elektrinis šildymas: 64,5 kW Cirkuliacinis ventiliatorius: 5,5 kW Trifazis prijungimas: 400 V, 50 Hz Temperatūra: maks. 750°C Giedpfx Acjg R Snhsysp

Būklė: geras (naudotas), Gamybos metai: 2000, bendras aukštis: 47 000 mm, bendras plotis: 27 000 mm, bendras ilgis: 25 000 mm, stalo plotis: 1 000 mm, stalo ilgis: 1 800 mm, bendras svoris: 43 000 kg, stūmoklio plokštės plotis: 600 mm, štampo pagalvėlės eiga: 200 mm, Control system Siemens Simatic OP 27 Light barrier by Sick Separate control cabinet by Rittal Side walkways/passages Floor-level installation Giedpetiwgiefx Acyop

Būklė: naujas, NEW MACHINE - Wet vacuum extraction available in steel or stainless steel - Extraction capacity: 1,650 / 3,750 / 7,000 m³/h - Motor: 3 / 5.5 / 15 kW Gjdpeci Tlrofx Acyeip

Būklė: labai geros būklės (naudotas), bendras plotis: 4 000 mm, bendras aukštis: 7 000 mm, tarpas tarp stulpų: 2 000 mm, lentyna ilgis: 900 mm, Įranga: dvipusis, Sudaryta iš 3 dvipusių kolonų, H 6000 mm. 9 lentynos su 750 mm ilgio svirtimis. Lentynos keliamoji galia – 900 kg. Aukšto keliamoji galia – 2700 kg. Vienos kolonos pusės keliamoji galia – 8100 kg. Kolonų tarpai – 2000 mm. Gjdpfoulufpox Acyoip

Gamybos metai: 1990, būklė: geras (naudotas), Used sideloader Kalmar, the machine has been well maintained For more details, see pictures Gjdpeh Et E Nofx Acysip