Maitintuvas

HESSE by COILTECH CMSS MINI 100

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Rated Load: 5,000 kN Threshold: Measurement starts at approx. 3% of rated load (approx. 150 kN) Resolution: 10 kN Measurement Accuracy: +/-0.5% of maximum reading (FS) Non-linearity: +/-0.3% FS Non-repeatability: +/-0.1% FS Temperature Range: 0°C to 70°C Temperature Effects On FS output: +/-0.001% FS/°C On zero-load output: None (automatic zero adjustment) Overload Capacity: 50% of rated load (7,500 kN) Measurement Speed: Three measurements per second Operating Modes: Peak value or dynamic measurement Strokes per Minute: Single-stroke device, automatic zeroing after each stroke Power Supply: Standard 9V block battery  Approx. 30 hours of continuous use  Battery change indicator included Dimensions: Approx. 230 mm (L) x 190 mm (W), height approx. 180 mm Prodjfpwk Rspfx Aaxea  Exact height: 7.0000 +/-0.0002” Weight: Approx. 32 kg, including carrying case Analog output included

Būklė: naudotas, Gamybos metai: 1986, Spaudimas 160 t Išsikišimas 360 mm Eiga 500 mm Nusileidimo greitis 200 mm/sek. Pakėlimo greitis 125 mm/sek. Max. atstumas stalas - stūmoklis 1000 mm Stalo matmenys 900 x 630 mm Podpfx Aaev Rgwxjxjra Stūmoklio matmenys 850 x 450 mm Tvirtinimo kaiščio skersmuo x gylis 50 H7 / 85 mm Bendras energijos poreikis 17 kW Staklių svoris apytiksl. 7 t Užimamas plotas apytiksl. IxPxA 1,25 x 2,2 x 3,45 m

Būklė: beveik kaip naujas (naudotas), Rated load: 2,500 kN Threshold: Measurement begins at approx. 3% of rated load (approx. 75 kN) Resolution: 10 kN Measurement accuracy: +/-0.5% of full scale (FS) Non-linearity: +/-0.3% FS Non-repeatability: +/-0.1% FS Temperature range: 0°C to 70°C Temperature effects On FS output: +/-0.001% FS/°C On zero load output: no effect (features automatic zero compensation) Overload capacity: 50% of rated load (3,750 kN) Measurement speed: Three measurements per second Predpsfpwmpefx Aaxea Operating modes: Peak value or continuous monitoring Cycles per minute: Single-stroke device, automatic zeroing with each stroke Power supply: Standard 9V block battery Approx. 30 hours of operation under continuous use Device features a battery change indicator Dimensions: approx. 185 mm (L) x 200 mm (W), height approx. 127 mm Height (exact): 5.0000 +/-0.0002" Weight: approx. 13 kg, including carrying case With analog output

Būklė: naujas, Gamybos metai: 2025, Band width: max. 38 mm Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Strokes: max. 260 1/min at full feed length Feed force: 90 N Available with mechanical control valve or optionally with electric valve (24V or 230V) Podpfe Ea U Hex Aaxjra Many other band widths and feed lengths available.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, galia: 11 kW (14,96 AG), įėjimo įtampa: 200 V, spaudimo jėga: 160 t, stalo ilgis: 600 mm, bendras svoris: 19 000 kg, perforavimo jėga: 160 t, aukščio reguliavimo tipas: elektrinis, įrengimo aukštis: 1 900 mm, hidraulinio cilindro reguliavimas: 100 mm, eigos reguliavimas: 130 mm, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, Manufacturer: AIDA Model: NC2-160 Prodpeu D Dhxsfx Aaxea Press force: 160 t Year of manufacture: approx. 1991 Stroke length: 130 mm Shut height (adjustable): 285–335 mm Table size: 1900 x 600 mm Ram size: 1360 x 585 mm Electrical power: 3x200V (!!), 15 kW – Japanese standard Net weight: 19,000 kg Dimensions: 2140 x 2210 x 3175 mm Automatic lubrication system. Optional with decoiler and straightening machine.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, galia: 15 kW (20,39 AG), įėjimo įtampa: 200 V, įvesties srovės tipas: trifazis, spaudimo jėga: 160 t, stalo plotis: 600 mm, stalo ilgis: 2 030 mm, bendras svoris: 19 000 kg, paskutinio kapitalinio remonto metai: 2020, perforavimo jėga: 160 t, hidraulinio cilindro reguliavimas: 130 mm, Įranga: apsaugos šviesos užtvara, Gamintojas: AIDA NC2-160 (1) Spaudimo jėga: 160 t Pagaminimo metai: apie 1986 Eigos ilgis: 130 mm Atstumas virš stalo: (reguliuojamas) 235–335 mm Stalo dydis: 2030 x 600 mm Slankiklio dydis: 1500 x 600 mm Reakcijos laikas: 240 ms Su šlapia sankaba ir stabdžiu Hidraulinė perkrovos apsauga Motorizuotas slankiklio reguliavimas Apsisukimų reguliavimas Elektros galia: 3 x 200 V (!!), 15 kW – Japonijos standartas Pedpfou D Ad Esx Aaxora Grynoji masė: 19 000 kg Matmenys: 2140 x 2210 x 3175 mm Automatinė tepimo sistema Automatinis pjovimo alyvos dozavimas – RAZIOL EST-02 Papildomai galima su lakštų padavimu ir tiesinimo įrenginiu

Būklė: naudotas, Gamybos metai: 1984, Material width: 350 mm Coil weight: 1 t Material thickness: 0.5 - 6 mm Coil inner diameter: 380 - 540 mm Pedot Hmk Topfx Aaxjra Coil outer diameter: 1500 mm Number of straightening rollers: 9 Straightening roller diameter: 30 mm Number of feed rollers: 2 Weight of straightening machine: 2 t Space requirement for straightening machine (W x D x H): 2.0 x 2.0 x 1.9 m Weight of decoiler: 1.3 t Space requirement for decoiler (W x D x H): 1.7 x 1.5 x 1.6 m

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2020, spaudimo jėga: 500 t, SORG Four-Column Press – 500 t – 1,100 × 800 mm – Calibration Press For sale is a hydraulic four-column press (calibration press) manufactured by SORG with a pressing force of 500 t. This machine is designed for precise calibration and forming processes, offering high repeat accuracy alongside rapid cycle times. Thanks to its robust construction and powerful hydraulics, it is ideally suited for industrial series production and demanding precision applications. ==== Technical Data & Information: Hydraulic Four-Column Press – Calibration Press – 500 t ==== General Information - Manufacturer: SORG - Model: Four-Column Press - Machine designation: Calibration Press - Type: Four-Column Press - Press force: 500 t - Machine weight: approx. 22.8 t - Height above floor: approx. 5,100 mm - Minimum hall height: 6,500 mm ==== Working Area - Clearance width: 1,100 mm - Installation height: 800 mm - Stroke: 600 mm - Table height above floor: 900 mm ==== Table & Ram - Table area: 1,100 × 800 mm - Ram area: 1,100 × 800 mm - Max. tool weight: 2,000 kg - Max. upper tool weight: 1,000 kg ==== Speeds - Closing speed: 60–200 mm/sec Predpfeffamvox Aaxsa - Pressing speed: 0–9.5 mm/sec - Opening speed: 28–200 mm/sec ==== Hydraulics & Power - Hydraulic pressure: 300 bar - Main motor: 75 kW - Pump capacity: approx. 270 l/min - Oil tank: 600 l - Number of press cylinders: 1 unit - Number of travel cylinders: 2 units ==== Control & Safety - Control: Siemens S7 - Safety control: Pilz Multi - Precise pressure and motion control for calibration processes ==== Application & Features - High repeat accuracy - Suitable for calibration, pressing, and forming processes - Robust construction for continuous operation ===== Calibration, forming, series production, precision forming, toolmaking Hydraulic press, calibrating press, four-column press, forming press, industrial press, production press Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German and European machinery directives (Directive 2006/42/EC), as well as EC standards and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they fully comply with Brazil’s national safety directive NR 12, which builds on these standards. Our strongest assets are custom machine construction and press automation. We offer tailor-made hydraulic presses at surprisingly competitive prices. The hydraulics of our presses predominantly use components from leading European manufacturers.

Būklė: naudotas, Gamybos metai: 2021, mašinos/transporto priemonės numeris: HB 2022-A-073, spaudimo jėga: 300 t, Portal Straightening Press – Manufacturer Hidrobrasil – 300 t Gantry Press – Table 2,500 × 1,600 mm For sale is a powerful portal straightening press from Hidrobrasil, featuring a press force of 300 t. The machine is equipped with a movable bridge design, laterally traversing cylinder, and a robust grid table, making it ideal for precise straightening, assembly, and heavy-duty applications. ===== Technical Data & Information: Portal Straightening Press Hidrobrasil – 300 t Gantry Press ==== General Information - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry Press / Double Column Press - Press Force: 300 t (3,000 kN) Podsh Agnuspfx Aaxora - Machine Weight: approx. 22 t - Dimensions (L × W × H): 4,500 × 2,300 × 3,700 mm ==== Working Area - Table Size: 2,500 × 1,600 mm - Daylight Opening: 700 mm - Stroke: 700 mm - Table Height: approx. 900 mm ==== Construction & Equipment - Movable bridge via rack-and-pinion with two geared motors - Cylinder traverses laterally via rack-and-pinion - Grid-structured table - T-slots as per customer request (standard: 22 mm) - Induction-hardened cylinder - Machine body double coated - Lubrication via grease nipples - Operation via pivoting arm on the bridge - Pressure adjustment via monitor (50 – 300 t) - Oil temperature display on tank ==== Power & Accuracy - Free lifting force: 500 kN - Pressure accuracy: ± 5 bar - Deflection: ≤ 0.8 mm/m (at 70% load) - Pressure build-up time: max. 3 s (steel on steel) ==== Speeds - Pressing speed: approx. 8 mm/s - Fast stroke (closing): 17 mm/s - Opening speed: up to 55 mm/s ==== Hydraulics - Main pump: Bosch Rexroth, approx. 93 l/min - Operating pressure: max. 350 bar - Oil volume: approx. 900 l (HLPD 46) - Ambient temperature: max. 45 °C - Oil temperature: max. 55 °C - Number of cylinders: 1 ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Motor power: 22 kW (IE3) - Total connected load: approx. 30 kW ==== Further Information - Thermal working range: 80 – 120 °C - Operating sides: 3 - Sound pressure level: max. 78 dB(A) - Minimum hall height: 5,000 mm ===== Straightening tasks, assembly work, heavy-duty processing, forming technology, steel construction, toolmaking, maintenance Gantry press, straightening press, double column press, hydraulic press, industrial press, tool tryout press Looking for a hydraulic press tailored to your requirements? Contact us for an individual quote. Our hydraulic presses are manufactured in accordance with German Machinery Directives, European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses surpass Canadian and European safety standards as they comply in all respects with the Brazilian National Safety Regulation NR 12, which is based on these standards. Our key strength is custom machine construction and press automation. We supply customized hydraulic presses at surprisingly attractive prices. For the hydraulics, we mainly use components from leading European manufacturers.

Gamybos metai: 1980, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 3253-80, Offer 22045 Technical data (approx.): - Pressing force: 10 t - Throat depth: 150 mm Pjdjktg Dhjpfx Aaxora - Table size: 520 x 320 mm - Table height adjustment: 160 mm - Clearance hole in table: 165 x 125 mm - Max. installation height: 220 mm - Ram surface: 240 x 150 mm - Pin hole in ram: 30 mm - Ram adjustability: 40 mm - Stroke adjustment: 4 – 60 mm - Strokes per minute: 130 1/min - Hydraulically actuated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive: 380 V / 1.1 kW - Required space (approx.): W 1000 x H 1800 x D 1100 mm - Weight (approx.): 1300 kg