Puodelio diržo gręžimo staklės

Hess mit vielen einstellbaren Anschlägen

Būklė: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW Ncedpfx Aaorigxyo Uju - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition

Būklė: naudotas, Gamybos metai: 2018, Edgebanding Machine AKV 3006 DK - F with Jointing Unit including DIA tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combination milling station radius R 2.5 mm. Technical Description: - Application of hotmelt adhesive to the workpiece for edge material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable insert cutters (combination version), fine adjustment of the cutter from the operator side - Free slots for additional processing aggregates (Hebrock System) - Feed rate approx. 10 m/min - Cutting depth adjustment for the crosscut saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate viewing windows from the rear and operator side - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg (depending on equipment) - Dimensions (L x W x H): 5,250 x 1,445 x 1,600 mm Airtronic including cooling and antistatic spray device (built 2014) - 1 pc. hot air unit for producing optical zero joint when using the appropriate edge materials - Incl. pneumatic glue pot positioning - Incl. cooling and antistatic spray device - Incl. 2 additional quick-change edge channels - Incl. special corner rounding trimming unit, max. workpiece thickness 60 mm, min. workpiece length 200 mm Ncsdpfxex S Hmze Aa Ueu - Exclusively for Hebrock edgebanders of the 3000 series - Retrofitting possible – extra costs upon request - Technical data: max. panel thickness 40 mm, edge thickness 1.2 – 2.0 mm, 7 – 10 m/min feed speed, air consumption approx. 280 – 580 l/min (Airtronic only), electronically controlled, ready for operation after approx. 2 min Upgrade to 8 mm edge thickness: - 1 pc for max. workpiece thickness 40 mm - Incl. pneumatic saw adjustment, special version for min. workpiece thickness 8 mm - 1 pc 3-point pneumatic milling adjustment - 1 pc switching for radius – chamfer – flush for the combination milling stations, eliminating manual adjustment for the third stop position (PLC control required) - Buffing station (polishing wheel) 1 pc - Corner rounding trimming unit 1 pc incl. combination tool and pneumatic setting for chamfer/radius, max. workpiece thickness 40 mm, min. workpiece length 300 mm, radius R 2.0 mm - Radius scraper 1 pc incl. pneumatic lifting device, radius R 2.0 mm - Surface scraper 1 pc with pneumatic engagement control - Complete chassis 1 pc - Glue station change system incl. glue discharge device downward (preparation) 1 pc; without second glue pot – includes the ability to process PU adhesives - Groove saw unit vertical in the panel 1 pc incl. pneumatic lifting device, vertical groove, groove width 8.2 mm, groove depth 8.0 mm, distance from panel edge 14.0 mm - Special version groove saw motor with higher power - Extraction unit for jointing aggregate (internal) 1 pc at the machine's extraction manifold - Ball bearing for corner rounding cutter 24.1 mm 1 pc - Ball bearing for corner rounding cutter 24.2 mm 1 pc - Protective agent spray device 1 pc for edge surfaces on sensitive edge materials - Combined spray device for panel (separating and cleaning agent spraying) Location: Supplier’s stock

Būklė: naudotas, No. 3176 WEINIG Hydromat 1000 Planer and Moulder Used, Year of manufacture: 2007 6 spindles: bottom – right – left – top – top – bottom Electronic feed: 6 – 60 m/min Working width: 80 – 150 mm Working height: 23 – 65 mm Finished lamella width: 4 – 15 mm Max. number of lamellas: 16 pcs Lamella length: 400 – 4000 mm 1st spindle, horizontal bottom Brake motor 11 kW, 6000 rpm Spindle diameter: 45 mm Tool diameter: 125 – 180 mm 2nd spindle, vertical right Brake motor 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle, vertical left 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of the spindle, swivelling, pneumatically loaded roller 4th spindle, horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool diameter: 112 – 250 mm Nsdpfxju Agh Sj Aa Uscu Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 5th spindle, horizontal top as saw spindle Brake motor 37 kW, 5000 rpm Diameter: 45 mm Reduced axial adjustment to 25 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 6th spindle, horizontal bottom as saw spindle Brake motor 30 kW, 5000 rpm Reduced axial adjustment to 25 mm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm All moulder spindles equipped with high-performance bearings Electronic feed, 7.5 kW Feed rollers adjustable axially by 35 mm relative to the left spindle Reduced roller spacing opposite the right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, serrated roller in the table, side pressure roller Automatic Waxilit pump / Lubrication pump Machine with 4-roller outfeed, extended universal joint shafts to 200 mm 2 driven, serrated rollers in the outfeed table 2 driven, serrated rollers in the machine table Pressure beam before and material removal after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electrically adjustable height for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Errors in description and price are excepted Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; applies: 'purchased as inspected' Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Būklė: geras (naudotas), Straight-line edging machine; for grinding and fine polishing of straight edges, mitres, and bevels. Specifications: Nedju U H H Ajpfx Aa Uscu • Glass thickness: 3-25 mm • Minimum dimensions: 80 x 120 mm • Maximum dimensions: 3 x 3 meters • Mitre angles: 0-60° • Power: 15 kW • Dimensions: Length 6.5 meters • Width with water tank: 1.6 meters • Height: 2.5 meters • Feed speed: 0.4 – 4.2 m/min. • Weight: 2,600 kg Price on request

Gamybos metai: 1985, būklė: geras (naudotas), Offer 22556 Technical Data: - Saw blade diameter: 420 mm - Saw blade bore: 30 mm - Maximum cutting length: 3000 mm - Minimum cutting length at 90° + 45°: 335 mm - Cutting range: see attached diagram - Swivel range inward (manual): 90° to 22.5° - Tilt range inward (manual): 90° to 45° - Saw blade speed: 2,800 rpm - Drive: 380 V / 2 x 4,000 W - Compressed air connection: 7 bar - Air consumption per working cycle: approx. 64 l - Required space: approx. W 4,500 x H 1,950 x D 1,600 mm - Weight: approx. 1,400 kg Includes: - Cutting length adjustment with position controller - Position controller replaced in approx. 2002 by WOLFF Nedpfx Aaoimdlrs Ujcu - Saw unit can be swiveled and tilted for processing high and wide profiles, as well as compound (bevel) cuts

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 942, bendras ilgis: 9 170 mm, bendras plotis: 1 635 mm, bendras aukštis: 3 100 mm, bendras svoris: 4 140 kg, įėjimo srovė: 44 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, galia: 21 kW (28,55 AG), ruošinio svoris (maks.): 800 kg, slėgis: 7 juosta, Lattuada TL10 AV C tiesiarėmė briaunavimo staklės su siūleliu pjovimu 0-45°, ceriumas. Atnaujinta mūsų sandėlyje Belgijoje. Išbandyta ir paruošta naudojimui. Ncjdpfx Aaow U Nzro Usu

Būklė: geras (naudotas), Gamybos metai: 2008, Vertikali stiklo briaunų šlifavimo mašina su 10 taurėmis ratais, reguliuojamas kampas 0-45°. Apdirbtų metrų skaičius: 179 000. Minimali stiklo aukštis: 70 mm. Greitis: 0,5 – 5 m/min. Stiklo storis: 3 – 50 mm. Mašinos matmenys (I x P x A): 8,8 x 1,2 x 3 m. Svoris: 4 300 kg. Ncsdpfx Ajx Hvxpea Usu

Būklė: nepatikrintas (naudotas), Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single Wood Sanding Machine Ø Sanding from below/above Ø With 2 offset sanding units each (below and above) Ø Sanding units (below and above) arranged in series according to the planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finishing) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper feed units Ø Oscillating use of sanding belts (during the sanding process) Ø Absolute power connection via 5.5 kW motors and large-dimensioned drive drums Ø Oxide-ceramic sanding shoe for: - precise surface geometry - no need for readjustment - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy-duty welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration damping. Offset sanding units with large-scale belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust, with sealing brushes and integrated sanding belt air-blast system to extend sanding belt service life. Sanding units made from heavy steel plate design as a basis for vibration-damped, smooth belt running. Absolutely backlash-free guides using ball linear sets made from hardened and ground shafts. Height adjustment of sanding units via hardened and ground special linear guides and preloaded guide carriages. Lasting precision due to dust and dirt protection of the ball linear sets and guide carriages. Large-diameter pre-sanding rollers serve as contact rollers. Contact rollers and sanding shoes are optimally matched to the sanding belt grit load. Ncsdet Tqy Ejpfx Aa Usu The large-dimensioned drive drums guarantee full transmission of the sanding motors’ 5.5 kW output to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation. This enables maximum stock removal. Automatic machine stop trigger in the event of belt breakage. Optical indicator at the control panel and machine warning beacon. Finishing sanding shoes are completely maintenance- and wear-free, made from oxide-ceramic for optimal heat dissipation. Sanding belt tension by appropriately dimensioned pressure springs. Sanding belt release for belt changes using a pneumatic system for sensitive, distortion-free installation of new belts. Upper sanding unit and brushing device are centrally motorized, height-adjustable with digital display at the control panel for motorized sanding thickness adjustment. Integrated brushing and finishing device for improved surface finish, built into the main machine. Two vertically-aligned special brush rollers, 150 mm diameter, operating in the same direction as the feed. Separate height adjustment of the brush rollers using precise slide guides for wear compensation. Additional conveyor roller for removing or further transporting the workpiece out of the sanding machine, coupled with the transport belt. Wood guide at entry for hard, double-sided...

Būklė: naudotas, Gamybos metai: 2000, For fully automatic assembly of frame components. Njded H Irfspfx Aa Uecu Frame external dimensions: min. 120 x 120 mm, max. 1050 x 2,500 mm 2 heating rails

Būklė: geras (naudotas), Nenutrūkstamo ciklo karšto spaudimo presas faneravimui, baldams, durims, plokštėms, kompozitinėms medžiagoms ir įvairioms kitoms reikmėms. Maksimalus darbinis ilgis: 3300 mm Maksimalus darbinis plotis: 1800 mm Atidarymas: 200 mm 6 stūmokliai, 100 mm skersmens Ncsdpfox I Nz Hsx Aa Usu Tvirti presavimo stalai Diaterminio aliejaus šildymas Pakrovimo konvejeris