Frezavimo staklė

Hermle UWF 900E

Būklė: geras (naudotas), Gamybos metai: 1995, Valdymas: HEIDENHAIN TNC 415 B Eigos diapazonas: X= 600, Y= 400, Z= 420 mm Sūkiai: 20 – 4000 aps./min Pavarų pakopos: 3 Dedpfx Afsw Uin Ss Aocg Tvirtinimas: SK 40 Pinolės eiga: 75 mm Veleno variklis: 5,9 kW Paleidimo greitis: 1 – 5000/6000 mm/min (rankinis/programinis) Greita eiga x, y: 7 m/min Greita eiga z: 6 m/min Tvirtinimo paviršius: 900 x 458 mm Svoris: apie 2300 kg Su aušinimo įranga, elektrine rankenėle, įvairiais įrankiais (be spintelės)

Būklė: geras (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 1 050 mm, padavimo eiga Y ašimi: 360 mm, padavimo ilgis Z ašis: 500 mm, X ašies eiga: 1 050 mm, Y ašies eiga: 360 mm, Z ašies eigos atstumas: 500 mm, bendras svoris: 3 000 kg, Įranga: dokumentacija / vadovas, Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully operational. Axis movements are smooth, and the guideways are in good condition, featuring an automatic lubrication system. The table is well maintained and shows minimal signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, enabling work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Dcsdpfxsrqwbio Af Aeg Technical Specifications • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travels: ➢ X-axis (longitudinal): 1,050 mm ➢ Y-axis (cross): 360 mm ➢ Z-axis (vertical): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed ranges: ➢ Vertical axis: 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 ÷ 1,550 rpm, 12 speeds • Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm • Variable feed rates ➢ Stepless (infinitely variable) feed: 0 ÷ 1,500 mm/min • Rapid traverse: ➢ X & Y axes: 3,000 mm/min ➢ Z axis: 1,500 mm/min • Universal milling head with 80 mm manual quill stroke • Automatic lubrication with electric pump • Low-voltage electric controls via side arm push-button panel • Star-delta starter • Siemens magnetic thermal overload protection • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories • Counter supports for milling arbor • Milling arbor ø32 mm

Būklė: naudotas, Table size 900 x 460 mm X/Y/Z travel – 600/400/420 mm Spindle speed 20–4000 rpm Spindle taper ISO 40 Dcsdpfol Dvx Eex Af Ajg Hydraulic tool clamping Tool changer with 32 stations Drilling stroke in vertical head 75 mm Swiveling vertical head +/- 90° Control: Heidenhain TNC 407 Equipped with: Machine vice 19 tool holders Coolant system

Būklė: naudotas, Gamybos metai: 1990, X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 420 mm Control: TNC 355 Heidenhain Dsdpjtqmm Aofx Af Aecg Main spindle: Speed range - main spindle: 20 - 4,000 rpm Drive power - main spindle: 7 kW Number of gear stages: 3 Tool holder: SK 40 Distance spindle / table: 127 - 567 mm Spindle diameter (front bearing): 55 mm Vertical quill stroke: 75 mm Tool clamping force: 10 kN Swiveling: +/- 90° Worktable: Table clamping surface: 900 x 458 mm T-slots: 7x 63 x 14H7 Feeds: Feed range: 1 - 5,000 mm/min Feed force: 5.4 kN Rapid traverse (X / Y / Z): 7 / 7 / 6 m/min Total connected load: 13 kW Machine weight: approx. 3.0 t Space requirement: approx. 4.0 x 4.0 x 2.1 m Universal Tool Milling Machine HERMLE - UWF 900 E - Swiveling spindle head +/- 90°

Būklė: naudotas, Gamybos metai: 1999, X-axis travel: 600 mm Y-axis travel: 525 mm Z-axis travel: 500 mm Table clamping surface: 1000 x 543 mm Spindle taper: SK 40 Spindle interface: DIN 69871 Spindle speed – stepless: 20 – 12,000 rpm Feed rates X/Y/Z axis: 20 – 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Maximum table load: 350 kg Control system: HEIDENHAIN MillPlus Djdpfxotqqmho Af Aecg Head swiveling: +/- 90° Total power requirement: 26 kVA Machine weight: approx. 4.2 t Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Accessories: various tool holders, coolant system

Būklė: geras (naudotas), Gamybos metai: 1991, Travel: X= 600, Y= 400, Z= 420 mm Speed range: 20 – 4000 rpm Number of gear steps: 3 Tool holder: SK 40 Quill stroke: 75 mm Spindle motor: 5.9 kW Feed range: 1 – 5000/6000 mm/min (manual/programmed) Rapid traverse x, y: 7 m/min Rapid traverse z: 6 m/min Clamping surface: 900 x 458 mm Weight: approx. 2300 kg Djdpswvif Usfx Af Ajcg With coolant system, electronic handwheel, measuring probe (defective)

Gamybos metai: 1989, būklė: naudotas, Control: Heidenhain TNC 355 Table size: 900 x 465 mm Travel: X-600 mm, Y-400 mm, Z-420 mm Dedpfx Aehd Rm Ujf Aecg Tool holder: SK 40 Quill stroke: 75 mm Speed range: 20–4000 rpm Feed rates: 1–5000 mm/min

Būklė: naudotas, Gamybos metai: 1985, x-axis travel 485 mm y-axis travel 385 mm z-axis travel 380 mm Clamping surface of table 800 x 460 mm Spindle taper SK 40 Control CONTOUR 1 Spindle speeds 50 - 2500 rpm Feed rates 10 - 1000 mm/min Rapid traverse 2 m/min Table load capacity 600 kg Quill stroke 80 mm Total power requirement 7.5 kW Machine weight approx. 2.0 t Dimensions L x W x H 2.4 x 1.7 x 1.98 m Accessories: vertical head with hydraulic tool clamping and retractable quill, fixed table, coolant system Dcjdpfxotqqllj Af Asg - Traversing in X/Y/Z also possible via handwheels -

Būklė: geras (naudotas), Sunkioji tekinimo staklės, tekinimo staklės, tekinimo suolas, su pagrindine ir traukos srieginėmis tekinimo staklėmis, su pagrindine ir traukos srieginėmis tekinimo suolas -Gamintojas: Strunguri Arad, su pagrindine ir traukos srieginėmis tekinimo staklės, tipas SNA560x2000 -Tekinimo ilgis: 2140 mm -Tekinamasis skersmuo virš lovos: 600 mm -Tekinamasis skersmuo virš stovo: 330 mm -Veleno anga: Ø 65 mm -Veleno sukimosi greitis: 16 - 1600 aps./min -Trijų žandikaulių griebtuvas: Ø 310 mm Dcedpfx Aoyaypkjf Ajg -Centro kūgis: MK5 -Pavaros variklis: 11 kW -Priedai: komplekte, žiūrėkite nuotraukas -Matmenys: 3700/1050/H1400 mm -Svoris: 3600 kg

Būklė: naudotas, Gamybos metai: 1998, Techninės detalės: Sukimosi skersmuo virš lovos: 600 mm Sukimosi skersmuo virš atramos: 400 mm Sukimosi ilgis: 2000 mm Centro aukštis virš atramos: 300 mm Centro atstumas: 1600 mm Sukimosi greičiai: 3 - 2.500 aps./min Grąžto laikiklio kūgis: MK 5 Pagrindinio veleno anga: 62 mm Pinolio eiga: 190 mm Išilginiai padavimai: apie 0,001–10 reguliuojamas mm/aps. Skersiniai padavimai: apie 0,001–5 reguliuojamas mm/aps. Greitasis padavimas X ašyje: iki 5000 m/min. Dodpfx Aow Rkt Ief Aecg Bendras galios poreikis: 40 KVA Mašinos svoris apie: 5,6 t Mašinos matmenys (IxPxA): apie 4,0 x 2,0 x 1,9 m Įskaitant priedus, žr. nuotrauką *