16 pirštinių frezų rinkinys

Herko Ø25 x 55mm R4

Gamybos metai: 1985, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 04.2187, Hydraulic Internal Broaching Machine in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985, overhauled Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Pulling force: 10,000 kg at 3 m/min Broaching speeds: hydraulically infinitely variable from 1 m/min to 7 m/min Return stroke speed: hydraulically infinitely variable from 7 m/min to 30 m/min Ihedpfx Aeixntwof Ijt Maximum stroke: 1200 mm Broaching tool clamping: universal pull head for flat shanks up to 26 mm width Maximum workpiece diameter: Ø max. 480 mm (limited by oil and chip tray) Table aperture: Ø 70 mm Power supply: 380 Volt / 50 Hz / 5 kW

Gamybos metai: 1983, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Holder diameter for pull heads: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically adjustable steplessly from 1 m/min up to max. 10 m/min Return speed: hydraulically adjustable steplessly from 5 to max. 25 m/min Ihedpfx Afsd Nb A Nj Iet Machine footprint (W x D x H): approx. 5500 x 2800 x 4900 mm (from pit base) Power supply / Connected load: 380 Volt, 50 Hz / 22 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated pull heads DIN 1417/18 to lock the broaching tools in the pull bridge. The needle lifting heads in the tool loader are hydraulically locked. The machine features a coolant system with integrated magnetic band chip conveyor for installation in a pit. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in series production; for optimal utilization, a foundation (pit) is ideally required. Pull heads and needle lifters are available on request. The machine can be inspected at our warehouse.

Sąlyga: labai geros būklės (naudotas), 16 end mills with indexable inserts Make: Walter Weight: 9.5 kg Ihsdpfx Ajdx D Tvof Iot

Sąlyga: naudotas, Diameter 5-20 mm Ihjdpfei Eg Rtex Af Ijt Length 10-200 mm Mount: Morse taper Various drilling, milling, and turning tools as well as other accessories. Drill bits, taps, and milling cutters: 30 EUR/kg Other accessories: 10 EUR/kg

Sąlyga: naudotas, Details on request Ihsdjb E Evbopfx Af Iot

Sąlyga: naujas, Gamybos metai: 2025, X ašies eiga: 1 520 mm, Y ašies eiga: 3 030 mm, Z ašies eigos atstumas: 300 mm, ruošinio svoris (maks.): 10 600 kg, bendras ilgis: 10 100 mm, bendras plotis: 2 500 mm, bendras aukštis: 4 500 mm, Maximale Bearbeitungsgröße: 3000×1500 mm Maximale Schnittstärke: Verarbeitbar ist ein Außendurchmesser von φ10–220 mm (Empfohlen: Rundrohr φ40–200, Vierkantrohr □40–200), Gewicht 20 kg/m Rohrschneidetyp: 6 m Automatikspannfutter Maximale kombinierte Geschwindigkeit: 150 m/min Ihodjv Awlqjpfx Af Ijt Beschleunigung: 2,5 G

Sąlyga: naudotas, Gamybos metai: 2000, Workpiece diameter – max. 40 mm Workpiece diameter – min. 10 mm Workpiece length: 200 – 640 mm Control: PLC Siemens S5 95 U Total connected load: 25 kW Machine weight approx. 5 t Required floor space approx. 8.5 x 2.8 x 2.35 m Hydraulic automatic cut-to-length and double-end machining unit, suitable for pre-processing trapezoidal threaded spindles as well as other round workpieces, via bar cutting and simultaneous end machining such as chamfering, facing, and drilling, with stationary parts and rotating tools. Ihedpfx Afjvp Sd Io Iot Machine consists of: - Base machine model TR 60/4-650, workpiece length up to 640 mm - Bar magazine for bar length 2 - 3.5 m - Standard version for solid material up to 40 mm diameter - Central position for bar feed rollers - Bar feeding unit - Standard version feed gripper - Rotary indexing table with 4 clamping stations, model TR 300.00 - 4 base jaws, width 80/140 mm, diameter 75 mm - Rotary indexing table pivotable in both directions - Saw unit with worm drive TR 200.00, stroke 100 mm - Saw blade 350 mm, speed 25/39 rpm - Motor power 2.6 / 3.2 kW - Motorized positioning of the saw head - Automatic positioning of the saw frame with hydraulic clamping - Saw blade guide - Machining unit no. 1 – USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid traverse 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 2 – USP.00/M - UF - Speeds 360/720 rpm, kW 1.8/2.8 - Working stroke 80 mm - Rapid traverse 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Thread cutting attachment for right and left handed threads - Machining unit no. 3 – USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid traverse 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 4 – USP.00/M - Speeds 943/1882 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid traverse 40 mm - Spindle mount ISA 40/M 16 - Discharge chute - Metric rulers for all adjustment movements - Hydraulic system with feed pump SAUER SUNDSTRAND - Accumulator - Rexroth flow controller for machining units and saw - Coolant system with filter and tank - Coolant pump CALPERA - Electrical installation in separate control cabinet, Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U - Machine light - Signal beacon for machine stoppage - Central lubrication - Chip conveyor In 2011, an extensive mechanical overhaul was carried out to optimize positioning and centering accuracy for €25,000. Additionally, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were also replaced. In recent years, the machine has seen very little use; the total operating hours are estimated by the seller at around 24,000. This is a used machine, therefore we sell under exclusion of any warranty. STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM.

Sąlyga: naudotas, Räummaschine Ihjdpst Hr Dfjfx Af Iot

Gamybos metai: 1999, Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Manufacturer: Arthur Klink Year of manufacture: 1999 Ihjdper A Hcbsfx Af Ist Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition, equipped with a tool lift system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Tool holder in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by the machine body of the tool tray) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine dimensions (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt, 50 Hz Connected load: 9 kW Equipment: • The machine has an electric control for the broaching stroke movement with both manual and automatic operation. • Integrated coolant/lubrication system • Tool lift system for flat broaching tools (no automatic feed) • The broaching slide with pull head holder is equipped with flat guides on both sides Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg) • Complete machine documentation, including CE declaration of conformity Remarks: The machine is ideal for manufacturing keyway slots. Thanks to its robust machine bed and the integrated tool lift system, it is especially well-suited for quick and easy use of flat broaching tools. The machine has had very limited use and is in near-new condition. The machine is available for inspection at our warehouse and can be demonstrated under power. Our direct contact details and further information about the machine can be found in the attached PDF document.

Sąlyga: naudotas, TOX Clinching Unit – Pneumatic-Hydro TOX Press Hydro-Pneumatic Press TOX Pressotechnik KRAFT PAKET Model: CRS 03.62 Serial No.: 207599.2 Year of manufacture: approx. 2005 Pressing force: max. 80 kN = 8 tons Throat depth: 20 mm Installation height: 32 mm - integrated clinching tool - pneumatic valve for actuation - for joining by mechanical interlock (clinching) - for creating a form-fit connection between two sheets without piercing or heating the material - mounted on stand - with basic electrical control and foot switch Net weight: 230 kg From a production line, sold without electrical control unit Iedpfx Afjdz Sqqo Ioht