Ekscentrinis presas - viena kolona

HENSEL EBU H 80 RIV (UVV)

Gamybos metai: 1990, Sąlyga: naudotas, Pressure: 75 t Pjdpfx Aod Nl E Usfwjgw Throat depth: 300 mm Stroke: 8 - 110 mm Table size: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Passage opening in table: 250 x 150 mm Ram bore: 40 mm Strokes per minute: 60 + 90 spm Machine weight: approx. 4.4 t Total power requirement: 4.5 - 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram at bottom stroke, ram down: 19 mm Distance table/ram at top stroke, ram up: 380 mm Equipment: - with hydraulic clutch-brake combination, new hydraulics and oil cooler - with gear drive in oil bath - fixed table prepared for attaching tool change consoles - 2 roller rails in table - mechanical overload in ram (shear plate) The following work will be carried out on the machine / partial refurbishment: - Machine will be completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine will be repainted - New Balluff cam switchgear - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication - New control cabinet with touch panel and ABB safety control - Current safety inspection (German UVV) including brake time measurement

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 51568, Pressure: 100 t Stroke: 0–500 mm Table area: 800 x 650 mm Ram area: 800 x 600 mm Pass-through opening in table: 355 mm Table height above floor: 800 mm Installation height: 1130 mm Machine weight approx.: 5.7 t Throat depth: 310 mm Space requirements (LxWxH): approx. 1.2 x 2.0 x 3.67 m Installation height specified at top stroke. Machine will be retrofitted to meet the latest safety regulations: Safety distance: 270 mm / Overrun speed measurement: 135 m/s, Overrun distance: 44 mm. Pgsdpscxxrrjfx Afwjw

Sąlyga: geras (naudotas), Gamybos metai: 2018, Swing diameter: 600 mm Turning diameter: 310 mm Turning diameter over support: 355 mm Spindle bore: 53 mm Bar capacity: 45 mm Speed range: 6,000 rpm Turning length: 388 mm Travel - Z axis: 400 mm Travel - X axis: 220 mm Turret (positions): 12 Control system: SIEMENS 828D (Touch) C axis: 0.001° Total power requirement: 20 kVA Machine weight: approx. 4.5 t Space requirements approx. L x W x H: 3.7 x 2.0 x 2.0 m Including automation preparation (loading robot interface) Year of manufacture: 11/2017, delivered 2018 - Automatic door Pedpfx Aewgi Hyofwogw - 12-position tool turret, driven, 5,000 rpm - Workpiece catcher - RENISHAW probe, fully automatic swiveling - Tailstock - Chip conveyor - Coolant pump Accessories: Including collet chuck Including 2 driven tool holders (radial + axial) Including 9 fixed tool holders Including USB & LAN interface Including manuals

Sąlyga: naudotas, Gamybos metai: 1970, Pressure: 63 t Throat depth: 250 mm Stroke: 8-100 mm Table depth: 710 mm Table width: 500 mm Pedpocxxx Hefx Afwegw Ram dimensions: 450x280 mm Ram adjustment: 63 mm Strokes per minute: 140 Total power requirement: 7 kW Machine weight approx.: 3.5 t

Gamybos metai: 1965, Sąlyga: naudotas, Pressure: 150 t Throat depth: 550 mm Stroke: 10 - 140 mm Table area: 1180 x 980 mm Strokes per minute: 40 spm Installation height: 500 mm Ram area: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Pgjdpfxocubato Afwew Machine weight: approx. 12 t Space requirement: approx. 3 x 1.7 x 3 m - with auxiliary brake - Ram weight compensation - Motorized ram adjustment - Centralized grease lubrication (manual) - Break-out plate - T-slot clamping plate - Safe for manual loading operations - Operating manual available

Gamybos metai: 1988, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 103.071.3156.78192, Saw blade diameter: 400 and 425 mm Cutting capacity at 90°, round: 130 mm Cutting capacity at 90°, square: 120 x 120 mm Pgjdoz N Amopfx Afwjw Mitre cutting capacity at 45°, round: 130 mm Mitre cutting capacity at 45°, square: 110 x 110 mm Cutting speeds: 11 and 22 m/min Feed speeds: 670 mm/min Cut-off length with automatic feed: up to 1200 mm Electrical connection: 380 V, approx. 4 kVA Saw drive: 1.6 / 2.5 kW Space requirement: 1800 x 3800 x 2000 mm Weight: approx. 1800 kg

Gamybos metai: 2002, Sąlyga: naudotas, Press pressure: 63 t Throat depth: 315 mm Stroke: 8–100 mm Strokes per minute: 140 spm Ram adjustment: 63 mm Table area: 1200 x 630 mm Ram area: 800 x 315 mm Through-hole in table: Ø 110 mm Table height: 820 mm Ram bore: Ø 50 mm Installation height: 335 mm Total power requirement: 7.5 kW Machine weight approx.: 5 t Pneumatic clutch-brake combination Centralized oil lubrication Hydraulic overload protection Podpfx Ajlp U D Tsfwsgw Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation Roller block rails in table Hydraulic tensioner on ram Counterbalance cylinder Approved for manual loading and unloading

Sąlyga: naudotas, Gamybos metai: 1970, mašinos/transporto priemonės numeris: 120895, Pressure: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 spm Table size: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Passage opening in table: 240 mm Passage opening in clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Psdpjfx Hv Hofx Afwsgw Space requirement approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press with tiltable design via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or underneath (360 x 160 mm), centralized lubrication via hand pump, additional clamping plate (700 x 480 x 850 mm), two-hand operation, foot release configurable, mode selector switch for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Gamybos metai: 1987, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 31700987, Technical Data Manufacturer: Stiefelmayer Model: SMM-C Year of manufacture: 1987 Measuring Range X: 2500 mm Y: 1000 mm Z: 1200 mm Other Details Measuring Counter: MZ200 (retrofitted in 2014) Column Cross-section: 100 x 100 Cross-arm Cross-section: 60 x 60 The machine can be upgraded with new accessories according to customer specifications. Price: on request! Installation and commissioning available! Podpfxjfd Dr Hj Afwogw We would be happy to provide you with a detailed quotation! Note: Our offer is directed exclusively to professional customers! (Subject to alterations and errors in the technical data, specifications and prices, as well as prior sale!)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1980, Pressing force: 300 t Psdpfxed A Hbcs Afwsgw Table size: 1,200 x 850 mm Throat depth: 400 mm Ram width: 1,100 mm Table opening: 400 x 250 mm Installation height: 500 mm Stroke rate: 32 strokes/min Stroke: 30 - 140 mm Ram adjustment: 105 mm Weight: approx. 19,500 kg Other features: - Approved for manual loading operations - Equipped with Herion safety valve Xsz 20 - Motor-driven central grease lubrication - Pneumatic ram weight balancing cylinder - Motorized ram adjustment - T-slots in the ram - Free-standing control panel - Connecting rod bearing overhauled