Ekscentrinis presas

Helmerding ERH 150 B

Būklė: naudotas, Gamybos metai: 1991, Spaudimo galia 1.500 kN Eigos reguliavimas 20 - 132 mm Stūmoklio reguliavimas maks. 90 mm Pgedsrm Nqmspfx Aqxel Eigos dažnis 50 / 75 1/min. Papildoma informacija ir nuotraukos pagal užklausą Naudota, presas buvo visiškai išardytas Neveikia, būtinas mechaninis ir elektrinis remontas Šiuo metu presas vėl surinktas mechaniškai

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Expanding Mandrel Decoiler Type: AE-050 Strip Width: 400 - 1,500 mm Strip Thickness: 0.5 - 3 mm Coil Weight: 20 t Coil Ø, outside: max. 1,800 mm Pjdpfx Ajupg Scsqxsgl Mandrel Ø: 508 mm Year of manufacture: 2009

Gamybos metai: 1987, būklė: naudotas, Pressure: 150 t Throat depth: 350 mm Stroke: 20–120 mm Strokes per minute: 50 / 75 spm Ram adjustment: 85 mm Podpfjp Apxhsx Aqxsgl Table size: 1150 x 670 mm Ram surface: 800 x 380 mm Passage opening in table: 330 x 200 mm Table height: 800 mm Pin hole in ram: Ø 50 mm Machine weight approx.: 8 t Space requirements (WxDxH): approx. 2000 x 2000 x 2700 mm Hydraulic clutch-brake combination Central oil lubrication Mechanical overload protection in ram Semi-automatic stroke adjustment Manual ram adjustment Two-hand operation Foot control Counter bearing

Būklė: naujas, Table width 3000 mm Table length 1500 mm Torch heads 1 Control CNC Feed rate 20,000 mm/min Total power requirement 15 kVA Space requirement approx. 4.5 x 2.5 m * Heavy machine bed with precision guides for smooth machine travel * Cross carriage with ball bearings, offering height adjustment with 400 mm vertical stroke * Thermal separation of drive and cutting area ensures maximum precision * Automatic height detection and torch height control during cutting * Torch holder with collision protection and automatic shut-off in case of collision * Installation or relocation of the machine possible via plug & play method using forklift, pallet truck, or crane * 3-sided access to cutting area thanks to cantilever design SATOTEC Extraction Table: The SATOTEC table system features a robust table construction for a maximum cutting thickness of 150 mm. For cutting workpieces up to 150 mm thick, oxy-fuel cutting technology is required. The workpiece support frame is equipped with replaceable 3 mm flat-bar slats, mounted at a 45° angle. The spacing between the slats is 50 mm. Power Source Kjellberg Q1500: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm, both dry and under water * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, can be increased with ProPierce Technology * Marking, grooving, and scribing of coated metallic materials * Inverter power source with digitally managed, fully electronic process cycle * Integrated cooling system with semi-automated filling and draining Pgedpfx Aopm U U Neqxsl Gas Control: Fully automatic, processor-controlled plasma universal gas console Q-Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Extraction System TEKA EcoCube 5.5 kW Filter medium: dry, fat-free or oil-free dust / fumes Filter area: 100 m² (4 cartridges @ 25 m² each) Filter cartridge: BIA M, Type Nano Separation efficiency: 99% (per BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan capacity: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz Current consumption: 11.5 A Voltage type: 3Ph+N+PE Fan installation: on the unit, incl. silencer duct bend, right side Motor control: frequency inverter Noise level: 75dB(A) + max 10 dB(A) during cleaning pulse Intake nozzle: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: light grey - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Closing hooks and toggle latches - Compressed air connection and condensate drain each fitted with cable gland - Compressed air connection with hose nozzle d=8mm - System equipped with grounding bolt - Cables in UL version - EATON frequency inverter installed on the left in attached control cabinet

Gamybos metai: 1965, būklė: naudotas, Pressure: 150 t Throat depth: 550 mm Stroke: 10 - 140 mm Table area: 1180 x 980 mm Strokes per minute: 40 spm Installation height: 500 mm Ram area: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirement: approx. 3 x 1.7 x 3 m Pgedpjcubatefx Aqxjl - with auxiliary brake - Ram weight compensation - Motorized ram adjustment - Centralized grease lubrication (manual) - Break-out plate - T-slot clamping plate - Safe for manual loading operations - Operating manual available

Būklė: geras (naudotas), Gamybos metai: 2002, Manufacturer: BRÜCK Model: 12/1600 Load capacity: 12,000 kg Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Pgedpshrnbkjfx Aqxsl Weight: approx. 14 t Without control cabinet.

Būklė: naudotas, Gamybos metai: 1970, mašinos/transporto priemonės numeris: 120895, Pressure: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 spm Table size: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Passage opening in table: 240 mm Passage opening in clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Pgsdpofx Hv Hsfx Aqxsl Machine weight approx.: 5.5 t Space requirement approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press with tiltable design via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or underneath (360 x 160 mm), centralized lubrication via hand pump, additional clamping plate (700 x 480 x 850 mm), two-hand operation, foot release configurable, mode selector switch for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Gamybos metai: 1971, būklė: geras (naudotas), Decoiler – Expanding Mandrel Decoiler with Coil Lifting Table Strip Width: 1,200 mm Pgedpfxsd Ha E So Aqxjl Strip Thickness: 0.3 – 5 mm Coil Weight: 10 t Mandrel Ø: 508 mm

Būklė: geras (naudotas), Gamybos metai: 1988, Kraštų lankstymo staklės, lenkimo presas, švytuoklinės lankstymo staklės, štampavimo lenkimo staklės -Pristatymas: esamoje, kaip apžiūrėta, būklėje, žr. nuotraukas -Funkcija: rankinis valdymas (be automatinio režimo) -Gamintojas: RAFAMET švytuoklinės lankstymo staklės, tipas KM-4 -Pavara: mechaninė Pgjdpfx Aqsv Tpxqjxel -Maks. darbo plotis: 2020 mm -Maks. lakšto storis: 4 mm -Atstumas iki atmušos: 750 mm -Galia: kW -Matmenys: 3350/1540/H1510 mm -Svoris: 3900 kg

Būklė: naudotas, Medžiagos plotis 300 mm Ritės svoris 3 t Medžiagos storis 2 - 4 mm Tiesinimo staklės, 7 volai, gam. Schleicher, tipas RM 6-95/160 Juostos plotis: 300 mm Juostos storis: 2 - 4 mm Tiesinimo skerspjūvis: 1200 mm² Įtampa: 220/380 V 50 Hz Galia: 3,1 kW Ritės laikiklis su prispaudimo voleliu, gam. Schleicher, tipas H-3 Maks. apkrova: 3 t Juostos plotis: 400 mm Pgsdpfx Aqjcdrmmsxsl Įtampa: 220/380 V 50 Hz Galia: 3,92 kW be valdymo