Konteinerio tekinimo įtaisas Tekinimo įtaisas

Heinrichsglück TR5.000PUR-F-H-S

Būklė: geras (naudotas), System: REWA chamber filter press, used Type: 470-15-25K-HP Design: side bar guided Filter plate size: 470x470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available to suit the medium Chamber volume: approx. 57 dm³ Filtration pressure: approx. 15 bar Material (product-contacting parts): flange, tie rods stainless steel, PP or rubber-coated Material (non-product-contacting parts): stainless steel Purchase or rental: Plant inspections by appointment at our facility. Other: We supply the system used, functional or refurbished, adapted to your requirements. Would you like to rent or buy this system? Please contact us, we are happy to assist you. Iisdjqakbrjpfx Aauea

Būklė: labai geros būklės (naudotas), We offer a 30,000 liter water tank. Iodpjk Dpznsfx Aausia Diameter: 2,500 mm | Length: 6,900 mm plus 100 mm insulation Best regards, Tank-Umweltschutz Wozniack

Gamybos metai: 2022, būklė: naujas, Load capacity: 10,000 kg Speed: 0.03–1.6 rpm Iiodsfxgp Ujpfx Aauea Faceplate diameter: 1,500 mm, extendable to 2,500 mm Welding current transmission: 800 A

Būklė: naujas, DESCRIPTION DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products by means of a contact roller (approx. 55° Shore) with an abrasive belt, removing heavy burrs in the initial step. Iodpfx Aajd Ixadouoia The second station processes the products with two counter-rotating cross belts from both below and above. The cross belts round the edges of the workpieces on both inner and outer sides. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data - DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction port per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Būklė: naudotas, • Load capacity 350 kg • 6 adjustable suction cups, 250 mm diameter • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, new and unused • Immediately available IV: + Construction Standards 1. The design of the unit strictly complies with the European CE Standard EN13155: 2016, the American ASME (Mechanical Engineering Association) B30-20-2006 standard, and the German UVV18 standard, with key design parameters exceeding those of the aforementioned standards. Iijdexnvq Ejpfx Aauea 2. Safety Factor: The main structure is rated at 4.0, vacuum safety level is 65%, and the standard is 85%, which is 20% above the required safety standard. V+ Device Testing and Standards 1. General • Verifying all materials are complete • Checking if the equipment surface is painted or scratched • Confirming no damage to suction cups or tubing 2. Factory-Checked Items © Equipment suction test © Equipment pressure retention test © Alarm system test © Various control components • Price on request

Būklė: naudotas, Gamybos metai: 2014, CNC Machining Center Biesse Skill 12 24 G FT Iisdpfxswnhane Aausa Year of manufacture: 2014 Machine no.: 60961 Tool holder: HSK F63 10 vertical drilling spindles 12 tool changer slots Software: BiesseWorks X-axis: 2465 mm Y-axis: 1260 mm Z-axis: 324 mm Disassembled for transport on a standard trailer; Dimensions: 4500x2200x2400mm; Net weight: 2000kg - Special features: - Description: The pallet with the white control cabinet does not belong to this machine - Year of manufacture: 2014 - Documentation available: Yes - CE certificate available: No - Serial number: 60961 - Number of milling spindles: 1 - Type of milling table: Flat table - Tool clamping system: HSK-F63 - Drilling tools available: Yes - Vertical drilling spindles: 10 - Tool changer positions: 12 - System/software: BiesseWorks - Safety feature: Safety fence - Vacuum pump included: Yes - Number: 1 - Brand: Becker - Working area X [mm]: 2465 - Working area Y [mm]: 1260 - Working area Z-axis [mm]: 324 Financial Information: VAT: The stated price is net plus VAT VAT/differential taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Glenn Smeets

Būklė: naudotas, Gamybos metai: 2009, Cutting diameter: 15 - 560 mm Cutting range at 90 degrees, flat: 560 x 630 mm Saw blade dimensions: 7,400 x 54 x 1.60 mm Control system: KASTO Material feed - single stroke: 900 mm Multiple-feed length, max.: 9,999 mm Minimum cut length: 6.00 mm Saw motor: 5.50 kW Cutting speed: 13 - 127 m/min Material support height: 700 mm Iiodpfx Ajvxwkfoauea Total power requirement: 12.00 kW Machine weight: approx. 6.00 t Space requirement: approx. 3.70 x 2.50 x H2.50 m Double-column automatic bandsaw with KASTO Compact Control; frequency-controlled saw drive; minimum quantity lubrication; chip conveyor; 6m powered feed conveyor + 3x short roller conveyor 1m; 2m discharge conveyor; machine can be inspected under power.

Gamybos metai: 2023, būklė: naujas, Tank & Environmental Protection Wozniack - Specialist Company in accordance with the Water Resources Act Dear Sir or Madam, We are offering a 10,000-liter double-walled storage tank for the storage of heating oil, compliant with EN 12285-2 standard. Nominal capacity: 10 cbm, new, EN 12285-2 standard Paint finish: RAL 7035 Material: Steel-in-steel, material grade S235JRG2 Documentation: Manufacturer’s certificate / type plate Iijdpfx Aaok Dpv Aeusa Includes: 1 piece dipstick 1 piece vent connection 1 piece fill connection 1 new overfill prevention device 1 new leak monitoring device 1 piece ladder 1 piece suction line Tank dimensions: approx. 5,300 mm Diameter: approx. 1,600 mm Weight: approx. 2,000 kg Above-ground installation Delivery time: September Best regards from Warstein Tank and Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Būklė: naujas, Gamybos metai: 2026, Drilling and Milling Automation Unit Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling automation unit with mobile machining head – the table remains stationary, the drilling head moves. The system can be operated both manually and fully automatically. After each drilling operation, the machining head automatically moves in the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine controller can be carried out using DXF/DWG file formats via a programming station. Alternatively, programming can also be done directly at the machine controller. The system is highly robust and assembled from proven machine components. Technical Specifications: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base • Spindle speed: up to 2,500 rpm (standard version), delivered with the appropriate speed for your application • Tool holder: SK 40 • Drive for X, Y, and Z axes via servo motors • Rapid traverse in X-axis: 20 m/min • Rapid traverse in Y-axis: 5 m/min • Distance table top to bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St-50 (depending on tool) • Thread tapping: M4 - M30 (with floating chuck) • Y-axis travel: 300 mm • Tolerance in X-axis: ±0.1 mm • Tolerance in Y-axis: 0.06 mm • Tolerance in Z-axis: 0.06 mm • Spindle drive motor: 5.5 kW • Machine weight: 2,300 kg • Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Front safety with light barrier • Rear access protection with safety fence • Control: 21.5" touch-screen panel, reinforced front glass • Simple on-machine programming • Milling of elongated holes and circles • Lubrication via minimum quantity spray system • Without material clamping devices Iisdpfsfu Ivzex Aauea • Remote maintenance via TeamViewer possible (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Workflow simulation • Digital handwheel Your Benefits: • Workpiece surfaces remain protected • Clear, graphical user interface • Machining at the end of the workpiece is easy • 50% space saving compared to moving-table operations • Chips are collected in chip tray • Easiest programming and operation • Minimum quantity spray system (standard) • Programming errors eliminated via CAD/CAM You are welcome to visit our manufacturing/demo hall to inspect the desired system at any time. Please feel free to contact us for an appointment. We look forward to hearing from you! Plantec Maschinen GmbH

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Winch incl. Lifting capacity max. 2 t at 2.7 meters Iiedpfxeq N E U Ao Aauoa Lifting capacity max. 1 t at 5.3 meters Operating hours: 270 h Electric: yes