Matavimo sistema

Heidenhain LS 803, LS 903, LS 403, LS 486, LC 483

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, X ašies eiga: 600 mm, Y ašies eiga: 450 mm, Z ašies eigos atstumas: 400 mm, greitas poslinkis X ašimi: 35 000 m/min, greitas poslinkis Y ašis: 35 000 m/min, greitasis eiga Z ašyje: 35 000 m/min, ruošinio svoris (maks.): 200 kg, bendras ilgis: 500 mm, bendras plotis: 400 mm, stalo apkrova: 200 kg, sukamosios stalo skersmuo: 280 mm, Coolant system Filtration tank HR 410 handwheel iTNC530 controller 1st owner machine X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 400 mm A-axis travel: 110° B-axis travel: 360° Table length: 500 mm Table width: 400 mm Table load capacity: 200 kg Table diameter Ø: 280 mm Feed rate X-axis: 35,000 mm/min Feed rate Y-axis: 35,000 mm/min Feed rate Z-axis: 35,000 mm/min Feed rate A-axis: 10°/min Feed rate B-axis: 15°/min Tool holder: 40 ISO/BT/MK Spindle power: 15 kW Spindle speed: 18,000 rpm Tool changer: 30 positions Through spindle coolant (IKZ): 20 bar Number of controlled axes: 5 Chip conveyor: Yes Coolant unit: Yes Length: 3,500 mm Ljdpfx Afsx R S Sme Iehb Width: 3,500 mm Height: 2,800 mm Weight: 6,600 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend that you verify all critical details.

Sąlyga: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 64532, used manual hydraulic pipe bending device Available bending formers: 3/8", 3/4", 1 1/4" and 2" Lhodjdzw Hwopfx Af Iob Space requirement: 850 x 640 x 780 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, x-axis travel: 800 mm y-axis travel: 600 mm z-axis travel: 500 mm O F F E R We are pleased to offer you, subject to prior sale and errors excepted, the following from stock, non-binding: HERMLE 5-Axis Universal Machining Center in gantry design with swivel rotary table Model: C 800 U Year of manufacture: 1998 12648 _____ Milling head travel longitudinal X-axis: 800 mm Milling head travel transverse Y-axis: 600 mm Milling head vertical Z-axis: 500 mm NC tilting axis A-axis: -20 / +90 ° NC rotary table C-axis: 360,000 ° Overhang of the vertical spindle max. approx.: 600 mm Installation height under spindle max. approx.: 100 / 600 mm Table size (swing diameter Ø 630 mm): 540 x 540 mm Max. workpiece weight on table approx.: 300 kg Spindle interface: SK 40 Spindle speeds vertical, infinitely variable: 18,000 rpm Feed rates/rapid traverses infinitely variable: 2 – 35,000 mm/min Feed force approx.: 11/16 Nm Spindle drive: 15 kW Total power approx.: 37 kW – 400 V – 50 Hz Weight approx.: 8,000 kg Accessories / Special Features: • Compact, modified gantry design with 3 axes in the milling head for feed rates up to 35 m/min. All drives and guides are outside the working area. • Machine base made of mineral cast with high damping properties, foundation-free installation, high static and dynamic stability. • SIEMENS 5-axis path control type 840 D with graphics and all modern programming options for full 5-axis machining of complex workpieces with electronic handwheel • NC swivel rotary table (C-axis 360,000° / B-axis -20/+90°) Ø 630 mm • Robust vertical head with HERMLE milling spindle up to 18,000 rpm with automatic swivel nozzle block • Tool changer with extended (additional) magazine for up to 87 tools • Coolant system with chip conveyor, oil mist extraction with filter, full enclosure • Extensive accessories including approx. 50 tool holders, operating manuals. Condition: very good – machine under power and ready for demonstration A video of the machine will be available here shortly (please click on the link): C 800 U/4 Lhedpfx Afjx Dndcs Ieb Delivery: ex stock – immediately available, FCA Metzingen Payment: strictly net – due immediately upon receipt of invoice, prior to delivery of the machine

Sąlyga: geras (naudotas), Gamybos metai: 2000, mašinos/transporto priemonės numeris: 13639, Heidenhain Steuerung Verfahrwege: X-Achse: 1.200 mm Y-Achse: 800 mm Z-Achse: 500 mm Hauptspindel: Drehzahl: 16.000 U/min Antriebsleistung – Hauptspindel: 17 kW Werkzeugaufnahme Spindel: HSK63 Spindeldurchmesser vorn im Lager: 70 mm Erweiterter Werkzeugwechsler: 100 Plätze Rundschwenktisch: Tischdurchmesser: 800 mm Lhsdpfx Aeinh Rqef Isb Schwenkbereich A-Achse: -15° / +97° Drehbar C-Achse: 360° max. Tischbelastung ca. 1.000 kg max. Werkzeugdurchmesser: 80 mm max. Werkzeugdurchmesser bei freiem Nebenfach: 125 mm max. Werkzeuglänge: 300 mm max. Werkzeuggewicht: 8 kg Vorschübe: Eilgang (X / Y / Z): 30 m/min Gesamtanschlusswert: 31 kVA Maschinengewicht: 15 t Platzbedarf ca.: 6,0 x 5,0 x 3,6 m Sonstige Ausstattung: - Dokumentation - Späneförderer - Elektronische Wärmekompensation Y- und Z-Achse

Sąlyga: naudotas, Mitre Cold Circular Sawing Machine Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of Manufacture 1983 Saw Blade Diameter: 400 mm Cutting Capacity at 90° Round: Ø 130 mm Cutting Capacity at 90° Square: 120 x 120 mm Cutting Capacity at 90° Rectangle: 305 x 20 mm Cutting Capacity at 45° Round: Ø 130 mm Cutting Capacity at 45° Square: 110 x 110 mm Cutting Capacity at 45° Rectangle: 245 x 30 mm Clamping Range, Vice Feed: 30 to 140 mm Working Height: 1000 mm Mitre Cutting: 0 - 180° Feed Travel: 600 mm Saw Blade Speed: 10 + 20 m/min, 2 stages Motor Power: 1.7 and 2.6 kW Hydraulic Motor: 1.5 kW Electrical Connection: 380 Volt, 50 Hz - Hydraulic material vice feed with 1500 mm infeed roller conveyor on the left - Dual-stage feed travel up to 1200 mm (feed twice, then saw) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut – saw angle adjusted manually - Hydraulic feed control, cutting speed adjustable manually Lodpfx Ajd N H A Nef Ijhb - 2 motor speeds for saw blade speed - Infinitely adjustable saw blade stroke - Coolant system with electric pump integrated in machine base - Hydraulic unit fixed on the base machine - Piece counter with zero reset Space requirement of saw: 2600 x 1200 x 1900 mm Weight of saw: approx. 1400 kg In good condition

Sąlyga: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Weiler C30 x 750 Precision Lathe (2007) Manufacturer: Weiler Model: C30 x 750 Year of manufacture: 2007 Availability: multiple machines available Condition: very good, used, from training workshop, last maintenance 09/2024 Lhedpfjxd Tiwjx Af Iob Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 160 mm Cross slide travel: 180 mm Bed width: 240 mm Tool cross-section: 20 x 20 mm Spindle nose to DIN 55027 size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 40.5 mm Main spindle internal taper: 5 mm Drive power (60%/100% duty cycle): 9/7 kW Total speed range: 1 - 4,500 rpm Longitudinal feed force: 6,000 N Face feed force: 3,000 N Feed range: 0.001 - 10 mm/rev Rapid traverse speed longitudinal/face: 6/3 m/min Metric threads: 0.1 - 400 mm Inch threads: 56 - 1/4 tpi Module threads: 0.125 - 28 mm DP threads: 224 - 1 DP Max. number of thread leads: 99 Tailstock quill diameter: 50 mm Tailstock quill stroke: 130 mm Tailstock quill taper: MK3 Length: 1,750 mm Width: 1,350 mm Height: 1,670 mm Weight: 1,300 kg Scope of delivery: Rota S Plus 200-52 3-jaw chuck Multifix tool post Machine lamp Coolant system Machine feet Original documentation Weiler maintenance log 09/2024

Sąlyga: geras (naudotas), 16 external turning tool holders 41 internal turning tool holders Ledpfxjikn E Hs Af Ishb

Sąlyga: naujas, mašinos/transporto priemonės numeris: 1, tuščias svoris: 7 500 kg, didžiausias leistinas svoris: 22 500 kg, bendras svoris: 30 000 kg, ašių konfigūracija: 2 ašys, krovimo vietos ilgis: 10 070 mm, krovinių skyriaus plotis: 252 mm, krovos erdvės aukštis: 85 mm, pakaba: oras, padangos dydis: 245.70 r 17,5, spalva: geltonas, Gamybos metai: 2022, Įranga: ABS, galinis keltuvas,

Sąlyga: naudotas, Gamybos metai: 1997, - Edge banding unit - Cross-cut unit Lsdpfx Afjd Inktj Iohb - Milling unit - Fine milling unit - Scraper - Buffing unit

Sąlyga: naudotas, Gamybos metai: 2008, x-axis travel: 12,000 mm y-axis travel: 1,500 mm z-axis travel: 3,500 mm Feed rate: 20,000 mm/min Spindle mount: DIN 69871 A50 / HSK63 Speed range: 35–6,000 rpm Table load capacity: 30,000 kg Operating hours: 26,658 h Control: Siemens 840 Digital Milling head: Automatic milling head, 45°, Internal coolant supply: 60 bar Coolant system: JUMA+GAIN, 200 L capacity Chip conveyor: included Tool changer: 80 positions Total power requirement: 209 kW Machine weight: approx. 75 t - Automatic 45° head, 6,000 rpm, with 0.001°/0.001° positioning (DIN69871 A50) - Rotary head (5 axes), 18,000 rpm, 23 kW, DIN69893 HSK A63 - Direct output head, 6,000 rpm, DIN 69871 A50 - Extension head 500 mm, 2,000 rpm, DIN 69871 A50 - Tool holding heads for turning with Capto 6 clamping systems - Automatic head changer (AHC) - AITEK ACH head changing station for automatic exchange of 4 heads - Rotary table with linear drive mod. ZA/B-2000 Table longitudinal traverse (B): 2,000 mm Table rotation (B): 0.001° Table surface: 2,500 x 2,500 mm Max. speed: 10,000 mm/min Hydrostatic system: included Table load capacity (max.): 30,000 kg - Rotary-milling table BOST Ø 2,500 mm Chuck size: Ø 2,500 mm Chuck longitudinal travel: 1,500 mm Ljdpfoxvdunox Af Iehb Table load capacity (max.): 25 t Spindle drive power: 2 x 37 kW Rotational speed (max.): 200 rpm Milling power (max.): 55 kW Rotary-milling axis: included Linear travel speed: 15,000 mm/min - BLUM LASER MICRO A5 - Probe M&H PS 20 with DIN 69871 A50 - Probe M&H PS 20.00 with DIN 69893 HSK A63