Dymatrix 106 CSB

Heidelberg Dymatrix

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, perforavimo jėga: 330 t, Machine for Die-Cutting, Embossing, Waste Stripping, and Blank Separation - as is - System equipped with a high-performance sheet feeder for fully automatic NON-STOP operation ⦁ for fully automatic die-cutting, creasing, and embossing with or without gripper edge ⦁ for punching out inner waste as well as lateral and rear sheet edges ⦁ for stacking the die-cut and stripped sheets in pile form with the attached gripper edges or ⦁ for separating the gripper edges and then stacking the remaining sheets in piles ⦁ with a patented gripper car registration system for maximum register accuracy ⦁ with a batch stacker enabling fully automatic separator sheet feeding and NON-STOP delivery, which does not require retooling even for the smallest cut sizes (changeover table with comb structure) ⦁ separator sheet magazine with electronic level monitoring, refillable during production ⦁ with Centerline equipment ⦁ with automatic pallet changing device at delivery Hsdpfx Ajww E Nrjb Aoh Specification: Max. sheet size: 760 x 1060 mm Min. sheet size: 350 x 400 mm Maximum die-cutting force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 gsm Cardboard up to 2000 gsm Corrugated board up to 3 mm (max. sheet curl 4%) Equipment: Optical sheet register (Dyset) automatic non-stop feeder stripping station blank separation station Centerline fully automatic pallet changer at delivery incl. operator platform quick-lock frames in all tooling stations

Sąlyga: naudotas, Gamybos metai: 1988, Bobst Flexo 1604 Printing Machine, bottom printing, 4 colours, equipped with anilox cylinders 120 l/cm and 80 l/cm. Bobst Transfer BOBST SPO 1600 Flatbed Die Cutter, max format 1100 mm x 1600 mm / 43.3" x 63", with 4 bottom-side printing units plus MPA, sheet transport with traditional rollers. - Anilox cylinders with 120 and 80 lines - Open steel doctor blade chamber - Vacuum feeder - Die cutting section - Waste stripping section - Centerline II - High pile delivery with two lifting platforms - Max sheet size: 1100 mm x 1600 mm / 43.3" x 63" - Min sheet size: 520 mm x 600 mm / 20.5" x 23.6" Hodpfx Abev Ifpus Ash - Cutting force: 400 t - Materials: E, B, C flute, CB, BE - Max speed: 6,000 sheets/hour Possibility to sell machines separately.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, bendras svoris: 52 000 kg, perforavimo jėga: 600 t, reikalingas aukštis: 3 520 mm, vietos reikalavimas ilgis: 12 150 mm, reikalingas plotis: 9 340 mm, Machine for die-cutting, embossing, waste stripping, and blank separation Hsdpfxst E Ntho Ab Aeh Used machine, overhauled at QTM Schwalmtal plant System equipped with high-performance sheet feeder for NON-STOP operation ⦁ For fully automatic die-cutting, creasing, and embossing, with or without gripper edge ⦁ For stripping internal waste as well as side and rear sheet edges ⦁ For stacking the die-cut and stripped sheets in piles, with attached gripper edges, or ⦁ For separating the gripper edges and subsequently stacking the remaining sheets in piles ⦁ With a patented gripper bar register system for maximum registration accuracy ⦁ With a pile stacker that enables fully automatic separator sheet feeding and NON-STOP stacking, and does not require retooling even for the smallest cuts (change-over table with comb structure) ⦁ Separator sheet magazine with electric fill level control, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet changeover device in delivery ⦁ Modem ⦁ Standard machine height extension 600 mm Specification Maximum sheet format: 1060 x 1450 mm Minimum sheet format: 500 x 700 mm Maximum die-cutting force: 6.0 MN (600t) Speed: 8,000 sheets/hr Processable materials: Paper min. 80 g/m² Board up to 2000 g/m² Corrugated board up to 5 mm (max. sheet warp 4%) Equipment: Patented QTM rail system Manual non-stop feeder Stripping station Blank separation station Centerline Fully automatic pallet change device in delivery Including platform Control upgraded to Siemens S7 Fully overhauled machine drive Quick-action frames in all tool stations

Sąlyga: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, Heidelberg Dymatrix 113 CSB Pro – COMPLETELY OVERHAULED Machine type: Embossing and Die-cutting System / Automatic Sheet Die-cutter Machine number: 400018 Year of manufacture: 2004 Technical Data Max. strokes per hour: 9,000 sheets/h Length without feeder: approx. 5,190 mm Length with feeder: approx. 7,770 mm Max. width: approx. 2,400 mm Max. height: approx. 3,200 mm Max. height with open window: approx. 3,930 mm Weight without feeder: approx. 30,400 kg Feeder W4 weight: approx. 3,000 kg Internal chase dimensions: 820 x 1,134 mm Max. die-cutting forme size: 816 x 1,130 mm Max. die-cutting area: 800 x 1,120 mm with gripper margin Adjustable gripper margin from: Standard 11–17 mm with 13 mm wood before first knife, Option 8–14 mm with 10 mm wood before first knife Cutting rule height: 23.8 mm Feeder stack height including pallet: max. 2,000 mm Delivery stack height including pallet: max. 1,700 mm Max. feeder stack weight: 1,000 kg Max. delivery stack weight: 1,000 kg Hedpfxov T T N Ho Ab Aeh Feeder residual stack height: max. 450 mm Feeder residual stack weight: max. 450 kg Delivery auxiliary stack height: max. 200 mm Delivery auxiliary stack weight: 200 kg Pallet Sizes Feeder: max. 800 x 1,200 mm (EURO pallet) Delivery: max. 800 x 1,200 mm (EURO pallet) Pallet height: max. 170 mm Drive and Power Supply The machine is driven by a frequency-controlled motor via a flywheel. Between the flywheel and the machine is a pneumatic clutch with spring-loaded brake, used to engage and disengage the machine. The motor runs continuously. The control cabinet located with the machine contains, with few exceptions, all switching devices for the die-cutter and feeder. Command and signal devices are located at the machine, distributed as required across the control panels. Control Cabinet Features: Main supply, main switch, fuses, motor protection device, PLC control Connection values: 3-phase 400 V, 50 Hz, 63 A Control voltage: 24 V DC; 230 V; 50 Hz Dimensions: 2,800 x 600 x 2,200 mm The machine is in excellent condition. A test run can be arranged at any time. Various accessories included. Patented chain guide rails from QTM have already been retrofitted. Price: On request

Sąlyga: geras (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, Bobst SP 142 ER Year 1987 Max. size: 1020x1420 mm Min. size: 700x520 mm Max. speed: 6000 sheets/h Max. cutting force: 600 t Centerline system Hjdpovhcgqofx Ab Aoh Micrometric adjustment Currently in production

Gamybos metai: 2007, Sąlyga: geras (naudotas), • Modell: BOBST Autoplatine® SPanthera 106 LER • Maschinentyp: Automatische Flachbett-Stanzmaschine mit Ausbrech- und Nutzentrennung • Hersteller: BOBST • Kategorie: Hochleistungsstanze für Faltschachteln & Verpackungen • Baujahr: 2007 • Produktionsstatus: Maschine unter Strom _____ Format- & Substratfähigkeiten • Max. Bogenformat: 760 × 1.060 mm • Min. Bogenformat: ca. 350 × 400 mm • Max. Stanzformat: 745 × 1.055 mm • Greiferrand: ca. 8–10 mm • Kartonstärke: 0,1 – 2.000 g/m² (von Papier bis Schwerkarton) • Wellpappe: bis N-Welle / F-Welle (abhängig vom Werkzeug) • Max. Stanzdruck: bis 260 t (BOBST Autoplatine-Standard) _____ Produktion & Leistung Hjdpfxexzr Hpo Ab Ash • Maximale mechanische Geschwindigkeit: bis zu 9.000 Bogen/Stunde • Automatisches Registersystem: Integriert • Nutzentrennung: Ja (LER = Logistik, Entnahme, Restbogenentfernung = vollständige Nutzentrenn-Einheit) • Ausbrechstation: Vollautomatisches 3-Rahmen-Ausbrechsystem • Non-Stop-Funktionalität: o Non-Stop-Anleger (kontinuierliche Stapellogistik) o Non-Stop-Auslage (automatischer Stapelwechsler)

Sąlyga: geras (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, BRAUSSE 1450 SE Jahr: 2008 Maximale Größe: 1055 x 1450 mm Maximale Stanzkraft: 400 t Maximale Geschwindigkeit: 5.500 Bogen/Stunde Quicklock-System Centerline in Produktion Hsdpfxet D Ncas Ab Ash

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras plotis: 6 400 mm, bendras ilgis: 7 800 mm, bendras aukštis: 2 500 mm, bendras svoris: 30 000 kg, New machine Machine for die-cutting, embossing, waste stripping, and blank separating Specification: Max. sheet size: 830 x 1,150 mm Min. sheet size: 450 x 550 mm Maximum die-cutting force: 3.0 MN (300 t) Speed: 7,000 sheets/h Processable materials:  Paper: min. 80 g/m²  Cardboard: up to 2,000 g/m²  Corrugated board: up to 4 mm Equipment: Manual non-stop feeder Automatic pile alignment at feeder 10" display at feeder Automatic non-stop delivery roll apron Stripping station Blank separating station Centerline system Automatic separator sheet inserter for stabilizing blank stacks Quick-lock chases for upper stripping tool and central stripping board Quick-lock chases for upper and lower blank separating tools Pneumatic locking frames and die plate clamping APC 1 – automatic cutting pressure system APC 2 – platen tilting at exit 1x 4 mm die plate incl. 10x 1 mm cutting plates 2x 5 mm die plates 1x Quicklock locking frame Hedpfx Abjt H Nhhj Ajh 2x locking frames without Quicklock QTM fine adjustment for cutting plates Sheet monitoring at each station with 2 sensors Incl. platform 1 set of tools (Bobst system) Delivery time: 6–8 months

Sąlyga: geras (naudotas), Gamybos metai: 2014, Nur ca. 150 Millionen Drucke Ausstattung CX Paket Logistik – mit manuellem Non-Stop Anleger FAPC (Vollautomatischer Plattenwechsel) Preset Ergotronic Bedienpult WallScreen Anzeige Colortronic Farbdosierung Hjdpfxjx Sdn Aj Ab Ajh Varidamp Seitliche, Umfangs- und Diagonalregisterregelung Technotrans Beta c 220L (luftgekühlt) Farbtemperaturregelung CleanTronic Synchro – Walzen-/Gummituch-/Druckzylinder-Wascheinrichtung DriveTronic Anleger SIS (Sensoric Infeed System) Non-Stop Anleger – manuell, nicht vollautomatisch Non-Stop Auslage - Rolloband Erhöht auf Sockel (420 mm) Farbmischer (UV) EES CleanTronic Simultaneous Blanket & Impression Cylinder Wash CleanTronic UV – separater Platz für UV-Wäsche im Schrank UV-Zwischentrockner – 6x UV-Kassetten, beliebig positionierbar UV-Zwischentrockner – mögliche Positionen an allen 6 Druckwerken, an den Trockentürmen und an 3 Positionen in der Auslage Lackierwerk 1: Harris & Bruno Dispersions- und UV-Lackpumpen mit Vorlagetanks (beheizt) Trockenturm 1: VariDry IR/Heißlufttrockner (plus Zwischentrocknerposition) Trockenturm 2: VariDry IR/Heißlufttrockner (plus Zwischentrocknerposition) Lackierturm 2: Harris & Bruno Dispersions- und UV-Lackpumpen mit Vorlagetanks (beheizt) Drivetronic SFC Simultaneous Form Change (an den Lackierwerken) KBA VariDry IR/Heißluft/UV – Am Ende der Maschine ALV3 verlängerter Ausleger

Sąlyga: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 23 000 h, Bobst SP 142 CER II Hsdpfx Absxxypyo Ajh