Tempimo bandymo mašina - universali bandymo mašina

Hegewald & Peschke H50TMCI

Būklė: naudotas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 1 500 mm, veleno greitis (maks.): 6 000 aps./min, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! TECHNICAL MAIN DATA Year of manufacture: 2020 Travel/capacities: Longitudinal (X): 3,000 mm Vertical (Y): 1,500 mm Transverse (Z): 1,500 mm Clamping surface NC rotary table: Indexing table: 2,400 x 1,900 mm Max. workpiece weight (with centered load): 10,000 kg Positioning accuracy: arc/sec ± 2.5" Maximum swing diameter: approx. 2,900 mm Paint finish: RAL 7024 graphite grey RAL 7038 agate grey Tool interface: DIN 69871 AD (ISO50) Big Plus Pull stud: DIN 69872 Form A Main spindle drive: Motor / Manufacturer: Heidenhain main spindle drive Max. drive power: 32 kW from 376 rpm Max. torque: 1,085 Nm (constant up to 376 rpm) Speed control / gearbox: 3-speed (oil-cooled) with automatic shifting Spindle speeds 6,000 rpm: low range 0-738 rpm, medium range 739-1,842 rpm, high range 1,843-6,000 rpm Axis drives/feeds: Axis drive motors: Manufacturer Heidenhain (digital drives) Rapid traverse max.: X, Y, Z axis 25,000 mm/min Max. working feed: X, Y, Z axis 15,000 mm/min Max. average acceleration: 2 m/s² Max. feed force: X, Y, Z axis 26,000 N Fsdpfxoygiwqj Ahwopd Axis drive systems: X axis (longitudinal): preloaded ball screw Ø 63 x 40 Z axis (vertical): preloaded ball screw Ø 63 x 20 Y axis (transverse): preloaded ball screw Ø 50 x 20 Guideway system: X axis (longitudinal): 6 pcs, type INA RUE 55 EL Z axis (vertical): 4 pcs, type INA RUE 65 EL Y axis (transverse): 8 pcs, type INA RUE 55 E-HL, plus additional damping unit Clamping table/Table surface: T-slot size, 10x: 22 H 12 mm Central reference slot, 1x: 22 H 8 mm T-slot pitch: 150 mm (outer groove pitch 1800 mm) Weight: Weight RT3000: approx. 32,000 kg Connected load: approx. 53 KVA Heidenhain TNC 640HSCI Automatic tool changer with 80 positions Automatic oil-cooled milling head 2.5° x 1° 2 chip conveyors Coolant system with increased delivery up to 37 bar through spindle (IKZ) Special operating mode 4 RepairFIT is our proven solution for cost-effective access to our product range. Machines available in this line are sourced by us through a stringent selection process and subjected to thorough inspection (deep-dive check). Following intensive cleaning, any obvious faults or defects identified are professionally repaired by our qualified service team.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1991, X ašies eiga: 1 500 mm, Y ašies eiga: 700 mm, Z ašies eigos atstumas: 550 mm, veleno greitis (maks.): 2 066 aps./min, bendras svoris: 4 000 kg, Heidenhain 3-axis DRO feed drives automatic lubrication external electrical cabinet table 2000x460mm travels 1500x700x550mm Fedpfxewqcv Nj Ahwopd weight 4000kg

Gamybos metai: 2024, būklė: naujas, mašinos/transporto priemonės numeris: H3000-H5000TM,

Gamybos metai: 1999, būklė: naudotas, Used Entex extruder PL-WE150, complete with control cabinet, previously used for powder coatings, in good condition. Fsdobqt Arepfx Ahwepd We can also offer you an Entex PL WE 70!

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Ultrasonic Cleaning System ULTRA200 Usable platform dimensions: 850 x 450 mm Max. usable height: 400 mm Max. loading weight: 100 kg Volume: 380 liters + 55 liters (oil separator) Heating: 2 x 4 kW Manufactured entirely from stainless steel Heat and sound insulated External dimensions approx.: L 1,500 x W 950 x H 1,750 mm Control unit: Manufacturer Fatek, HMI from Weintek Electrical connected load: 10.55 kW Includes: - Automatic pneumatic goods lift - Surface rinsing/oil separator for bath maintenance - Ultrasonic submersible transducers with dual side sonication - Power: 2,000 W effective / 4,000 W peak – Multi-frequency: 20 kHz / 40 kHz - Manual blow-off gun Demonstration unit from the Glogar Technology Center, available immediately Fedov U A Izopfx Ahwopd

Būklė: geras (naudotas), Gamybos metai: 2011, mašinos/transporto priemonės numeris: MS 1153, Technical data (approx.): - Passage to blasting chamber: W 370 x H 170 mm - Blasting nozzle - Door opening to blasting chamber - Blast media pressure vessel - Blast media recovery - Separate control panel - Space requirement blasting unit: 1600 x 2000 x H 1750 mm - Space requirement blast media container: 1200 x 1200 x H 2250 mm - Cartridge filter with suction fan MUNK - SCHMITZ - Air volume: 700 - 1500 m³/h - Suction fan: 3 kW - Space requirement filter unit: 1600 x 1600 x H 3250 mm - Motor-driven infeed roller conveyor: 4 m - Non-driven roller conveyor: 3 m - Roller width approx.: 800 mm - Roller conveyor height approx.: 700 mm Fpedpellvr Defx Ahwod

Būklė: paruoštas naudoti (naudotas), bendras aukštis: 3 900 mm, bendras plotis: 2 900 mm, bendras ilgis: 8 000 mm, valdiklių gamintojas: Heidenhain, tuščias svoris: 13 000 kg, Type: TMML6-centrum Maximale afstand van kolom tot midden van de spindel: 1210 mm (kiel-diepte) Fpjdpfx Ajv St Efshwed Gereedschapswisselaar met 30 posities Spaantransporteur Kan achteraf worden uitgerust met een nieuwe Heidenhain-besturing Originele tafel kan opnieuw worden gebruikt, of een T-groef vloerplaat kan worden geplaatst voor het bewerken van grotere werkstukken Langsverplaatsing X-as: 3023 mm Dwarsverplaatsing Y-as: 800 mm Verticale verplaatsing Z-as (hoogte): 1528 mm Afmetingen klembereik - tafel: 4200 x 1000 mm Maximale werkstukhoogte: 2000 mm Vermogen op spindel: 20 kW Opname in de freeskopspil (ISO): ISO 50 Toerentalbereik: 50 tot 1980 tpm

Gamybos metai: 2007, būklė: visiškai atnaujintas (naudotas), GF AgieCharmilles Progress V3 Year of manufacture: 2007 Travel paths: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (dry) Achievable surface finish: Ra 0.20 µm Maximum cutting speed: 500 mm²/min Fedpfjmmfwujx Ahwjpd Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading in case of wire breakage Manual front door (accessible from one side) Including AGIEJOGGER handheld control for convenient setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3,460 kg The machine will be cleaned and completely overhauled after receiving your order. You will receive a 6-month warranty on all machine parts. Commissioning and training are also available upon request.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, veikimo valandos: 2 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1630, bendras svoris: 7 800 kg, garantijos trukmė: 6 mėnesiai, galia: 85 kW (115,57 AG), A complete production line based on the Di Più BRIK MB100 briquetting press is for sale (complete production line). Di Più BRIK MB100 machine, fully overhauled (factory rebuilt in 2025), ready for immediate operation. The machine is designed for high-performance briquetting, suitable for demanding industrial applications. Fsdpfxewrp Eme Ahwepd The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory, with all vital parts, cables, wiring, and necessary electrical components replaced. As a result, the machine is in as-new condition and comes with a 6-month Di Più manufacturer's warranty. The machine can produce briquettes with or without a hole, with diameters from 90 mm to 110 mm, from both soft and hard wood, in round or square shapes. The machine can be inspected at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compressing wood, sawdust, and other waste materials into wood briquettes. The ideal input material moisture content is between 8% and 12%, and particle size between 1 mm and 12 mm. Technical specifications: - Production capacity: 1,300 – 2,300 kg/h (with sawdust bulk density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression force: 2,000 – 2,500 kg/cm² - Vertical auger with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for closing the extrusion head: 1.5 kW - Feeder with adjustable-speed auger: 1.5 kW - Oil lubrication system for bronze bearings: 100 liters - Briquette output monitoring sensor (automatic shut-off when material runs out) - Guards for moving parts - Oil pressure sensor - Control panel - Hopper for input material (accumulator) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for full operation and integration into a briquetting line: ADDITIONAL EQUIPMENT – MB100: - Dosing silo: Made from heavy-duty steel construction. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material feeding is controlled by a level sensor. - 20-meter-long briquette cooling line - Automatic saw for briquette cutting - The saw automatically cuts briquettes to operator-preselected lengths. - Device for the production of briquettes with a hole - Briquetting press head cooling system with chilled water - The system produces 50 liters/minute of chilled water for efficient head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and large energy storage tank with water–refrigerant heat exchanger immersed inside. - Highly efficient fin-pack heat exchanger made of copper tubes and aluminum fins. - 800-liter water tank - Water supply pump (50 l/min – 20 m head – 0.55 kW) with three-way DN25 valves to control cooling water temperature in the briquetting press head. - Digital electronic temperature controller connected to NTC sensor (probe diameter 6 × 52 mm, IP68, AISI 316). OPTIONAL: NOVAPAC packer Optional additional purchase of a NOVAPAC packer, fully compatible with the Di Più BRIK MB100 and other machines, providing an ideal solution for automatic packaging directly after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the last 6 photos.

Gamybos metai: 2018, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: H3000TM, Universal Testing Machine H3000TM – Made in Germany Crosshead travel: 520 mm Working depth: 66 mm Overall height: 1010 mm Weight: 45 kg Test speed: 1 to 500 mm/min Return speed: 500 mm/min Displacement resolution: 0.01 mm We offer a very large selection of test fixtures: screw grips, wedge grips, pneumatic and hydraulic grips. Compression plates, bending devices, friction test jigs, and much more. Strain gauges, extensometers, long-travel sensors, clip-on transducers, climate chambers. Load cells available: 50N, 100N, 200N, 500N, 1000N, 2000N, or 3000N Including Hess software for Windows 8, 9, 10 or 11, enabling universal test routines, simple test operations also possible without a PC, and one 5 kN SP 56g screw grip with pyramid or rubber jaws (30x50 mm). Factory calibration certificate with DAkkS-calibrated measuring instruments. Calibration performed in both tension and compression in 10 steps. The H3000TM series universal testing machine is a single-column unit featuring a robust construction of aluminium and V2A stainless steel, with ball screw drives, linear ball bearings, and timing belt drive. The bellows cover provides protection for spindles and bearings. The device is microprocessor controlled, equipped with a membrane keypad. Position and force are displayed on a two-line LCD display. The testing machine can be used either in standalone mode or connected to a PC via a USB interface. Position measurement is carried out using an encoder, with a visible LCD resolution of 0.01 mm (internal resolution: 0.0001 mm). Supplied with a standard load cell offering 0.03% linearity and matching calibration. Optionally, a second channel for an additional load cell or displacement transducer can be added. The universal testing machine is available with two different travel ranges: 500 mm or 1200 mm (measured with load cell, without test fixtures). Scope of delivery: One load cell of your choice (50N, 100N, 200N, 500N, 1000N, 2000N, or 3000N), certificate, 220 V cable, USB cable, instruction manual, and CE declaration of conformity. 3000N Load Cell Measurement range: 1–3000N tension and compression, with nominal 2mV/V output signal, overload protection: +/- 100%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, including 1.5 m connection cable and calibration certificate. Fjdjt Rg H Aepfx Ahwjpd