Siūlų pjovimo staklės

HAZAKO bis 2 Zoll

Sąlyga: geras (naudotas), Gummiband-Strahlanlage mit Muldenband Max. Chargenvolumen: 800 L Max. Chargengewicht: 2.000 kg Max. Werkstückgewicht: 150 kg Trommeldurchmesser: 1.350 mm Trommelbreite: 1.350 mm Anzahl der Turbinen: 2 Leistung je Turbine: 11 kW Max. Turbinendurchsatz: kg/min Reinigungstyp: Luft Fundament: nicht erforderlich Gehäuseschutz: Mn (Manganstahl) Ihjdpfolf Hq Njx Af Iot Erforderlicher Luftdurchsatz: ja Gesamtbreite der Maschine: mm Gesamthöhe der Maschine: mm Gesamtlänge der Maschine: mm

Sąlyga: naujas, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and best-in-class performance when cutting specialty steels. • The electro-welded machine frame and steel saw bow meet all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and the speed is adjustable. • All machine movements (saw frame, vise, feed, saw band guides) are controlled by modern linear guides, ensuring high static and dynamic load capacity as well as minimal sliding friction. • Another key feature are the rollers for material positioning, driven by a hydraulic motor. They move at a right angle to the material, ensuring optimal clamping positioning. • Thanks to the height control of the saw band position, the operator can place the blade close to the top edge of the material. After the cut, the band automatically returns to its previous position. Alternatively, 'remain' at the lower position can be selected. During the cutting cycle, the software compares the sawing load with the preset value. Thus, the sawing system can be stopped in the event of irregularities. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures particularly smooth operation at a constant pressure. • Finely ground carbide inserts clamp the saw band, complete with lateral, hardened, adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. • The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. The tension is automatically released after a preset time if the machine is idle or after completion of a cycle. • Automatic version with CNC control in X-TECH 900 / 1200 models, with a feed length of 500 mm, available for high-volume production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, ensuring precise positioning even under maximum load. • All guided movements are driven by four recirculating ball guides, designed for high static and dynamic load capacity, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request. Ihsdpfsfg E Hpox Af Iet

Sąlyga: naudotas, Schneideanlage SECO 60″ x 0,375″ x 50.000 lb (A3791) ist die perfekte Lösung für das Längsschneiden von Coil-Material in Streifen mit einer maximalen Blechdicke von 0,375″ und einer maximalen Coil-Breite von 60″. Geeignet für kalt- und warmgewalzten Stahl Streifenbreite: 18-60″ 2-Gang-Getriebe, 200-500 FPM (Fuß/Minute) Materialdicke: 0,032″–0,375″ Komplette Linie mit folgenden Komponenten: L-förmiger Coil-Einfuhrwagen Maximale Coil-Gewicht: 40.000 lb Abwickler: Coil-Innendurchmesser: 23–30,50″ Coil-Außendurchmesser: maximal 72″ Maximales Coil-Gewicht: 40.000 lb Verschiebbarer Grundrahmen Hydraulische Spreizvorrichtung Anreiß- und Andrückrolle Ihjdpstiy Ntjfx Af Ijt 5-Walzen-Coil-Brechvorrichtung Einstellbare Einlaufkantenführungen Einlauf-Besäumschere Schneidkopf: 10″-Wellen 40-PS-Motorantrieb 2 Abfall-Aufhaspel Wickler: Coil-Außendurchmesser: max. 72″ Coil-Innendurchmesser: 24″ 150 PS DC-Motor Dreifach-Auslaufwendetisch 40.000 lb pro Arm Motorische Drehvorrichtung Komplette Linie mit Messern, Gummiwalzen und Distanzringen Steuerung, Hydraulik und Elektrik

Sąlyga: geras (naudotas), Gamybos metai: 2002, Manufacturer: BRÜCK Model: 12/1600 Iedehrnbkepfx Af Isht Load capacity: 12,000 kg Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Weight: approx. 14 t Without control cabinet.

Sąlyga: naudotas, Gamybos metai: 1970, Pressure: 63 t Throat depth: 250 mm Ijdpfocxxx Hox Af Ioht Stroke: 8-100 mm Table depth: 710 mm Table width: 500 mm Ram dimensions: 450x280 mm Ram adjustment: 63 mm Strokes per minute: 140 Total power requirement: 7 kW Machine weight approx.: 3.5 t

Gamybos metai: 1990, Sąlyga: beveik kaip naujas (naudotas), Gebrauchte Schuler Hydraulikpresse zu verkaufen Marke: Schuler Modell: Schuler EB 2-500-2,75-0,85 H-Rahmen Hydraulikpresse Presskraft: 500 Tonnen Tischabmessungen (X-Y/mm): 3000 × 1800 Ihodjhcnxropfx Af Ijt Stößelabmessungen (X-Y/mm): 3000 × 1800 Hub (X/mm): 850 Hübe pro Minute: 12 bis 24 Steuerung: Siemens S7 Neue Hydraulikpressen ebenfalls erhältlich

Gamybos metai: 1971, Sąlyga: geras (naudotas), Decoiler – Expanding Mandrel Decoiler with Coil Lifting Table Strip Width: 1,200 mm Isdjd Ha E Sspfx Af Ieht Strip Thickness: 0.3 – 5 mm Coil Weight: 10 t Mandrel Ø: 508 mm

Gamybos metai: 2000, Sąlyga: naudotas, Speed: 227 rpm, Power: 31 kW, Heating capacity: 7.8 kW, Length: 1952 mm, Width: 840 mm, Height: 1920 mm, Weight: 820 kg. Ihjdpfeduyyzsx Af Ijt

Sąlyga: geras (naudotas), Gamybos metai: 2002, Edge banding machine with jointing cutters, otherwise fully equipped. PU adhesive can be used. Ijdpfx Asgmn H Ajf Ieht

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Ihedpfjfxyhfjx Af Iet Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.