3690 litrų šildomas/aušinamas reaktorius iš V4A su sijos maišytuvuHANAG
8758
3690 litrų šildomas/aušinamas reaktorius iš V4A su sijos maišytuvu
HANAG
8758
fiksuota kaina neįskaitant PVM
20 500 €
Sąlyga
Naudotas
Vieta
Bremen 

Rodyti vaizdus
Rodyti žemėlapį
Duomenys apie mašiną
- Įrenginio aprašas:
- 3690 litrų šildomas/aušinamas reaktorius iš V4A su sijos maišytuvu
- Gamintojas:
- HANAG
- Modelis:
- 8758
- Sąlyga:
- naudotas
Kaina ir vieta
fiksuota kaina neįskaitant PVM
20 500 €
- Vieta:
- Bremen

Skambinti
Techniniai duomenys
- Bakelio talpa:
- 3 690 l
Pasiūlymo informacija
- Sąrašo ID:
- A20349560
- Nuorodos Nr.:
- 8758
- Naujinta paskutinį kartą:
- Data 2025.12.05
Aprašymas
GENERAL
Design: suspended
Remarks: Bearing ring made of Fe; manhole cover incomplete; on one vessel, most of the heating connections have been cut off and are included loose; one vessel is approx. 100 mm lower in total height due to different motor/gearbox units
Speed: 42 – 211 rpm
Internal diameter: 1,600 mm
Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified)
Overall height: 3,750 mm
Heating/Cooling: available
Hedpsxqax Eefx Abmsfr
Power: 3 kW
Max. permissible operating temperature: 200 °C
Max. permissible operating overpressure: 16.0 bar
Max. overpressure: 3.2 bar
Agitator: beam agitator
Support type: ring
Location: Bremen
Technical documentation: drawing, various documents, inspection certificate
Jacketed cylinder: half-pipe coil
Name plate:
Vacuum: 1.0 bar
Volume: 3,690 liters
Jacket volume: 145.0 liters
Cylinder wall thickness: 6 mm
Product-contact material: V4A 1.4435 (AISI316)
Condition: used
Cylindrical height: 1,380 mm
Previous application: pharmaceutical chemicals
VESSEL
Max. permissible operating temperature: 200 °C
HEATING/COOLING JACKET
Max. permissible operating vacuum: 1.0 bar
Bottom temperature control: half-pipe coil
EQUIPMENT
Manhole / dome: in the top head (DN 500)
Outlet: 130 mm
MATERIAL SPECIFICATION
Material tempering system: V2A 1.4301 (AISI304)
AGITATOR 1
Agitator manufacturer: Ekato
Voltage: 400 Volt
TECHNICAL DATA / DIMENSIONS
Bottom wall thickness: 6.1 mm
Agitator arrangement: centrally in the top head
Agitator features: slight differences in the agitator versions (Interprop beam agitator installed on the shaft for media up to approx. 3,000 mPas; on one vessel, an additional stabilizing propeller is installed on the shaft); speed range adjustable via external frequency converter (no longer available) (for one of the two agitators, this range is 25 – 126 rpm; partial technical documentation for agitators available)
Top head wall thickness: 7.9 mm
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
Design: suspended
Remarks: Bearing ring made of Fe; manhole cover incomplete; on one vessel, most of the heating connections have been cut off and are included loose; one vessel is approx. 100 mm lower in total height due to different motor/gearbox units
Speed: 42 – 211 rpm
Internal diameter: 1,600 mm
Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified)
Overall height: 3,750 mm
Heating/Cooling: available
Hedpsxqax Eefx Abmsfr
Power: 3 kW
Max. permissible operating temperature: 200 °C
Max. permissible operating overpressure: 16.0 bar
Max. overpressure: 3.2 bar
Agitator: beam agitator
Support type: ring
Location: Bremen
Technical documentation: drawing, various documents, inspection certificate
Jacketed cylinder: half-pipe coil
Name plate:
Vacuum: 1.0 bar
Volume: 3,690 liters
Jacket volume: 145.0 liters
Cylinder wall thickness: 6 mm
Product-contact material: V4A 1.4435 (AISI316)
Condition: used
Cylindrical height: 1,380 mm
Previous application: pharmaceutical chemicals
VESSEL
Max. permissible operating temperature: 200 °C
HEATING/COOLING JACKET
Max. permissible operating vacuum: 1.0 bar
Bottom temperature control: half-pipe coil
EQUIPMENT
Manhole / dome: in the top head (DN 500)
Outlet: 130 mm
MATERIAL SPECIFICATION
Material tempering system: V2A 1.4301 (AISI304)
AGITATOR 1
Agitator manufacturer: Ekato
Voltage: 400 Volt
TECHNICAL DATA / DIMENSIONS
Bottom wall thickness: 6.1 mm
Agitator arrangement: centrally in the top head
Agitator features: slight differences in the agitator versions (Interprop beam agitator installed on the shaft for media up to approx. 3,000 mPas; on one vessel, an additional stabilizing propeller is installed on the shaft); speed range adjustable via external frequency converter (no longer available) (for one of the two agitators, this range is 25 – 126 rpm; partial technical documentation for agitators available)
Top head wall thickness: 7.9 mm
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
Tiekėjas
Pastaba: Užsiregistruokite nemokamai arba prisijunkite, kad gautumėte visą informaciją.
Registruota nuo: 2019
Pateikti užklausą
Telefonas & Faksas
+49 421 5... skelbimai
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida













































































