Aukšto slėgio siurblio įrenginys 600bar 66l/min

Hammelmann HDP 127

Gamybos metai: 2012, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: B2.01127.1899, Stationary high-pressure pump unit Hammelmann HDP 127 on base frame. Similar but not Kamat, Uraca, or Woma. Pump type: HDP 127 Operating pressure: 650 bar Flow rate: 72 l/min. Drive speed: 1500 rpm Drive power: 87 kW With EMK KAE2G280M-4B3E3K electric motor 90 kW, IP55, IE3 With pressure control valve, With safety valve, With oil cooling system. Dimensions (LxWxH): approx. 1,700x850x1,350 mm Weight: approx. 1,200 kg Year of manufacture: 2012 Gedsix I H Uspfx Ap Ieuc Condition: In very good used condition.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 With specified tools and sub spindle Control: Mazatrol PC Fusion CNC 640T Technical Data: Max. swing diameter: 525 mm Max. swing diameter over cross slide: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° - 360°/0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions/5° Tool turret: Number of tool stations: 12 (flexibly equipped with stationary and driven tools) Turret indexing time: - 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travel paths: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Rapid traverse: X-axis: 30 m/min Gsdpfox Hgl Hsx Ap Ijuc Z-axis: 30 m/min B-axis: 18 m/min Feed range: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min

Būklė: naujas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Stock machine "NEW" – available at short notice! (subject to prior sale) Control Unit: FANUC 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC storage LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Travel Ranges: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear Guides & Speeds: Ball guides on X/Y axis Roller guides on Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate when milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool Magazine (CAM-Type) / Changer: Number of magazine positions: 30 Guedpfxsifn N Nj Ap Ijc System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent empty slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/continuous): 18.5/11 kW 15,000 rpm direct drive spindle Spindle oil cooler Coolant, Chip, and Compressed Air Management: Coolant system incl. 300-liter tank and pumps External coolant around the spindle Chip augers right and left in the machine bed Compressed air nozzle on the spindle (M32/M33) Compressed air through the spindle (M38/M39) Compressed air and coolant gun Other Features: Swiveling control panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger on control cabinet Auto power OFF function Hand tool set Signal beacon Transformer 400 VAC, 50 Hz CE Declaration of Conformity in accordance with European directives Electrical and Pneumatic Requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Special Equipment Included: Spindle: - Direct drive spindle SK-40, 15,000 rpm - Drive power (30min/continuous): 18.5 / 15 kW, (FANUC motor) Tool Magazines / Changers: - Drum magazine with 30 stations, DIN69871, SK-40 Rotary or Additional Axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, Chip, and Compressed Air Management: - Bed flush - CTS coolant pump with 20 bar pressure for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip trolley (chip discharge to front on left machine side) Measuring and Monitoring Systems: - RENISHAW OMP-60 touch probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ laser tool measurement system and tool breakage control in the machine, incl. mount - Auto door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown with RoboJob Mill Assist 25kg (year 2025 – NEW) - Full enclosure - Double gripper Available immediately

Būklė: naudotas, Gamybos metai: 2002, Max. turning diameter: 300 mm Max. turning length: approx. 550 mm Control: PC Fusion CNC 640 T Standard turning diameter: 276 mm Max. swing diameter: 525 mm Distance spindle nose – turret facing surface: 115 – 690 mm Main spindle speed range: 35 – 4,000 rpm Main spindle drive power: 22 kW Max. torque: 351 Nm Spindle nose: A2-6" Spindle bore: 76 mm Max. usable bar diameter: 64 mm Max. chuck diameter: 250 mm C-axis: 360° Number of tool stations: 12 positions Tool holder: VDI 40 Tool shank diameter: 25 mm Drill shank diameter: 40 mm Turret indexing time: 0.2 / 0.6 sec Gedpfsxmagusx Ap Ijuc Driven tool speed range: 25 – 4,500 rpm Driven tool drive power: 3.7 kW Max. torque (driven tools): 35 Nm Counter spindle speed range: 35 – 4,000 rpm Counter spindle drive power: 7.5 kW Max. torque (counter spindle): 57 Nm Max. chuck diameter (counter spindle): 150 mm X-axis: 190 (185 + 5) mm Z-axis: 575 (580 + 5) mm Counter spindle travel B: 585 (580 + 5) mm C-axis: 360° Rapid traverse X/Z: 30 m/min Rapid traverse C: 400 rpm Rapid traverse B: 18 m/min Feed rate X/Z: 0 – 5,000 mm/min Feed rate C: 1 – 2,000 °/min Total power requirement: 34 kVA Machine weight: approx. 5.9 t Space requirements: approx. 5.0 x 3.0 x 2.5 m CNC Turning and Milling Center MAZAK – Super Quick Turn 250 MS - Main and sub spindle - Driven tools - C-axis

Būklė: naudotas, System: Used piston diaphragm high-pressure pump / feed pump Gededkdi Topfx Ap Ijuc Type: HMD-G-50-500 Flow rate: 40.0 m³/h Pressure: 1.6 MPa

Būklė: naudotas, Mount: MK 4 Gjdpfxob N Ezrs Ap Ieuc

Būklė: geras (naudotas), Gamybos metai: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid radial drilling machine - Clamping table: 400 x 1100 mm - Arm reach: 930 mm - Taper: MT4 - Motor power: 1.35/1.8 kW Gujdpfx Aoirax Uep Isc - Spindle speeds: 41-1700 rpm - Column diameter: Ø 200 mm - Spindle stroke: 125 mm - Thread cutting device: YES - Feed: 0.075 - 0.3 mm/rev - Dimensions: 1800/1235/H2240 mm - Weight: 1500 kg

Būklė: naudotas, Gamybos metai: 1989, Used, well-maintained GEIBEL+HOTZ surface grinding machine, model FS 50 SA Grinding area: 500 x 250 x 375 mm, vertical automatic feed Godpfx Apjwq Nc Ns Ijuc with electro-magnetic fine-pole chuck, grinding wheel diameter: 300 x 50 x 76.2 mm, with paper band filter system, manual dresser mounted on top. Various wheels and flanges included. Weight: approx. 2,400 kg Footprint approx. 2,500 x 1,800 x height 2,500 mm The machine is located at our facility in 71334 Waiblingen-Beinstein and can, of course, be inspected. Please contact us for further information.

Būklė: naujas, With the Brugger Power Split S22, we present a powerful vertical log splitter that impresses with a splitting force of 22 tonnes. This robust machine is ideally suited for a wide range of applications and offers maximum flexibility in terms of drive options—whether via electric motor or PTO shaft. Splitting is performed in two speed stages, enabling fast and efficient wood processing. Key features: - 22T splitting force - Combination drive: 5kW electric motor & PTO shaft drive - Weight: 335kg - Log length up to 110cm - Log lifter - Two speed settings The scope of delivery includes a log lifter, which makes handling heavy logs much easier. An optional hydraulic winch is available, offering additional application possibilities and further simplifying operation. With a maximum splitting length of 110 cm, the Brugger Power Split S22 provides the flexibility to effortlessly process even larger logs. A support table for shorter pieces of wood is included as well. The Brugger Power Split S22 is the ideal choice for anyone seeking a reliable and high-performance solution for log splitting—whether for professional use or private applications. Prices: Power Split S22 = €2,670 Gujdpfx Ajtrlv Sjp Ijc Power Split S30 (30 tonnes) = €2,960 Support table for short wood = €125 4-way splitting wedge = €99 Hydraulic winch = €595 Contact us for your customised quote!

Būklė: naujas,