Hidraulinė presas

HACO PHD 1600T

Hydraulic Tryout Press
Manufacturer: SCMB
The machine offered is a hydraulic tryout press.
This press underwent a comprehensive general overhaul in 2014 by a specialized company in Germany. During this process, the mechanics, electrics, and hydraulics were completely renewed and modernized.
Only components from renowned European manufacturers were used for the overhaul.
A particular highlight of this tryout press is that both the ram and the worktable are equipped with draw cushions.
The worktable is designed as a movable table. The ram can be stopped in any desired position and mechanically locked as required.

Technical Data
Manufacturer: MW/SCMB
Model: PHD1600 T
Press force (ram): 16,000 kN
Stroke (max.): 1,200 mm
Distance between ram and table: 2,350 mm
Ram plate (dimensions): 5,000 × 2,800 mm
Ejector force (ram): 2,000 kN
Ejector stroke (max.): 150 mm
Ejector plate (dimensions): 3,700 × 1,300 mm
Main motor power: 3 × 110 kW at 1,500 rpm
Auxiliary motor power: n/a (1,500 rpm)
Sliding table (dimensions): 5,000 × 2,800 mm
Rapid advance: 300 mm/s
Working speed (50% nominal force): 34 mm/s
Working speed (100% nominal force): 17 mm/s
Return speed: 300 mm/s
Return force (gross): 1,660 kN
Lower cushion force: 4 × 1,000 kN
Lower cushion stroke (max.): 280 mm
Lower cushion dimensions: 3,920 × 1,680 mm

The above information is taken from the machine documentation. The seller assumes no liability for its completeness or accuracy. The actual technical data and functions of the machine are decisive.

Toolmaking (Tryout / Spotting)
Nedpfxeyxhq Ij Afnswd

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.